TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE

61

VOICE

TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE

6±

VOICE

The Turbo 7 Wireless Gateway with Voice allows you to make telephone calls over the Next G™

network using a standard Analogue Telephone via the built in RJ-11 Phone port.

Please refer to the documentation provided by the manufacturer of your Analogue Telephone for

help with the operation of your telephone.

8.1

CONFIGURING YOUR TURBO 7 WIRELESS GATEWAY FOR

PLACING VOICE CALLS

Once your Gateway has been correctly configured to access the Next G™ network as outlined

in Section 2.1 – Quick Setup,you can make and receive telephone calls after connecting your

Analogue Telephone to the socket labeled Phone on the back of your Turbo 7 Wireless Gateway

with Voice.

For voice calls over the Next G™ network,note that your SIM card needs to be provisioned for

Voice Calling.Please consult with Telstra for verification.Also please note that any telephone

calls placed using the Gateway will incur call usage charges at mobile call rates.Please contact

Telstra for more information.

STATUS

TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE

64

STATUS

THE STATUS MENU HAS THE FOLLOWING SUBMENUS:

•

Diagnostics

•

System Log

•

Next G™ network

•

Statistics

•

Route

•

ARP

•

DHCP

•

PING

TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE

65

9.1

DIAGNOSTICS

The Diagnostics menu provides feedback on the connection status of the device.The individual

tests are listed below.If a test displays a fail status:

1:

Click on the

Help link

2:

Now click

Re-run Diagnostic Tests

at the bottom of the screen to re-test and confirm the error

3:

If the test continues to fail,follow the troubleshooting procedures in the Help screen.