Page 16 / 91
Scroll up to view Page 11 - 15
BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE
16
M A C O S X 10.4
To
access
t he
dialog
box
t hat
allows
you
to
configure
your
network
connection.
Browse
to
t he Apple menu and select System Preferences. From t he System Preferences menu, click t he
Network icon and t hen select t he Et hernet connection.
DHCP MODE
You
can
set
your
Mac
to
DHCP
by
selecting
DHCP
from
t he
Configure
drop
down
list.
After
clicking Apply, your Mac’s IP Address will now be automatically assigned from t he Gateway.
STATIC MODE
1.
From t he Configure drop down list, you can set your computer to Static IP mode by selecting
t he option Manually.
The following steps show how to assign a Static IP address to your Mac
Page 17 / 91
BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE
17
±.
Choose
an
IP
address
between
10.0.0.1
–
10.0.0.±54
(Do
not
choose
t he
Gateway
IP
of
10.0.0.138). enter t his IP address into t he field marked IP Address, and enter a Subnet Mask of
±55.±55.±55.0
3.
Set t he Router and DNS server field to
10.0.0.138 (The gateway’s IP address).
NOTE:
The IP address of t he gateway is
10.0.0.138. (default), so t he computer must be set wit h a different IP
to t he gateway. In t he case below, t he PC’s IP address is set as 10.0.0.±
4.
Click Apply to submit t he settings.
Page 18 / 91
BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE
18
WINDOWS VISTA
To access t he dialog box t hat allows you to configure your network connection, click on Start >
Control Panel > Network Connections. Then right mouse click on t he Local Area Connection and
select Properties. Select Internet Protocol (TCP/IP) t hen select Properties
DHCP MODE
You can set your PC to DHCP mode by selecting Obtain an IP address automatically in t he dialog
box shown below.
Page 19 / 91
BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE
19
STATIC IP MODE
To configure your Gateway manually, your PC must have a static IP address wit hin t he Gateway’s
subnet.
The
following
steps
show
how
to
assign
a
Static
IP
address
to
your
PC
using
subnet
10.0.0.x.
1:
Select Use t he following IP Address. Choose an IP address between 10.0.0.1 – 10.0.0.±54
NOTE:
The Ip address of t he gateway is
10.0.0.138. (default), so t he PC must be set wit h a different Ip. In
t he case below, t he PC’s IP address is set as 10.0.0.1
±:
Set t he Router and DNS server field to
10.0.0.138 (The gateway’s IP address).
3.
Click Ok to apply t he settings.
Page 20 / 91
BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE
±0
3.3
DEFAULT SETTINGS
The following are t he default settings for t he Gateway
•
Local (LAN) access (username: admin, password: admin)
•
Remote (WAN) access (username: support, password: support)
•
User access (username: user, password: user)
•
•
Remote WAN access: disabled
•
NAT and firewall: enabled
•
Dynamic Host Configuration Protocol (DHCP) server on LAN interface: enabled
Technical Note:
During power on, t he device initializes all settings to default values. It will t hen read t he configuration
profile from t he permanent storage section of flash memory. The default attributes are overwritten when
identical attributes wit h different values are configured. The configuration profile in permanent storage
can be created via t he web user interface or telnet user interface, or ot her management protocols. The
factory default configuration can be restored eit her by pushing t he reset button for more t han five seconds
until t he power LED blinks or by clicking t he Restore Default Configuration option in t he Restore Default
Settings screen (see section 7.7.3).
19216811.live