1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WVC200
    5. /
  5. 8
Page 36 / 80 Scroll up to view Page 31 - 35
WVC200-210 User Guide
32
Audio/Video
Configuring Software
Adjustments
•
Power Line Frequency
— Select the power line frequency (50Hz or 60Hz) used in your
region, to improve the picture quality under fluorescent lighting.
•
Color Balance
— Select the suitable white balance option as you desired.
•
Exposure
— If necessary, you can adjust the exposure to obtain a better image. You can
select a sharpness value between -3 and 3.
•
Sharpness
— Select the desired option for the sharpness. You can select a sharpness
value between -3 and 3.
Video Options
•
Flip Image
— Enable this feature if you want to rotate the image 180° on the vertical
axis.
•
Mirror Image
— Enable this feature if you want to rotate the image 180° on the
horizontal axis.
•
Enable Time Stamp
— If you want to display a time stamp on the video, enable this
feature by checking the check box.
•
Enable Text Display
— If you want to display text on the video, enable this feature by
checking the check box. The text can be up to 20 characters in length. This feature is
often used to identify the camera location when multiple cameras are installed.
Audio Options
Enable Audio
—Enable audio by checking the check box.
Audio Mode Settings
Function
Simplex — Talk Only
Enables the speaker jack
Simplex
— Listen Only
Enables the microphone jack
Half Duplex
— Talk or Listen
(Not simultaneously)
Enables the speaker and microphone jack
but only one can be used at a time
Full Duplex — Talk and Listen
(Can be simultaneously)
Enables the speaker and microphone jack
and both can be used simultaneously
Page 37 / 80
WVC200-210 User Guide
33
Maintenance
Configuring Software
Audio Type
— When the microphone is enabled, this drop down menu allows you to select the
audio compression type.
Description
Enable Speaker
— Check the box to activate an optional external speaker.
Maintenance
Clicking on the Maintenance tab shows options for
Restore Factory Defaults
,
Restart
,
Firmware Upgrade
, and
Configuration
.
Restore Factory Defaults
•
Restore Defaults
— This option restores the camera to the factory default settings.
Restart
•
Restart
— This option restarts the camera.
Compression Settings
Description
G.726
(WVC200 only)
Default audio compression algorithm, uses
32 Kbps of bandwidth with quality similar to
G.711 but using only half of the bandwidth
G.711 A-Law
(WVC210 only)
A standard compression algorithm that uses
64 Kbps of bandwidth and is primarily used
in Europe
G.711 u-Law
(WVC210 only)
A standard compression algorithm that uses
64 Kbps of bandwidth and is primarily used
in North America and Japan
Page 38 / 80
WVC200-210 User Guide
34
Users
Configuring Software
Firmware Upgrade
Upgrade Firmware
— This option is used to update the camera’s firmware. This is detailed in
Chapter 5.
Configuration
•
Save
— Use this option to save a configuration file containing all of the current camera
management settings.
•
Browse
— Use this option to locate a previously saved configuration file.
•
Upload
— Use this button to upload a previously saved configuration file into the
camera.
Users
Clicking on the Users tab shows options for
Authentication
,
Administrator
, and
User List
.
Authentication
— Check the box to enable authentication check.
Administrator
•
Admin
— The default administrator name cannot be changed but the password can
and should be changed for security purposes. To change the password, enter the
desired password in the
Password
and
Confirm Password
fields. Click the
Change
button
to apply the change.
User List
•
User ID
— The User ID cannot be modified.
Page 39 / 80
WVC200-210 User Guide
35
DDNS
Configuring Software
•
User Name
— Enter the desired user name.
•
Password
— Enter the desired password in this field.
•
Confirm Password
— Retype the password in this field.
•
Pan/Tilt
— Click to allow user control PAN and TILT function.
•
Setup
— Click to authorize user control as an administrator.
Click the
Add
button to add or modify a new User ID. Delete a User ID by selecting the User
ID fields and backspacing through the information.
DDNS
The
DDNS
tab contains only DDNS Settings.
•
Enable DDNS
— This option will enable Dynamic Domain Name Service (DDNS). When
used with a DDNS service provider, you can access your camera over the Internet using a
domain name instead of an IP address.
•
Service Provider
— Select the service provider that you have an account with. If you do
not have an account, you can select a service provider and click the Web Site button.
•
Host Name
— Enter the host name (Domain Name) allocated to you by the DDNS
Server provider.
•
Account
— Enter the login name for the DDNS account.
•
Password
— Enter the password for the DDNS account.
Page 40 / 80
WVC200-210 User Guide
36
Mail & FTP
Configuring Software
•
Check WAN IP Address
— This option allows you to set how often the device should
check to see if the Internet IP address has changed. If the IP address has changed, the
DDNS Server will be notified.
Mail & FTP
Clicking on the
Mail & FTP
Tab shows options for
E-mail Alert
and
FTP Alert
.
E-mail Alert
Primary SMTP Server
•
SMTP Mail Server
— Enter the address of the SMTP (Simple Mail Transport Protocol)
Server to be used to send e-mail.
•
Port
— Enter the port number for the mail server, the default is
25
.
•
Authentication
— Check the box if your mail server requires authentication and enter
the following options:
–
Account Name
— Enter the account name to be used on the email server.
–
Password
— Enter the password associated with the account name.
NOTE:
To complete the DDNS Service setup, port
forwarding needs to be configured on your router.
NOTE:
Only one SMTP server is used, even if both the
primary and secondary SMTP servers are enabled.

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top