1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WVC54GC
    5. /
  5. 4
Page 16 / 92 Scroll up to view Page 11 - 15
8
Chapter 4: Connecting the Compact Wireless-G Internet Video Camera for Setup
Overview
Compact Wireless-G Internet Video Camera
Chapter 4: Connecting the Compact Wireless-G Internet Video
Camera for Setup
Overview
Before you set up the Camera, connect it to your wired network.
If you need to move the Camera from a wired network to a wireless network, or vice versa, go to this section,
“Moving the Camera to a Different Network.”
Connection to a Wired Network for Setup
1.
Connect the Ethernet network cable to your router, switch, or computer.
2.
Connect the other end of the cable to the Ethernet port on the Camera.
3.
Connect the power adapter to the Power port on the Camera.
4.
Plug the power adapter into an electrical outlet.
The Camera’s power LED flashes while the Camera is initializing. The Camera is ready for use when the LED is
solidly lit.
Proceed to “Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera.”
NOTE:
You MUST connect the Camera to a PC,
router, or switch using the Ethernet network
cable BEFORE powering on the Camera.
Otherwise, the Camera will not function.
Figure 4-2: Connect the Power Adapter
Figure 4-1: Connect the Ethernet Network Cable
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 92
9
Chapter 4: Connecting the Compact Wireless-G Internet Video Camera for Setup
Moving the Camera to a Different Network
Compact Wireless-G Internet Video Camera
Moving the Camera to a Different Network
When you move the Camera from a wired network to a wireless network, or vice versa, you must power off the
Camera before connecting to the new network. Proceed to the appropriate instructions.
To move the Camera from a wired network to a wireless network, follow these instructions:
1.
Unplug the power adapter from the Camera.
2.
Unplug the Ethernet network cable from the Camera.
3.
Re-connect the power adapter to the Power port on the Camera.
The Camera’s power LED flashes while the Camera is initializing. The Camera is ready for use when the LED is
solidly lit.
Proceed to “Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera.”
To move the Camera from a wireless network to a wired network, follow these instructions:
1.
Unplug the power adapter from the Camera.
2.
Connect the Ethernet network cable to your PC, router, or switch.
3.
Connect the other end of the cable to the Ethernet port on the Camera.
4.
Re-connect the power adapter to the Power port on the Camera.
The Camera’s power LED flashes while the Camera is initializing. The Camera is ready for use when the LED is
solidly lit.
Proceed to “Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera.”
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 92
10
Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera
Setup Wizard
Compact Wireless-G Internet Video Camera
Chapter 5: Setting up and Mounting the Compact Wireless-G
Internet Video Camera
Setup Wizard
The Compact Wireless-G Internet Video Camera Setup Wizard will guide you through the installation and
configuration procedure.
1.
Insert the Setup CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome
screen should appear. If it does not, click the
Start
button and choose
Run
. In the field provided,
enter
D:\wvc54gc.exe
(if “D” is the letter of your CD-ROM drive).
Setup
. Click the
Setup
button to begin the installation process.
Install Viewer & Recorder Utility
. To install the Camera’s Multi-Camera Viewer & Recorder Utility on your
PC, click
this button.
Setup SoloLink DDNS Service
. Click the
Setup SoloLink DDNS Service
button to configure and use
Linksys’s Dynamic Domain Name System (DDNS) service.
User Guide
. Click this button to open the PDF file of this User Guide.
Exit
. Click the
Exit
button to exit the Setup Wizard.
2.
To install the Camera, click the
Setup
button on the
Welcome
screen.
3.
After reading the License Agreement, click
Next
if you agree and want to continue the installation, or click
Cancel
to end the installation.
Figure 5-2: End User License Agreement Screen
Figure 5-1: Setup Wizard - Welcome Screen
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 92
11
Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera
Setup Wizard
Compact Wireless-G Internet Video Camera
4.
Connect the included network cable to your network router or switch. Click the
Next
button.
5.
Connect the other end of the network cable to the Camera’s ETHERNET port. Click the
Next
button.
Figure 5-3: Connect the Network Cable to the Router or
Switch Screen
Figure 5-4: Connect the Network Cable to the Camera Screen
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 92
12
Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera
Setup Wizard
Compact Wireless-G Internet Video Camera
6.
Plug the included power adapter into the Camera’s Power port. Plug the other end into an electrical outlet.
Click the
Next
button.
7.
Make sure the LED is lit on the Camera’s front panel. If it is not lit, make sure the cables are properly
connected to the Camera. Click the
Next
button.
Figure 5-5: Power on the Camera Screen
Figure 5-6: Check the LED Screen
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top