Page 11 / 92 Scroll up to view Page 6 - 10
3
Chapter 1: Introduction
What’s in this Guide?
Compact Wireless-G Internet Video Camera
Appendix C: Upgrading Firmware
This appendix explains how you can upgrade the Camera’s firmware.
Appendix D: Windows Help
This appendix describes how you can use Windows Help for instructions about networking, such as installing
the TCP/IP protocol.
Appendix E: Glossary
This appendix gives a brief glossary of terms frequently used in networking.
Appendix F: Specifications
This appendix provides the technical specifications for the Camera.
Appendix G: Warranty Information
This appendix supplies the warranty information for the Camera.
Appendix H: Regulatory Information
This appendix supplies the regulatory information regarding the Camera.
Appendix I: Contact Information
This appendix provides contact information for a variety of Linksys resources, including Technical Support.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 92
4
Chapter 2: Planning Your Wireless Network
Introduction
Compact Wireless-G Internet Video Camera
Chapter 2: Planning Your Wireless Network
Introduction
A wireless local area network (WLAN) is exactly like a regular local area network (LAN), except that each
computer in the WLAN uses a wireless device to connect to the network. Computers and other devices, such as
peripherals, in a WLAN share the same frequency channel and SSID, which is an identification name for wireless
devices.
Ad-Hoc and Infrastructure Modes
Unlike wired networks, wireless networks have two different modes in which they may be set up: infrastructure
and ad-hoc.
An infrastructure configuration is a WLAN and wired LAN communicating to each other through an
access point. An ad-hoc configuration is wireless-equipped computers communicating directly with each other.
Choosing between these two modes depends on whether or not the wireless network needs to share data or
peripherals with a wired network or not.
If the computers on the wireless network need to be accessed by a wired network or need to share a peripheral,
such as a printer, with the wired network computers, the wireless network should be set up in infrastructure
mode. The basis of infrastructure mode centers around an access point, which serves as the main point of
communications in a wireless network. (A wireless router can also be used because a wireless router
incorporates the capabilities of an access point.) Access points transmit data to PCs equipped with wireless
network cards, which can roam within a certain radial range of the access point.
Multiple access points can be
arranged to work in succession to extend the roaming range, and can be set up to communicate with your
Ethernet (wired) hardware as well.
If the wireless network is relatively small and needs to share resources only with the other computers on the
wireless network, then the ad-hoc mode can be used. Ad-hoc mode allows computers equipped with wireless
transmitters and receivers to communicate directly with each other, eliminating the need for an access point.
The drawback of this mode is that, in Ad-Hoc mode, wireless-equipped computers are not able to communicate
with computers on a wired network. And, of course, communication between the wireless-equipped computers
is limited by the distance and interference directly between them.
Network Layout
The Compact Wireless-G Internet Video Camera is compatible with all 802.11b and 802.11g routers, as well as
access points. The Camera will also communicate with network adapters, such as the Wireless-B and Wireless-G
Infrastructure:
configuration in which
a wireless network is bridged to a
wired network via an access point.
LAN (Local Area Network):
the
computers and networking products
that make up the network in your home
or office.
Ad-hoc:
a group of wireless devices
communicating directly to each other
(peer-to-peer) without the use of an
access point.
WLAN (Wireless Local Area
Network)
: A group of computers and
associated devices that communicate
with each other wirelessly.
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 92
5
Chapter 2: Planning Your Wireless Network
Network Layout
Compact Wireless-G Internet Video Camera
Notebook Adapters for your laptop computers, Wireless-B and Wireless-G PCI Adapters for your desktop PCs, and
Wireless-B and Wireless-G USB Adapters for your computers when you want to enjoy USB connectivity.
With these, and many other Linksys products, your networking options are limitless. Go to the Linksys website at
www.linksys.com
for more information about products that work with the Compact Wireless-G Internet Video
Camera.
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 92
6
Chapter 3: Getting to Know the Compact Wireless-G Internet Video Camera
Camera LED
Compact Wireless-G Internet Video Camera
Chapter 3: Getting to Know the Compact Wireless-G Internet
Video Camera
Camera LED
The Camera has one LEDs to let you know how the Camera is functioning.
(power)
Blue. The LED lights up when the Camera is powered on. It flashes while the Camera is booting
up and is solidly lit when the Camera is ready for use.
Camera Head
The Camera head can be attached to its stand either on its bottom panel or its back panel. After the Camera has
been assembled, you can tilt the Camera head from its ball joint.
Camera Reset Button
The Camera features a Reset button on its bottom panel.
RESET
The
RESET
button is what you will press if you need to reset the Camera. Insert a paper clip
into the opening. Then press the button and hold it in for five seconds.
Figure 3-1: Camera LED
Figure 3-2: Camera Tilting Feature
LED
Figure 3-3: Reset Button
IMPORTANT:
Resetting the Camera will erase all of your settings, such as
encryption information, and replace them with the factory defaults. Do not reset
the Camera if you want to retain these settings.
Hole for
Attaching Stand
(Stand Option)
NOTE:
These are the factory default settings of the Camera.
default IP address:
192.168.1.115
user name:
admin
password:
admin
RESET
Button
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 92
7
Chapter 3: Getting to Know the Compact Wireless-G Internet Video Camera
Camera Ports
Compact Wireless-G Internet Video Camera
Camera Ports
The Camera features two ports on its back panel.
POWER
The
POWER
port is where you will connect the power adapter.
ETHERNET
The
ETHERNET
port is where you will connect the Ethernet network cable.
Camera Stand
The Camera can stand on a surface or be mounted on a wall. Depending on the positioning you want, you can
attach the Camera head to its stand at two different points.
If you want to stand the Camera on a surface, insert the screw end of the stand into the hole on the bottom panel.
Tighten the screw end and then the gray thumbscrew.
If you want to mount the Camera on a wall, insert the screw end of the stand into the hole on the back panel.
Tighten the screw end, and then tighten the gray thumbscrew. Refer to “Chapter 5: Setting Up and Mounting the
Compact Wireless-G Internet Video Camera” for further instructions about mounting the Camera on a wall.
Figure 3-4: Camera in Standing Position
Figure 3-5: Camera in Wall-Mounting Position
Thumbscrew
Hole for Attaching
Stand (Wall-Mount
Option)
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top