MediaLink MWN-WAPR150N Router Manual PDF (Setup & Configuration Guide)

Page 41 / 76 Scroll up to view Page 36 - 40

MWN-WAPR150N Wireless Router

±

WPA Algorithms

：

Provides TKIP [Temporal Key

Integrity Protocol] or AES [Advanced Encryption

Standard]. The default is AES mode.

±

Pass Phrase

：

Create a password using 8-63 ASCII

characters

(case-sensitive

letters,

numbers

and

symbols are allowed).

±

Key Renewal Interval

：

Set the key’s renewal period.

(3600 is the default)

6.2.3 WPA2- Personal

WPA2 (Wi-Fi Protected Access version 2) provides higher

security than WEP (Wireless Equivalent Privacy) and WPA

(Wi-Fi Protected Access) however, can slow your connection.

±

WPA Algorithms

Provides TKIP [Temporal Key

：

37

Page 42 / 76

MWN-WAPR150N Wireless Router

Integrity Protocol] or AES [Advanced Encryption

Standard]. The default is AES mode.

±

Pass Phrase

：

Create a password using 8-63 ASCII

characters

(case-sensitive

letters,

numbers

and

symbols are allowed).

±

Key renewal Interval

：

Set the key’s renewal period.

(3600 is the default)

6.3 Advanced Settings

This section is to configure the advanced wireless setting of

the Router, including the Radio Preamble, 802.11g/n Rate,

Fragmentation Threshold, RTS Threshold, etc.

±

BG protection Mode:

Auto by default. It is for 11b/g

wireless client to connect to 11n wireless network

38

Page 43 / 76

MWN-WAPR150N Wireless Router

smoothly in a complicated wireless area.

±

Basic Data Rates:

For different requirement, you can

select one of the suitable Basic Data Rates. Here, default

value is (1-2-5.5.-11Mbps…).

It is recommended not to

modify this value.

±

Beacon Interval:

Set the beacon interval of wireless

radio. Default value is 100.

It is recommended not to

modify this value.

±

Fragment Threshold:

The fragmentation threshold

defines the maximum transmission packet size in bytes.

The packet will be fragmented if the arrival is bigger

than the threshold setting. The default size is 2346

bytes. It is recommended not to modify this value.

±

RTS Threshold:

RTS stands for “Request to Send”. This

parameter controls what size data packet the frequency

protocol issues to RTS packet. The default value of the

attribute is 2347. It is recommended not to modify this

value in SOHO environment.

±

TX Power:

Set the output power of wireless radio. The

default value is 100.

±

WMM Capable:

This will enhance the data transfer

performance of multimedia data when they’re being

transferred over wireless network. It is recommended to

enable this option.

±

APSD Capable:

It is used for auto power-saved service.

39

Page 44 / 76

MWN-WAPR150N Wireless Router

The default is disabled.

6.4 WPS Settings

WPS (Wi-Fi Protected Setting) can be easy and quick to

establish the connection between the wireless network

clients and the device through encrypted contents. The users

only enter PIN code or press WLAN/WPA button on the panel

to configure it without selecting encryption method and

secret keys by manual. In the “WLAN Settings” menu, click

“WPS settings” to enter the next screen.

±

WPS settings

：

To enable or disable WPS function. The

default is “enable”.

±

WPS mode

Provide two ways: PBC (Push-Button

：

40

Page 45 / 76

MWN-WAPR150N Wireless Router

Configuration) and PIN code.

±

PBC

：

Select the PBC or press the WLAN/WPS button on

the back of the device for about one second and the WPS

indicator will be blinking for 2 minutes. While the light is

blinking, you can enable another device to implement

the WPS/PBC negotiation between them by pressing the

device’s WPS button. Two minutes later, the WPS

indicator will be off, which means the WPS connection is

completed. If more clients are added, repeat the above

steps. At present, the WPS supports up to 32 clients

access.)

±

：

If this option is enabled, you need to enter a

wireless client’s PIN code in the field and keep the same

code in the WPS client.

±

WPS Summary

：

Shows the current state of Wi-Fi

protected

setting,

including

authorized

mode,

encryption type, default key and other information.

±

WPS Current Status

：

Idle means WPS in idle state.

Start MSC process means the process has been started

and is waiting to be connected. Configured means the

negotiation is successful between server and clients.

±

WPS Configured

：

“Yes” means WPS feature is enabled

and active. “No” means it is not active. If a passphrase

or key is used with normal security settings, then “No”

will display here.

±

WPS SSID

Show the main SSID set by WPS.

：

±

WPS Auth. Mode

The authorization mode deployed

：

41

Rate

Popular MediaLink Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share