Page 6 / 132
Scroll up to view Page 1 - 5
English : Print Server Installation
WPSM54G
4
Wireless-G PrintServer
F.
Connect the Ethernet network
cable to your router and the
Ethernet port of the PrintServer.
(The Ethernet connection is for
configuration purposes only.
Later you can disconnect the
Ethernet network cable when
the PrintServer has connected
wirelessly.)
Click
Next
.
G.
Connect the power adapter to
the PrintServer and an electrical
outlet.
Click
Next
.
H.
Reconnect the printer’s power
adapter to the electrical outlet.
Click
Next
.
I.
Wait a few moments while
the system searches for the
PrintServer.
Connect the Ethernet Network Cable to the
Router and PrintServer
Connect the Power Adapter to the
PrintServer and Electrical Outlet
Reconnect the Power to the Printer
Searching for the PrintServer
Page 7 / 132
English : Print Server Installation
WPSM54G
5
Wireless-G PrintServer
J.
Select the appropriate
PrintServer. If you cannot find
the PrintServer, click
Refres°
List
.
Click
Next
.
NOTE:
If the PrintServer
is already configured,
you will be prompted for
its password. Enter the
password, and click
Enter
.
K.
If your network uses a router
that automatically assigns IP
addresses, select
Automatically
obtain an IP address (DHCP)
.
Click
Next
.
If your network uses a static
IP address, select
Set IP
configuration manually
, and
enter the IP Address, Subnet
Mask, and Gateway in the fields
provided.
Click
Next
.
Select the PrintServer
Network Settings - Automatically Obtain
an IP Address (DHCP)
Network Settings - Set IP Configuration
Manually
Page 8 / 132
English : Print Server Installation
WPSM54G
6
Wireless-G PrintServer
L.
Create a password and enter
it in the
Password
and
Confirm
fields.
Click
Next
.
M.
Select the wireless network
that the PrintServer should join.
If you do not see the wireless
network you want to use, click
Refres°
and locate the network.
Click
Next
and go to step O.
If you want to manually enter
the settings for the wireless
network, click
Manual Setup
.
Click
Next
and go to step N.
N.
If you clicked Manual Setup,
the
Configure Wireless Settings
screen appears. Enter the name
of the wireless network.
Click
Next
.
Set the PrintServer’s Password
Select the Wireless Network
Enter the Name of the Wireless Network
Page 9 / 132
English : Print Server Installation
WPSM54G
7
Wireless-G PrintServer
O.
The wireless security method
of your network should be
automatically selected. Proceed
to the instructions for your
wireless security method.
If wireless security is disabled,
keep the default,
Disabled
, and
click
Next
.
WPA-Personal (TKIP)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click
Next
.
WPA-Personal (AES)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click
Next
.
Wireless Security - Disabled
Wireless Security - WPA-Personal (TKIP)
Wireless Security - WPA-Personal (AES)
Page 10 / 132
English : Print Server Installation
WPSM54G
8
Wireless-G PrintServer
WPA2-Personal (TKIP)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click
Next
.
WPA2-Personal (AES)
Enter a Passphrase (also known
as a Pre-Shared Key) that is
8-63 characters in length.
Click
Next
.
WEP (128-Bit) or WEP (64-Bit)
Enter a Passphrase that is no
more than 16 characters in
length. Click
Next
.
If you want to manually
enter the WEP key, leave the
Passphrase
field blank and click
Next
.
Wireless Security - WPA2-Personal (TKIP)
Wireless Security - WPA2-Personal (AES)
Wireless Security - WEP (128-Bit)
19216811.live