Motorola 3347 Qwest Router Manual PDF (Setup & Configuration Guide)

Page 296 / 351 Scroll up to view Page 291 - 295

296

[ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]

Assigns a priority to the

ulaw

codec, the common analog voice encoding method used

in

North America.

set voip phone [ 0 | 1 ] codec G729A priority

[ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]

Assigns a priority to the

G729 annex A

codec, the common analog voice compression

implementation used in North America.

set voip phone [ 0 | 1 ] codec G726_16 priority

[ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]

Assigns a priority to the

G726-16

codec, a common audio media type implementation at

16 kbit/s.

set voip phone [ 0 | 1 ] codec G726_24 priority

[ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]

Assigns a priority to the

G726-24

codec, a common audio media type implementation at

24 kbit/s.

set voip phone [ 0 | 1 ] codec G726_32 priority

[ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]

Assigns a priority to the

G726-32

codec, a common audio media type implementation at

32 kbit/s.

set voip phone [ 0 | 1 ] codec G726_40 priority

[ 1 | 2 | 3 | 4 | 5 | 6 | 7 | none ]

Assigns a priority to the

G726-40

codec, a common audio media type implementation at

40 kbit/s.

set voip phone [ 0 | 1 ] sip-advanced-setting sip-dtmf-mode

[ inband | rfc2833 | info ]

sip-dtmf-mode

– sets the Dual Tone Multi-Frequency Mode:

Page 297 / 351

297

CONFIG Commands

•

inband

: sends the DTMF digits as a normal inband tone.

•

rfc2833

: sends the DTMF digits as an event as part of the RTP packet header

information.

•

info

: sends the DTMF digits in the SIP INFO message.

set voip phone [ 0 | 1 ] sip-advanced-setting sip-end-of-dial-marker

[ off | on ]

sip-end-of-dial-marker

– turns an “end of dial” (#) signal that indicates that the dialed

number is complete

on

or

off

.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

call-forwarding-all-option [ off | on ]

call-forwarding-all-option

– turns unconditional call forwarding

on

or

off

.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

call-forwarding-all-number

phone_number

call-forwarding-all-number

– speciﬁes the number to which calls are to be forwarded

when

call-forwarding-all-option

is

on

.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

call-forwarding-on-busy-option [ off | on ]

call-forwarding-on-busy-option

– turns call forwarding when the line is busy

on

or

off

.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

call-forwarding-on-no-answer-option [ off | on ]

call-forwarding-on-no-answer-option

– turns call forwarding when there is no answer

on

or

off

.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

call-forwarding-on-no-answer-number

phone_number

call-forwarding-on-no-answer-number

– speciﬁes the number to which calls are to be

forwarded when

call-forwarding-on-no-answer-option

is

on

.

Page 298 / 351

298

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

call-waiting-option [ off | on ]

call-waiting-option

– enables or disables call waiting.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

call-conferencing-option [ off | on ]

call-conferencing-option

– enables or disables 3-way call conferencing.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

subscribe-do-not-disturb-option [ off | on ]

subscribe-do-not-disturb-option

– enables or disables option to prevent the phone from

ringing.

set voip phone [ 0 | 1 ] sip-advanced-setting call-feature

subscribe-mwi-option [ off | on ]

subscribe-mwi-option

– if set to

on

,

the Message Waiting Indicator is enabled when new voice

mail is received.

set voip phone [ 0 | 1 ] sip-advanced-setting dsp-settings echo-option

[ echo-off | echo-on | echo-on-nlp | echo-on-cng-nlp ]

echo-option

– speciﬁes under what conditions the system invokes or disables echo can-

cellation. Default is

echo-on-cng-nlp

(Comfort Noise Generation with non-linear proces-

sor).

set voip phone [ 0 | 1 ] sip-advanced-setting dsp-settings

echo-start-attenuation [ 0 - 65535 ]

echo-start-attenuation

– speciﬁes the minimum attenuation level at which to invoke echo

cancellation. Default is

8192

.

set voip phone [ 0 | 1 ] sip-advanced-setting dsp-settings

Page 299 / 351

299

CONFIG Commands

echo-max-attenuation [ 0 - 65535 ]

echo-max-attenuation

– speciﬁes the maximum attenuation level at which to invoke echo

cancellation. Default is

16384

.

set voip phone [ 0 | 1 ] sip-advanced-setting dsp-settings

echo-tail-length [ 0 - 65535 ]

echo-tail-length

– speciﬁes the duration of an echo tail required to invoke cancellation.

