User Guide

46

© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

±

User Name:

User name to connect to the PPTP Server

±

Password:

Password to connect to the PPTP Server

±

Confirm Password:

Re-confirm the Password for connecting to the PPTP Server

±

Client is Local Network:

Select the access mode of the PPTP Client. The VPN

Server can be set to allow access to a single IP or to the entire internal network

NOTE:

You must choose network for the Client if the Client is another

Router.

Net Segment: PPTP Client network segment

Mask: PPTP Client Subnet Mask

Remark: Displays when the Client connection is used (optional)

5.7.2.3 Connected Clients

This page shows the information of PPTP Clients that are connected.

±

User name:

User name of PPTP Client

±

Internet IP:

PPTP Client remote IP address

±

Assign IP:

Internal IP address assigned by the PPTP Server

5.8 Monitor

There are three submenus in the Monitor section:

±

5.8.1 Statistics

±

5.8.2 Logs

±

5.8.3 Syslog

5.8.1 Statistics

Displays traffic statistics of the XBR-2300 by connected device.

luxul.com

|

357 South 670 West

|

Suite 160

|

Lindon, UT 84042

|

p: 801-822-5450

|

f: 801-822-5460

User Guide

47

±

Enable Traffic Statistics: Enables or Disables traffic statistics (Disabled by default).

NOTE:

It is recommended to use Traffic Statistics only when necessary

and then disable to ensure best possible network performance.

±

Refresh: Refreshes the Statistics list

5.8.2 Logs

The Logs page shows any alerts listed by the XBR-2300 including: Restarts, Attacks,

and VPN Connections.

5.8.3 Syslog

By default, the XBR-2300 will only display the most recent 256 log entries. If it is

necessary to save all logs generated, the XBR-2300 can be configured to send log

entries to a Log Server.

±

Server IP Address:

IP address of Log Server

±

Server Port:

Service port of Log Server

±

Enable:

Enables remote logging

5.9 System Tools

There are seven submenus in the System Tools section:

±

5.9.1 Time Settings

±

5.9.2 Backup and Restore

±

5.9.3 Firmware Upgrade

±

5.9.4 Policy Upgrade

±

5.9.5 Restore Factory Default

±

5.9.6 Reboot

±

5.9.7

Change Password/

Username

User Guide

48

© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

5.9.1 Time Settings

This is where the Time, Date and Time Zone are set for the XBR-2300.

Time zone can be manually set by the user or GMT can be automatically obtained

from the Internet. If the automatic GMT option is selected, time can only be set af-

ter the XBR-2300 has access to the Internet. Current time can also be set manually.

±

Enable Network Time:

System time is obtained automatically from the Internet

±

Update Interval:

Sets the time Adjusting Period for Daylight Savings

±

Time Zone:

Sets the Local Time Zone in which the XBR-2300 resides

5.9.2 Backup/Restore

This section allows you to Backup and Restore the XBR-2300 configuration.

±

Backup:

Click “Backup” to be given a Save Configuration dialog box

±

Restore:

Click “Browse” to select a saved Configuration file on your device

5.9.3 Firmware Upgrade

This section allows for the upgrade of the XBR-2300 Firmware. It is recommended

to check regularly for any Firmware updates.

Firmware upgrading steps

1.

Browse:

To select the path of the Firmware File

2.

Upgrade:

Performs the upgrade with the selected Firmware File

3.

Router automatically reboots after being upgraded

WARNING!:

Do not shut down power to the XBR-2300 during the

upgrade process or the router will be damaged. The XBR-

2300 will automatically restart after a successful upgrade.

The upgrade process may take several minutes to finish.

5.9.4 Policy Upgrade

Policy Upgrade updates the automatic filters on the device, creating a more secure

network. It is recommended to run this Upgrade periodically to obtain new defi

nitions.

luxul.com

|

357 South 670 West

|

Suite 160

|

Lindon, UT 84042

|

p: 801-822-5450

|

f: 801-822-5460

User Guide

49

Policy upgrading steps:

1.

Browse:

To select the current Policy File

2.

Upgrade:

Upgrades the XBR-2300 Policy File using the selected Policy File

5.8.5 Restore Defaults

This option can be used to restore the XBR-2300 to Factory Default Settings. This is

useful if there are any configuration errors.

±

Default Password:

admin

±

Default IP Address:

192.168.0.1

±

Default Subnet Mask:

255.255.255.0

NOTE:

Restore Factory Default only takes effect after the router

reboots

5.9.6 Reboot

Forces a Reboot of the XBR-2300. This option is used when a configuration change

requires a Reboot in order to take effect.

User Guide

50

© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.

5.9.7 Username/Password

This Page allows you to change the Username and Password of the XBR-2300

configuration interface.

±

Old User Name:

Current User Name

±

Old Password:

Current Password

±

New User Name:

The desired new User Name

±

New Password:

The desired new Password

CAUTION:

It is highly recommended that you change the default User

Name and Password for security.

5.10 Logout

Logs you out of the configuration interface of the XBR-2300.

6: REGULATORY COMPLIANCE

This device is approved under the Luxul brand and designed to comply for use spe-

cifically with other approved Luxul devices. This device is designed to be compliant

with rules and regulations in locations where they are sold and will be labeled as

required. Any changes or modifications to Luxul equipment, not expressly ap-

proved by Luxul, could void the user’s authority to operate the equipment. This

Luxul device when used in conjunction with the approved Luxul Models should be

professionally installed and the Radio Frequency Output Power will not exceed the

maximum allowable limit for those countries that have regulatory approval.

6.1 Health and Safety Recommendations

Warnings for the use of Wireless Devices: Please observe all warning notices with

regard to the usage of wireless devices

Potentially Hazardous Atmospheres: You are reminded of the need to observe

restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas

where the air contains chemicals or particles (such as grain, dust, or metal powders).