1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WRT54G3G
    5. /
  5. 20
Page 96 / 165 Scroll up to view Page 91 - 95
86
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Applications and Gaming Tab - SMS
Wireless-G Router for 3G/UMTS Broadband
The Applications and Gaming Tab - SMS
The Router allows SMS (Short Message Service) commands to phones. Click
New
to send a new message, then
click the
Send
button or to cancel the message, click the
Cancel
button. To reply to someone’s message, click
Reply
. You can reply with or without sending back the original message. Click the
Delete
button to delete a
message.
Figure 8-49: Applications and Gaming Tab - SMS
Figure 8-50: Applications and Gaming Tab - SMS
Message
NOTE:
The phone number format can be either format, a long format with complete country
code or a short code. Example: +44778712456 or 121.
Downloaded from
www.Manualslib.com
manuals search engine
Page 97 / 165
87
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Management
Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Management
This section of the Administration tab allows the network’s administrator to manage specific Router functions for
access and security.
Router Password
Local Router Access
Router Password and Re-enter to confirm
. You can change the Router’s password from here. Enter a new
Router password and then type it again in the
Re-enter to confirm
field to confirm.
Web Access
Access Server
. HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers
on the World Wide Web. HTTPS is a similar protocol, but it uses SSL (Secured Socket Layer) to encrypt
transmitted data, so security is increased. Select the protocol you want to use,
HTTP
or
HTTPS
.
Wireless Access Web
. If you are using the Router in a public domain where you are giving wireless access to
your guests, you can disable wireless access to the Router’s web-based utility. You will only be able to access the
web-based utility via a wired connection if you disable the setting. Select
Enable
to enable wireless access to the
Router’s web-based utility or
Disable
to disable wireless access to the Utility.
Remote Router Access
Remote Management and Management Port
. To access the Router remotely, from outside the network, verify
that
Enable
is selected. Then, enter the port number that will be open to outside access. You will need to enter
the Router’s password when accessing the Router this way, as usual.
Use https
. If you want to require the use of SSL (Secured Socket Layer) to encrypt transmitted data, click the
checkbox.
UPnP
UPnP
. When using UPnP features, select
Enable
. Because allowing this may present a risk to security, this
feature is disabled by default.
Change these settings as described here, and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 8-51: Administration Tab - Management
Downloaded from
www.Manualslib.com
manuals search engine
Page 98 / 165
88
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Management
Wireless-G Router for 3G/UMTS Broadband
Mobile
The Router allows SMS (Short Message Service) commands through your mobile phone. This feature allows you
to select authorized users who can then command the Router to reboot, connect to a mobile network, or send a
WOL packet to a device or all devices on the network.
SMS Deletion
The SMS will be stored in the SIM. The SIM card will not receive incoming messages when the SIM card capacity
has been exceeded. The user can delete SMS messages manually or automatically. The default is
Manually
. If
you want the Router to delete the oldest messages first so that the number of saved SIM messages will be
limited, select
Automatically
.
Limit Number of SMS
. If you selected Automatically, then you can change the number of saved SIM
messages. The default is
8
.
Accept SMS
SMS-INT timer
. Enter in the field the length of time in seconds that you want between commands.
Select
Trusted Number RC4 Encryption
to allow RC4 encryption for the command and to only authorize
users with the selected phone numbers below to use this feature.
Select
Trusted Number
to only authorize users with the selected phone numbers below to use this feature.
Select
Anonymous
to authorize everyone to use this feature.
Select
None
to authorize no one to use this feature.
Phone1-5
. Enter the phone numbers of those you are authorizing.
Reboot by SMS
. Select
Enable
to allow a reboot.
WOL by SMS
(Wake-on-LAN). Select this feature to wake up the equipment on your network.
PC1-5 MAC
. This feature is available when WOL by SMA is enabled. Enter the MAC addresses of the devices and/
or PCs on your network.
Downloaded from
www.Manualslib.com
manuals search engine
Page 99 / 165
89
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Log
Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Log
The Router can keep logs of all traffic for your Internet connection.
Log
Log
. To disable the Log function, keep the default setting,
Disable
. To monitor traffic between the network and
the Internet, select
Enable
. When you wish to view the logs, click
Incoming Log
or
Outgoing Log
, depending on
which you wish to view.
Change these settings as described here, and click the
Save Settings
button to apply your changes or
Cancel
Changes
to cancel your changes.
Figure 8-52: Administration Tab - Log
Downloaded from
www.Manualslib.com
manuals search engine
Page 100 / 165
90
Chapter 8: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Diagnostics
Wireless-G Router for 3G/UMTS Broadband
The Administration Tab - Diagnostics
The Diagnostics screen lets you reboot the Router and run diagnostic tests, which allow you to check the
connections of your network components.
Reboot
Reboot
. To reboot the Router, click the
Reboot
button.
Ping Test
Ping Parameters
. The Ping test will check the status of a connection. Click the
Ping
button to open the
Ping Test
screen. Enter the address of the PC whose connection you wish to test and how many times you wish to test it.
Then, click the
Ping
button. The
Ping Test
screen will then display the test results. To stop the test, click the
Stop
button. Click the
Clear Log
button to clear the screen. Click the
Close
button to return to the
Diagnostics
screen.
Traceroute Test
Traceroute Parameters
. To test the performance of a connection, click the
Traceroute
button. Enter the address
of the PC whose connection you wish to test and click the
Traceroute
button. The
Traceroute
screen will then
display the test results. To stop the test, click the
Stop
button. Click the
Clear Log
button to clear the screen.
Click the
Close
button to return to the
Diagnostics
screen.
Figure 8-53: Administration Tab - Diagnostics
Figure 8-54: Ping Test
Figure 8-55: Traceroute Test
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top