BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE

76

FOR WINDOWS VISTA

±.

Open a web-browser (such as Internet explorer, Firefox or Safari)

3.

Type in t he address “\\GatewayName\USBDriveName\” (e.g. \\Bigpond±1\USB-Storage)

NOTE:

There is no username and password required to access t he USB drive. Any network user will be

able to read/write t he folder/files in t he USB drive.

TO MAP THE USB STORAGE DRIVE

To enable easy access to t he USB Storage Drive, you can map t he network location. To do t his,

use t he following steps:

5.

Click on t he Start button and click Computer

6.

Click t he Map network drive button

7.

In t he Folder field, enter t he address of t he USB Storage Drive \\GatewayName\USBDriveName

(e.g. \\Bigpond±1\USB-Storage)

8.

To access t he USB Storage Drive in t he future, you can simply double-click on t he item in

t he Computer menu

BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE

77

7.1±

SAVE AND REBOOT

This function saves t he current configuration settings and reboots your Gateway.

NOTE1:

It may be necessary to reconfigure your TCP/IP settings to adjust for t he new configuration. For

example, if you disable t he Dynamic Host Configuration Protocol (DHCP) server you will need to

apply Static IP settings.

NOTE±:

If you lose all access to your web user interface, simply press t he reset button on t he rear panel

for 5-7 seconds to restore default settings.

BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE

79

DIAGNOSTICS

The Diagnostics menu has t he following submenus:

•

Diagnostics

•

System Log

•

Next G™ Network

•

Statistics

•

Route

•

ARP

•

DHCP

•

PING

BigPond Elite™ Wireless Broadband Network Gateway USER GUIDE

80

8.1

DIAGNOSTICS

The Diagnostics menu provides feedback on t he connection status of t he device. The individual

tests are listed below. If a test displays a fail status:

1:

Click on t he Help link

±:

Now

click

Re-run

Diagnostic

Tests

at

t he

bottom

of

t he

screen

to

re-test

and

confirm

t he

error

3:

If t he test continues to fail, follow t he troubleshooting procedures in t he Help screen