Default is

0

.

set voip phone [ 0 | 1 ] sip-advanced-setting dsp-settings

vad-option [ off | on ]

vad-option

– turns Voice Activity Detection on or off. Default is

off

.

set voip phone [ 0 | 1 ] sip-advanced-setting dsp-settings

vad-setting [ vad-cn | vad-std-sid | vad-suppress-sid ]

When

vad-option

is set to

on

:

•

vad-cn

– enables Voice Activity Detection/Comfort Noise Generation. When speech is

not present, the CNG algorithm generates a noise signal at the level sent from the

transmit side.

•

vad-std-sid

– enables Voice Activity Detection with standard Silence Insertion Descrip-

tor support.

•

vad-suppress-sid

– enables Voice Activity Detection but suppresses standard Silence

Insertion Descriptor support.

Example

set voip phone: 0 sip-option on

set voip phone: 0 sip-proxy-server "10.3.1.129"

set voip phone: 0 sip-proxy-server-domain ""

set voip phone: 0 sip-proxy-server-transport UDP

set voip phone: 0 sip-registrar-setting sip-registrar-server "10.3.1.129"

set voip phone: 0 sip-registrar-setting sip-registrar-server-transport UDP

set voip phone: 0 sip-registrar-setting sip-expires-time 3600

set voip phone: 0 sip-out-proxy-server "10.3.1.129"

set voip phone: 0 sip-user-display-name "4004"

set voip phone: 0 sip-user-name "4004"

set voip phone: 0 sip-user-password "4004"

Page 300 / 351

300

set voip phone: 0 auth-id "4004"

set voip phone: 0 codec G711A priority 1

set voip phone: 0 codec G711U priority 2

set voip phone: 0 codec G729A priority 3

set voip phone: 0 codec G726_16 priority 4

set voip phone: 0 codec G726_24 priority 5

set voip phone: 0 codec G726_32 priority 6

set voip phone: 0 codec G726_40 priority 7

set voip phone: 0 sip-advanced-setting sip-dtmf-mode rfc2833

set voip phone: 0 sip-advanced-setting sip-end-of-dial-marker off

set voip phone: 0 sip-advanced-setting call-feature call-forwarding-all-

option off

set voip phone: 0 sip-advanced-setting call-feature call-forwarding-on-busy-

option off

set voip phone: 0 sip-advanced-setting call-feature call-forwarding-on-no-

answer-option off

set voip phone: 0 sip-advanced-setting call-feature call-waiting-option off

set voip phone: 0 sip-advanced-setting call-feature call-conferencing-option

off

set voip phone: 0 sip-advanced-setting call-feature subscribe-do-not-

disturb-option off

set voip phone: 0 sip-advanced-setting call-feature subscribe-mwi-option off

set voip phone: 0 sip-advanced-setting dsp-settings echo-option echo-on-cng-

nlp

set voip phone: 0 sip-advanced-setting dsp-settings echo-start-attenuation

8192

set voip phone: 0 sip-advanced-setting dsp-settings echo-max-attenuation

16384

set voip phone: 0 sip-advanced-setting dsp-settings echo-tail-length 0

set voip phone: 0 sip-advanced-setting dsp-settings vad-option off

set voip phone: 1 sip-option on

set voip phone: 1 sip-proxy-server "10.3.1.129"

set voip phone: 1 sip-proxy-server-domain ""

set voip phone: 1 sip-proxy-server-transport UDP

set voip phone: 1 sip-registrar-setting sip-registrar-server "10.3.1.129"

set voip phone: 1 sip-registrar-setting sip-registrar-server-transport UDP

set voip phone: 1 sip-registrar-setting sip-expires-time 3600

set voip phone: 1 sip-out-proxy-server "10.3.1.129"

set voip phone: 1 sip-user-display-name "4005"

set voip phone: 1 sip-user-name "4005"

set voip phone: 1 sip-user-password "4005"

set voip phone: 1 auth-id "4005"

set voip phone: 1 codec G711A priority 1

set voip phone: 1 codec G711U priority 2

set voip phone: 1 codec G729A priority 3

set voip phone: 1 codec G726_16 priority 4

set voip phone: 1 codec G726_24 priority 5

set voip phone: 1 codec G726_32 priority 6

set voip phone: 1 codec G726_40 priority 7

Rate

Popular Motorola Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share