Page 141 / 164
Scroll up to view Page 136 - 140
Logging out of the Residential Gateway
3425-00669 Rev E
121
Logging out of the Residential Gateway
The Logout screen allows you to properly exit the web-based utility.
Path:
Administration > Logout
Click
Logout
to exit the web-based utility.
Page 143 / 164
3425-00669 Rev E
123
Introduction
The Status screens provide a system summary of the software used by
the residential gateway and indicates the current status of the DSL
connection. You can use these screens to find hardware and software
information as well as physical and IP layer information.
11
Chapter
Status
In This Chapter
Internet
.................................................................................................
124
Local Network
.....................................................................................
126
Wireless
................................................................................................
128
DSL Connection
..................................................................................
129
Bridges
..................................................................................................
131
ARP Table
............................................................................................
132
Page 144 / 164
Chapter 11
Status
124
3425-00669 Rev E
Internet
The Internet screen displays information about the Gateway and its current settings.
Path:
Status > Internet
Gateway Information
Manufacturer OUI
—
The manufacturer ID number is displayed.
Serial Number
—
The serial number of the Gateway is displayed.
Hardware Version
—The version number of the Gateway’s hardware is displayed.
Software Version
—The version number of the Gateway’s software is displayed.
Region
—
The acronym for the time zone where the Gateway is geographically
located.
System Uptime
—
The length of time the Gateway has been active is displayed.
Local Time
—
The date and time of the Gateway are displayed.
Page 145 / 164
Internet
3425-00669 Rev E
125
Internet Connection
This section shows the current information for enabled connections. The table lists
the following information about each connection: Interface, MAC/IP/Subnet,
Gateway, DNS, and Status.
For DHCP connections, you can manually renew or release them. For PPP-type
connections, you can manually connect or disconnect them.
Click
Refresh
to update the on-screen information.