Page 26 / 92 Scroll up to view Page 21 - 25
18
Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera
Setup Wizard
Compact Wireless-G Internet Video Camera
18. After the files have been successfully copied, the
Congratulations
screen will appear.
Install Viewer & Recorder Utility
. Click this button to install the Camera’s Utility on your PC.
Setup SoloLink DDNS Service
. Click the
Setup SoloLink DDNS Service
button to set up and configure the
Linksys Dynamic Domain Name System (DDNS) service.
User Guide
. Click this button to open the PDF file of this User Guide.
Exit
. Click the
Exit
button if you want to install the Camera’s Utility later.
Go to the “Placement Options” section.
Figure 5-18: Congratulations Screen
Downloaded from
www.Manualslib.com
manuals search engine
Page 27 / 92
19
Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera
Placement Options
Compact Wireless-G Internet Video Camera
Placement Options
The Camera can stand on a surface or be mounted on a wall. Depending on the positioning you want, you can
attach the Camera head to its stand at two different points.
Stand Option
1.
Insert the screw end of the stand into the hole on the bottom panel.
2.
Tighten the screw end and then the gray thumbscrew.
3.
Place the Camera, and adjust the tilt of its head accordingly.
Figure 5-19: Stand Option
Figure 5-20: Camera in
Standing Position
Downloaded from
www.Manualslib.com
manuals search engine
Page 28 / 92
20
Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera
Placement Options
Compact Wireless-G Internet Video Camera
Wall Mount Option
You will use the Camera’s stand to mount the Camera on a wall. Its stand has two wall-mount slots that are
spaced 58 mm (2.28 inches) apart.
1.
Insert the screw end of the stand into the hole on the back panel.
2.
Tighten the screw end and then the gray thumbscrew.
3.
Determine where you want to mount the Camera. Attach two screws to the wall, so that the Camera’s wall-
mount slots line up with the two screws.
4.
Maneuver the Camera so the screws are inserted into the two slots.
5.
Adjust the tilt of its head accordingly.
The installation of the Compact Wireless-G Internet Video Camera is complete. Go to “Chapter 6:
Installing the Compact Wireless-G Internet Video Camera Multi-Camera Viewer & Recorder Utility.”
If advanced users wish to access the Camera through its Web-based Utility, then proceed to “Chapter 8:
Using the Compact Wireless-G Internet Video Camera Web-based Utility.”
Figure 5-21: Wall Mount Option
Figure 5-23: Wall-Mount Slots
Figure 5-22: Camera in Wall-Mounting Position
58 mm
(2.28 inches)
Downloaded from
www.Manualslib.com
manuals search engine
Page 29 / 92
21
Chapter 6: Installing and Using the Compact Wireless-G Internet Video Camera Multi-Camera Viewer & Recorder Utility
Overview
Compact Wireless-G Internet Video Camera
Chapter 6: Installing and Using the Compact Wireless-G
Internet Video Camera Multi-Camera Viewer & Recorder Utility
Overview
This chapter will instruct you on how to install and use the Compact Wireless-G Internet Video Camera Multi-
Camera Viewer & Recorder Utility on your PC. The Utility allows you to easily view and record the Camera’s video.
If the Wireless-B or G Internet Video Camera Viewer & Recorder Utility has already been installed on your PC,
Linksys recommends that you uninstall it before you install the Compact Wireless-G Internet Video Camera Multi-
Camera Viewer & Recorder Utility (this Utility will also work with Wireless-B or G Internet Video Cameras).
Installing the Multi-Camera Viewer & Recorder Utility
1.
On the
Welcome
or
Congratulations
screen of the Setup Wizard, click the
Install Viewer & Recorder Utility
button.
2.
The
Welcome
screen will appear. Click the
Next
button to proceed.
Figure 6-1: Install Viewer & Recorder Utility Screen
Figure 6-2: Install Viewer & Recorder Utility -
Welcome Screen
NOTE:
To view video using a web browser, you must use Internet Explorer version 5.5 or higher. The
View Video feature will not work with Netscape. Netscape users should use the Multi-Camera Viewer
& Recorder Utility instead.
Downloaded from
www.Manualslib.com
manuals search engine
Page 30 / 92
22
Chapter 6: Installing and Using the Compact Wireless-G Internet Video Camera Multi-Camera Viewer & Recorder Utility
Installing the Multi-Camera Viewer & Recorder Utility
Compact Wireless-G Internet Video Camera
3.
The
Choose Destination Location
screen will appear. To install the Multi-Camera Viewer & Recorder Utility
files in the default folder, click the
Next
button. To select a different folder, click the
Change
button and follow
the on-screen directions.
4.
The
Ready to Install the Program
screen will appear. Click the
Install
button to begin the installation.
5.
When the setup is complete, click the
Finish
button.
To learn how to use the Multi-Camera Viewer & Recorder Utility, proceed to the next section, “Using the
Multi-Camera Viewer & Recorder Utility.”
To set up the Linksys SoloLink Service, go to “Chapter 7: Setting up the Linksys SoloLink DDNS Service.”
Advanced users: If you want to use the Camera’s Web-based Utility, go to “Chapter 8: Using the
Compact Wireless-G Internet Video Camera Web-based Utility.”
Figure 6-3: Choose Destination Location Screen
Figure 6-4: Ready to Install the Program Screen
Figure 6-5: InstallShield Wizard Complete Screen
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top