1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WPSM54Gv1017
    5. /
  5. 4
Page 16 / 132 Scroll up to view Page 11 - 15
English : Driver Installation
WPSM54G
14
Wireless-G PrintServer
I.
The network printer driver is
installed and configured for use
with the PrintServer. Please wait.
This may take a few minutes.
Installing the Network Printer Driver
Installing the Network Printer Driver,
Continued
Verifying the Network Printer Driver
Installation
Verifying the Network Printer Driver
Installation, Continued
Page 17 / 132
English : Driver Installation
WPSM54G
15
Wireless-G PrintServer
J.
The installation of the
PrintServer is complete. To print
a test page, click
Test Print
.
K.
The Setup Wizard sends a test
page to the printer. Click the
OK
button.
L.
After the test page is printed,
click
Finis°
.
If you clicked the Finish button
before the test page is printed,
a new window appears. Click
OK
to continue printing the test
page, or click
Cancel
to cancel
the test page.
M.
When you are prompted to
restart your computer, click
OK
.
Your computer is now ready to use the PrintServer and printer.
Print a Test Page
Test Page Being Printed
Click the Finish Button
Test Page Interrupted
Restart Your Computer
Page 18 / 132
English : Driver Installation
WPSM54G
16
Wireless-G PrintServer
To install the PrintServer on the other computers in your network, proceed
to step A. You must follow steps A-C for each computer.
CAUTION:
Make sure you have set up your printer and installed
your printer’s driver on each computer before you install the
PrintServer. (To install the printer, use the CD that came with your
printer.) For successful installation of the printer, make sure you
connect the printer’s USB cable directly to your computer’s
USB port.
A.
Insert the Setup CD-ROM into
the computer’s CD-ROM drive.
The Setup Wizard should run
automatically.
B.
Click
Click Here to Start
.
C.
Click
Set up Computer
.
Congratulations! T°e installation of t°e Wireless-G PrintServer
is complete.
Proceed to t°e next section, “3: How to Use t°e PrintServer”.
Insert the Setup CD-ROM
Welcome Screen
Set Up Computer
Page 19 / 132
English : How to Use the PrintServer
WPSM54G
17
Wireless-G PrintServer
How to Use t°e PrintServer
3
This section explains how to use the PrintSever through its utility.
Printing
Any time you start a print job, your computer will automatically connect to
the printer. You do not need to perform any additional steps.
Scanning, Faxing, or Reading Information from a Memory Card
To scan, fax, or read information from a memory card using the software
that came with your multifunction printer (if you have one), use the
PrintServer Utility to connect the computer to the printer.
NOTE:
Each time you scan, fax, or read information from a
memory card, you must follow these instructions.
Follow these instructions:
A.
Right-click the PrintServer
icon in the system tray of your
desktop.
B.
A menu will appear. Click
Connect
.
C.
When the icon with waves is
displayed, the computer is
connected to the printer.
You can now scan, fax, or read
information from a memory
card inserted into the printer.
Icon Showing Availability Status
Click Connect
Icon Showing Connected Status
Page 20 / 132
English : How to Use the PrintServer
WPSM54G
18
Wireless-G PrintServer
D.
When you are finished with your
scan, fax, or memory card, right-
click the PrintServer icon and
click
Disconnect
.
By default, the computer will be
disconnected one minute after
the scan or fax is completed.
PrintServer Icon and Its Functions
The following section discusses the PrintServer icon in further detail.
The PrintServer icon is located in the system tray of your desktop.
The icon
can show three status options:
Icon S°owing Availability
Status
The green icon indicates
that the printer is available for use.
Icon S°owing Connected Status
The green icon with waves indicates
that the computer is connected to
the printer and ready for use.
Icon S°owing Offline Status
The
red icon indicates that printer is
not available. Refer to “Appendix
A: Troubleshooting” of the User
Guide on the Setup CD-ROM for
instructions.
Click Disconnect
Icon Showing Availability Status
Icon Showing Connected Status
Icon Showing Offline Status

Rate

4.5 / 5 based on 2 votes.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top