TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
±3
4.1.1
Profile Setup
Telstra will provide the information required to complete the first time setup instructions below.
This includes profile,username and password.Only complete those steps for which you have
information and skip the others.
1.
If your SIM card is not inserted into the gateway,please turn the gateway off.Then insert the
SIM and turn the gateway on.
2. Type the APN in the APN field.Authentication Method should be provided by Telstra;or just
leave it AUTO if not acquired.If you have not received the username and password,leave these
fields empty.
3.
Select IP compression and Data compression to be ON or Off.By default they are set to off.
4.
Click the Save button to save the new settings.
5.
Press the Connect button to connect to Internet.The Device Info for 3G network box in the WUI
Basic screen should indicate an active connection,as shown below.The 3G and Internet LEDs on
the front panel of the Gateway should also be blinking.
.
If the LEDs are off,then either your profile settings are incorrect,the SIM card is not working
or the service network is unavailable.In either case,contact Technical Support for further
instructions.
NOTE:
If the LEDs light in an on/off pattern moving from left to right this indicates that your SIM is PIN Locked,please see
PIN Lock Off on page 24 for instruction on how to fix this
19216811.live