19216811.live101
Appendix A: Troubleshooting
Common Problems and Solutions
Wireless-G Router for 3G/UMTS Broadband
Follow these steps to set DMZ hosting:
1.
Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router.
Go to the Applications & Gaming => Port Range Forward tab.
2.
Disable or remove the entries you have entered for forwarding.
Keep this information in case you
want to use it at a later time.
3.
Go to the Applications & Gaming => DMZ tab.
4.
Select
Enable
next to DMZ. In the
Client PC IP Address
field, enter the IP address of the computer you
want exposed to the Internet.
This will bypass the NAT technology for that computer. Please refer to
“Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting
an IP address.
5.
Once completed with the configuration, click the
Save Settings
button.
9.
I forgot my password, or the password prompt always appears when I am saving settings to the
Router.
Reset the Router to factory default by pressing the Reset button for 10 seconds and then releasing it. If you
are still getting prompted for a password when saving settings, then perform the following steps:
1.
Access the Router’s web-based utility by going to http://192.168.1.1 or the IP address of the Router.
Enter the default password admin, and click the Administration => Management tab.
2.
Enter a different password in the
Router Password
field, and enter the same password in the second
field to confirm the password.
3.
Click the
Save Settings
button.
10.I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop-up window.
If you have proxy settings, you need to disable these on your computer. Because the Router is the gateway for
the Internet connection, the computer does not need any proxy settings to gain access.
Please follow these
directions to verify that you do not have any proxy settings and that the browser you use is set to connect
directly to the LAN.
•
For Microsoft Internet Explorer 5.0 or higher:
1.
Click
Start,
Settings
, and
Control Panel
. Double-click Internet Options.
2.
Click the
Connections
tab.
3.
Click the
LAN settings
button and remove anything that is checked.
4.
Click the
OK
button to go back to the previous screen.
5.
Click the option
Never dial a connection
.
This will remove any dial-up pop-ups for PPPoE users.
•
For Netscape 4.7 or higher:
1.
Start
Netscape Navigator
, and click
Edit
,
Preferences
,
Advanced
, and
Proxies
.
2.
Make sure you have Direct connection to the Internet selected on this screen.
3.
Close all the windows to finish.
Downloaded from
www.Manualslib.com
manuals search engine