TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
8
1.3
LED INDICATORS
The LED indicators are shown in this illustration and followed by detailed explanations in the
table below.
LED
Icon
Color
Mode
Description
POWER
Blue
On
Power on
Off
Power off
Phone
Blue
On
Phone line active
Off
Phone line inactive or not connected
LAN 1~2
Blue
On
Powered device connected to the associated port (includes devices with
wake-on-LAN capability where a slight voltage is supplied to an Ethernet
connection)
Off
No activity, modem powered off, no cable or no powered device
connected to the associated port
Blink
LAN activity present (traffic in either direction)
Wi-Fi
Blue
On
Local Wi-Fi access to the Gateway is enabled and working
Off
Local Wi-Fi access to the Gateway is disabled
Blink
Data being transmitted or received over Wi-Fi.
Internet
Blue
Blink
Data is transmitted through Internet connection
Off
No connection to the internet or gateway powered off
On
Internet connection established
3G
Blue
On
Connection established with 3G network
Blink
Connecting with 3G network
Off
No connection with UMTS cellular station,no activity,gateway powered
off.
2G
Blue
On
Connection established with ±G network
Blink
Connecting to an EDGE,GPRS or GSM cellular station
Off
No connection with EDGE, GPRS or GSM cellular station, no activity or
gateway powered off.
Low
Blue
On
Low signal strength
Off
No activity,gateway powered off or on other signal strength
Med
Blue
On
Medium signal strength
Off
No activity,gateway powered off or on other signal strength
High
Blue
On
High signal strength
Off
No activity,gateway powered off or on other signal strength
NOTE:
The six LEDs on the left side of the top panel display (Low, Med, High, Internet, 3G, 2G) will cycle on and off if PIN
code protection is activated. In this case, you should consult section 4.2.1 PIN Code Protection (page 21) for further
instructions.
19216811.live