Page 56 / 116
Scroll up to view Page 51 - 55
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
56
7.3.2
Parental Control
Parental Control allows you to restrict access from a device on your Local Area Network (LAN)
to the Internet through the Gateway on selected days at certain times.Make sure to activate
the Internet Time server synchronization as described in section 6.4 SNTP,so that the scheduled
times match your local time.
Click Add to display the following screen.Enter the MAC address of the device that you wish to
restrict access for and select days of the week and times to apply the restriction.
Complete the fields listed below and click
Save/Apply
to apply the settings.
Options
Description
User Name
A user-defined label for this restriction
Browser’s MAC
Address
Allows easy identification of MAC address of the computer running the
browser
Other MAC Address
MAC address of another LAN device
Days of the Week
Select one more more days for the restrictions to apply to.
Start Blocking Time
Enter the time you want the restriction to start
End Blocking Time
Enter the time you want the restriction to end
Page 57 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
57
7.4
ROUTING
Default Gateway
,
Static Route
and
Dynamic Route
settings can be found in the Routing link
as illustrated below.
7.4.1
Default Gateway
If the
Enable Automatic Assigned Default Gateway
checkbox is selected, this device will accept
a default Gateway assignment.If the checkbox is not selected,a field will appear allowing you to
enter the static default gateway and/or WAN interface,then click
Save/Apply
.
NOTE:
After enabling the Automatic Assigned Default Gateway, you must re-boot the Gateway to activate the assigned
default Gateway.
Page 58 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
58
7.4.2
Static Route
The Static Route screen displays the configured static routes.
Click the Add or Remove buttons to change settings.
Click the Add button to display the following screen.
Enter Destination Network Address,Subnet Mask,Gateway IP Address and/or WAN Interface.
Then click Save/Apply to add the entry to the routing table.
Page 59 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
59
7.4.3
Dynamic Route
To activate this option,select the Enabled radio button for Global RIP Mode.
To configure an individual interface,select the desired RIP version and operation,followed
by placing a check in the Enabled checkbox for that interface.Click Save/Apply to save the
configuration and to start or stop dynamic routing.
7.5
DOMAIN NAME SERVERS (DNS)
7.5.1
DNS Server Configuration
If the Enable Automatic Assigned DNS checkbox is selected,this device will accept the first
received DNS assignment from the Wide Area Network (WAN) interface during the connection
process.If the checkbox is not selected,a field will appear allowing you to enter the primary and
optional secondary DNS server IP addresses.Click on
Save
to apply.
NOTE:
Click the Save button to save the new configuration. To make the new configuration effective, reboot your Gateway.
Page 60 / 116
TELSTRA TURBO 7 WIRELESS GATEWAY (3G10WVT) - USER GUIDE
60
7.5.2
Dynamic DNS
The Dynamic DNS service allows a dynamic IP address to be aliased to a static hostname in any of
a selection of domains,allowing the gateway to be more easily accessed from various locations on
the internet.
Note:
The Add/Remove buttons will be displayed only if the gateway has been assigned an IP address from the remote server.
To add a dynamic DNS service,click the Add button and this screen will display.
Options
Descriptions
D-DNS provider
Select a dynamic DNS provider from the list.
Hostname
Enter the name for the dynamic DNS server.
Interface
Select the interface from the list.
Username
Enter the username for the dynamic DNS server.
Password
Enter the password for the dynamic DNS server.
19216811.live