1. Home
    2. /
  2. Manuals
    3. /
  3. MediaLink
    4. /
  4. MWN-WAPR150N
    5. /
  5. 15
Page 71 / 76 Scroll up to view Page 66 - 70
MWN-WAPR150N Wireless Router
±
Restore:
Click this button to restore to default settings.
Factory Default Settings:
User Name:
admin
Password:
admin
IP Address:
192.168.0.1
Subnet Mask:
255.255.255.0
NOTE:
After restoring to default settings, please restart
the device, then the default settings can go into
effect.
12.5 Upgrade Firmware
The Router provides the firmware upgrade by clicking the
“Upgrade” after browsing the firmware upgrade packet which
you can download from www.medialinkproducts.com.
±
Browse:
click this button to select the upgrade file.
±
Upgrade:
click this button to start the upgrading
67
Page 72 / 76
MWN-WAPR150N Wireless Router
process. After the upgrade is completed, the Router will
reboot automatically.
12.6 Reboot the Router
Rebooting the Router makes the settings configured go into
effect or to set the Router again if setting failure happens.
Reboot the router:
Click this button to reboot the device.
12.7 Password Change
This section is to set a new user name and password to better
secure your router and network. (This is not necessary
unless you want to limit the people already on your network
from accessing the router’s settings.)
68
Page 73 / 76
MWN-WAPR150N Wireless Router
±
User Name
: Enter a new user name for the device.
±
Old Password
: Enter the old password.
±
New Password
: Enter a new password.
±
Re-enter to Confirm
: Re-enter to confirm the new
password.
NOTE:
The only people able to access the router’s GUI are
the people connected to your network through a
wired or wireless connection. Changing the
password to the GUI is not necessary unless you
want to restrict access to the GUI from devices
that are connected to the network. (For example: if
Parental Control is enabled, you may want to
change this password)
69
Page 74 / 76
MWN-WAPR150N Wireless Router
12.8 System Log
This section is to view the system log. Click the “Refresh” to
update the log. Click “Clear” to clear all shown information. If
the log is over 150 records, it will clear them automatically.
±
Refresh:
Click this button to update the log.
±
Clear:
Click this button to clear the current shown log.
12.9 Logout
After you have finished the settings completely, in logout
page click “OK” to logout of the router GUI.
70
Page 75 / 76
MWN-WAPR150N Wireless Router
Appendix 1
：
Glossary
Access
Point (AP)
: Any entity that has station functionality and
provides access to the distribution services, via the wireless
medium(WM) for associated stations.
Channel
: An instance of medium use for the purpose of
passing protocol data units (PDUs) that may be used
simultaneously, in the same volume of space, with other
instances of medium use(on other channels) by other
instances of the same physical layer (PHY),with an
acceptably low frame error ratio(FER) due to mutual
interference.
SSID:
Service Set identifier. An SSID is the network name
shared by all devices in a wireless network. Your network’s
SSID should be unique to your network and identical for all
devices within the network. It is case-sensitive and must not
exceed 20 characters (use any of the characters on the
keyboard).Make sure this setting is the same for all devices
in your wireless network.
WEP:
Wired Equivalent Privacy (WEP) is the method for
secure wireless data transmission.
WEP adds data
encryption to every single packet transmitted in the wireless
71

Rate

3.5 / 5 based on 2 votes.

Popular MediaLink Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top