Page 16 / 85
Scroll up to view Page 11 - 15
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
16
Function buttons in this page:
Connect / Disconnect
The two buttons take effect only when PVC is configured as PPPoE/PPPoA mode. Click
Connect/Disconnect button to connect/disconnect the PPP dial up link.
Refresh
Click to display updated data since you opened this page.
4.1.2
Diagnostic Test
The Diagnostic Test page shows the test results for the connectivity of the physical layer and
protocol layer for both LAN and WAN sides.
Fields in this page:
Page 17 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
17
Field
Description
Select the Internet
Connection
The available WAN side interfaces are listed. You have to select one for
the WAN side diagnostic.
Function buttons in this page:
Run Diagnostic Test
Click to run the test and see the different layer of network statistics information.
4.1.3
Interfaces
You can view statistics on the processing of IP packets on the networking interfaces. You
will not typically need to view this data, but you may find it helpful when working with your
ISP to diagnose network and Internet data transmission problems.
Function buttons in this page:
Refresh
Click to display updated data since you opened this page.
4.1.4
ADSL
This page shows the ADSL line statistic information.
Page 18 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
18
4.2
Quick Setup
This page is used as a wizard to help you quickly configure the device. The page asks the user
for User name and password provided by the ISP for password protected connections. Once
the user types the ISP connection username and password, he can Commit and Reboot to let
the device saves configuration, negotiate with ISP automatically, communicate user name and
password and connect user in most cases automatically. (Internet LED is ON)
The user as well can configure the state of wireless radio, enabled or disabled, if enabled,
secure or not, what the SSID is? What the Encryption format and key are?
Wireless LAN is enabled by default.
User would better consult Wireless Section to read more about the details that show here.
User may disable wireless on this page until he is back with enough information to configure
wireless from its page.
Page 19 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
19
Function buttons in this page:
Commit and Reboot
Set new configuration. New parameters will take effect after save into flash memory and
reboot t
he system. See section “Admin” for save details.
4.3
LAN Interface
4.3.1
IP Address
This page shows the current setting of LAN interface. You can set IP address, subnet mask,
and IGMP Snooping for LAN interface in this page.
Page 20 / 85
User Manual
54 Mbps Wireless G Modem Router With 4 Port Switch
HN-DR4PG
20
Fields in this page:
Field
Description
IP Address
The IP address your LAN hosts use to identify the device’s LAN port.
Subnet Mask
LAN subnet mask.
Secondary IP
The second IP address your LAN hosts use to identify the device’s LAN
port.
IGMP Snooping
Enable/disable the IGMP snooping function for the multiple bridged
LAN ports.
Function buttons in this page:
Apply Changes
Set new configuration. New parameters will take effect after save into flash memory and
reboot the system. See section “Admin” for save details.
Undo
Discard your changes.
When
Secondry IP
is checked