1. Home
    2. /
  2. Manuals
    3. /
  3. Motorola
    4. /
  4. MG7550
    5. /
  5. 10
Page 46 / 63 Scroll up to view Page 41 - 45
You may also find the device’s MAC Address by looking at the client list on
your MG7550. Click Basic Router
Æ
DHCP and look at the MAC Addresses in
the DHCP Client List:
You may have to do a little sleuthing to find your device’s MAC Address, for
example by turning the device off and on again to see which MAC Address is
removed and then restored to the list.
Setting up a Blacklist
Before you make any changes, make sure Parental Control at the top of the
page is Disabled, and click Save if you had to change this.
Under the tab List of Blocked Addresses (Blacklist), click the Add button to
the right. A set of fields will appear. Give your Blacklist a name, and then
type in the MAC Address of the device you want your Blacklist to apply to.
Use the format XX:YY:ZZ:WW:VV:UU.
Next, enter the URL of the first domain that you want to block, for example
BadSite.com.
If you want to the Blacklist to apply only during certain hours, enter the start
and stop times for the period you want the Blacklist to apply. If you want the
Blacklist to apply always, make sure to set the start time to 12:00 am and the
end time to 11:59 pm.
Next, select which protocols the Blacklist should apply to. If you’re not sure,
leave this selection at the default setting, BOTH.
Page 47 / 63
Here is an example entry to block access to BadSite.com at all times:
Finally, make sure to check the Enable box, and click the Save button.
Click the + sign to add another site to block for this device:
Now you can add another site, for example WorseSite.com, to the Blacklist:
Remember to click Save.
Click the + sign again to add more sites if you like.
Page 48 / 63
Click the Add button to configure a blacklist for another device, if you like.
When you have completed all Blacklists, remember to Enable Parental Control at
the top of the page, and click Save.
Setting up a Whitelist
Before you make any changes, make sure Parental Control at the top of the
page is Disabled, and click Save if you had to change this.
Under the tab List of Blocked Addresses (Whitelist), click the Add button to
the right. A set of fields will appear. Give your Whitelist a name, and then
type in the MAC Address of the device you want your Whitelist to apply to.
Use the format XX:YY:ZZ:WW:VV:UU.
Next, enter the URL of the first domain that you want to allow, for example
Jill _Site_1.com.
If you want to the Whitelist to apply only during certain hours, enter the start
and stop times for the period you want the Whitelist to apply. If you want the
Whitelist to apply always, make sure to set the start time to 12:00 am and the
end time to 11:59 pm.
Next, select which protocols the Whitelist should apply to. If you’re not sure,
leave this selection at the default setting, BOTH.
Finally, make sure to check the Enable box, and click the Save button.
Page 49 / 63
Here is an example entry to allow access to Jill_Site.com from 4:00 pm to 8:00
pm:
Now you can add another device, for example Joey’s PC, to the Whitelist. First
click the Add button.
Then enter the entry name, device MAC Address, site to allow, and start and
end time for the entry. In the example below, we have named the entry
Joeys_PC, and the site Joey_Safe_1.com, with active time from 10:00 am to
2:00 pm.
Remember to click Save.
Click the + sign to add another site to allow for this device:
Click the Add button to configure a Whitelist for yet another device, if you
like.
Page 50 / 63
When you have completed all Whitelists, remember to Enable Parental
Control at the top of the page, and click Save.
Setting up Times when Internet Access is Allowed and
Not Allowed
Before you make any changes, make sure Parental Control at the top of the
page is Disabled, and click Save if you had to change this.
You can set up times when Internet is allowed by configuring a Whitelist
entry with a universal URL. By doing this, you can allow Internet access for a
particular device only during hours that you specify. Access will be allowed to
all Internet sites. Internet access will not be allowed to any site outside of
the hours that you specify.
Under the tab, List of Allowed Addresses (Whitelist), click the Add button to
the right. A set of fields will appear. Give your Whitelist a name, and then
type in the MAC Address of the device you want your Whitelist to apply to.
Use the format XX:YY:ZZ:WW:VV:UU.
In this case, enter . (that is, the single character ‘dot’ or ‘period’) as the URL.
Parental Control will interpret this to apply to all websites.

Rate

4 / 5 based on 3 votes.

Popular Motorola Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top