1. Home
    2. /
  2. Manuals
    3. /
  3. Luxul
    4. /
  4. XBR-2300
    5. /
  5. 3
Page 11 / 52 Scroll up to view Page 6 - 10
luxul.com
|
357 South 670 West
|
Suite 160
|
Lindon, UT 84042
|
p: 801-822-5450
|
f: 801-822-5460
User Guide
11
4.6 Verifying Connectivity
After automatic configuration of the TCP/IP parameters, the ping command can be
used to check connectivity between the XBR-2300 and the client device.
Windows Devices:
1. Select Start >> Run input cmd in the Run line then press enter.
2. At the newly opened command interface enter the following command: ping
192.168.0.1 and press enter. If connected properly, the system should report back a
result as follows: packets sent=4, packets received=4, packets lost=0. This means
the device is connected with a valid IP address.
5: CONFIGURATION
This section introduces the configuration of the XBR-2300 Enterprise Dual-WAN
Router functions via the XenSmart™ Web-based management interface.
±
5.1 Login
±
5.2 Status
±
5.3 Network
±
5.4 Internet Access
±
5.5 Security
±
5.6 Advanced Settings
±
5.7 VPN
±
5.8 Monitor
±
5.9 System Tools
±
5.10 Logout
5.1 Login
Parameter:
Default Value
Default IP address:
192.168.0.3
Default user name:
admin
Default password:
admin
Login to the router with the following steps:
1. Plug an Ethernet cable into any of the three LAN ports of the router
2. Plug the other end into the Ethernet port of your computer
3. Power on the router
4. Check to see that the IP address of the computer is within this network segment:
192.168.0.xxx (“xxx” ranges 100~254). For example, 192.168.0.100.
5. Open the Web browser, and enter 192.168.0.1. The router login window appears,
as shown below.
Page 12 / 52
User Guide
12
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
6. Enter the user name and password (default user name and default password
are both set as “admin”), and then click “OK” to login to the switch
configuration window.
5.2 Status
5.2.1 WAN1
WAN1 displays the current WAN1 Connection Status, Connection Mode, WAN IP,
Subnet Mask, Gateway, DNS Server, Alternate DNS Server, WAN MAC Address, and
WAN Port Traffic, and Connection Time.
±
Connection Status:
Displays the WAN connection status
w
Disconnected: The WAN port has no connection to the Internet
w
Connecting: The WAN port is obtaining an IP address (Dynamic settings only)
w
Connected: The XBR-2300 is connected to the Internet
w
Network cable is not connected: No Cable Connected
±
Connection Mode:
Displays currently configured access mode
±
WAN IP:
IP address obtained from ISP (Dynamic only) or the Static address
assigned by the ISP
±
Subnet Mask:
The subnet mask obtained from ISP (Dynamic only) or the Static
Subnet Mask assigned by the ISP
±
Gateway:
The gateway obtained from ISP (Dynamic only) or the Static Gateway
assigned by the ISP
±
DNS:
The DNS server obtained from ISP (Dynamic only) or the Static DNS server
assigned by the ISP
Page 13 / 52
luxul.com
|
357 South 670 West
|
Suite 160
|
Lindon, UT 84042
|
p: 801-822-5450
|
f: 801-822-5460
User Guide
13
±
Alternate DNS:
Alternate DNS server obtained from ISP (Dynamic only) or the
Static Alternate DNS server assigned by the ISP
±
WAN MAC Address:
Displays the WAN MAC Address
±
WAN Port Traffic:
Indicates the current bandwidth being used (units are KB/s)
5.2.2 WAN2
WAN2 Status displays the current WAN2 Connection Status, Connection Mode,
WAN IP, Subnet Mask, Gateway, DNS Server, Alternate DNS Server, WAN MAC
Address, WAN Traffic and Connection Time.
±
Connection Status:
Displays the WAN connection status
w
Disconnected: The WAN port has no connection to the Internet
w
Connecting: The WAN port is obtaining an IP address (Dynamic settings only)
w
Connected: The XBR-2300 is connected to the Internet
w
Network cable is not connected: No Cable Connected
±
Connection Mode:
Displays currently configured access mode
±
WAN IP:
IP address obtained from ISP (Dynamic only) or the Static address
assigned by the ISP
±
Subnet Mask:
The subnet mask obtained from ISP (Dynamic only) or the Static
Subnet Mask assigned by the ISP
±
Gateway:
The gateway obtained from ISP (Dynamic only) or the Static Gateway
assigned by the ISP
±
DNS:
The DNS server obtained from ISP (Dynamic only) or the Static DNS server
assigned by the ISP
±
Alternate DNS:
Alternate DNS server obtained from ISP (Dynamic only) or the
Static Alternate DNS server assigned by the ISP
Page 14 / 52
User Guide
14
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
±
WAN MAC Address:
Displays the WAN MAC Address
±
WAN Port Traffic:
Indicates the current bandwidth being used (units are KB/s)
5.2.3 LAN
Displays the XBR-2300’s IP Address, Subnet Mask, LAN MAC Address, DHCP Server
status and NAT/NAT Entries.
±
IP Address:
Displays the IP address assigned to the XBR-2300. This address will be
the Gateway of all other devices on the network.
±
Subnet Mask:
Displays the subnet mask assigned to the XBR-2300
±
LAN MAC Address:
Displays the LAN MAC address assigned to the XBR-2300
±
DHCP Server:
Displays the status of the DHCP server (Enabled or Disabled)
±
NAT/NAT Entry:
Displays the status of NAT (Enabled or Disabled) and the cur-
rent number of NAT entries in use.
5.2.4 System
Displays the status of the XBR-2300s’ CPU Usage, Memory Usage, Uptime, System
time, number of Connected Clients, Firmware Version, Bootcore Version and
Hardware Version.
Page 15 / 52
luxul.com
|
357 South 670 West
|
Suite 160
|
Lindon, UT 84042
|
p: 801-822-5450
|
f: 801-822-5460
User Guide
15
±
CPU Usage:
Displays the percentage of CPU cycles currently occupied
±
Memory Usage:
Displays the current Memory usage
±
Uptime:
Displays the current total up time since last reboot
±
System Time:
Displays the current system time
±
Connected Clients:
Displays the current number of connected devices
configured by the DHCP server on the XBR-2300
±
Firmware Version:
Displays the XBR-2300 software version
±
Bootcore Version:
Displays the XBR-2300 bootcore version
±
Hardware Version:
Displays the XBR-2300 hardware version
5.3 Network
±
5.3.1 LAN Settings
±
5.3.2 WAN Settings
±
5.3.3 Dual-WAN Policy
±
5.3.4 DHCP Server
±
5.3.5 Connected Clients
±
5.3.6 Static Leases
±
5.3.7 DMZ
±
5.3.8 Access Control
±
5.3.9 Ethernet
±
5.3.10 MAC Address
5.3.1 LAN Settings
LAN Settings designate the IP Address and Subnet mask for the internal network.
±
MAC Address:
Displays the XBR-2300 LAN MAC address
±
IP Address:
Displays the LAN IP address. The factory default IP
address is 192.168.0.1
±
Subnet Mask:
Displays the LAN Subnet Mask

Rate

3.5 / 5 based on 2 votes.

Popular Luxul Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top