Page 136 / 164
Scroll up to view Page 131 - 135
Chapter 10
Administration
116
3425-00669 Rev E
ATM F5 Loopback
Path:
Administration > ATM F5 Loopback
PVC Connection
—
Select the PVC connection you want to configure.
Number of Pings
—
Enter how many times you want to ping. The default is 3.
Ping Timeout
—
Enter the number of milliseconds before the ping test will time out.
The default is 5000 milliseconds.
Ping Result
—
The results of the ping test are displayed.
To run the test, click Start Test. Click Refresh to update the on-screen information.
Page 137 / 164
Backup
3425-00669 Rev E
117
Backup
The Backup screen allows you to back up or restore the residential gateway’s
settings using a configuration file.
Path:
Administration > Backup
Backup Configuration
Backup
—To save the Gateway’s settings in a configuration file, click this button and
follow the on-screen instructions.
Note:
The voice settings will not be saved in the configuration file.
Restore Configuration
To use this option, you must have previously backed up its configuration settings.
Please select a file to restore
—
Click
Browse
and select the residential gateway’s
configuration file.
Restore
—To restore the residential gateway’s configuration settings, click this
button and follow the on-screen instructions.
Page 138 / 164
Chapter 10
Administration
118
3425-00669 Rev E
Factory Defaults
The Factory Defaults screen allows you to restore the residential gateway’s
configuration to its factory default settings. (An alternative method is to press and
hold the Reset button on the residential gateway
’s back panel for approximately ten
seconds.)
Path:
Administration > Factory Defaults
Note:
Restoring factory defaults deletes custom settings. Note your custom settings
before clicking the Restore Factory Defaults button.
Restore Factory Defaults
—
To reset settings to the default values, click this button
and follow the on-screen instructions. Any custom Gateway settings you have saved
will be lost when the default settings are restored.
Page 139 / 164
Firmware Upgrade
3425-00669 Rev E
119
Firmware Upgrade
The Upgrade screen allows you to upgrade the resi
dential gateway’s firmware. Do
not upgrade the firmware unless you are experiencing problems with the residential
gateway or the new firmware has a feature you want to use.
Note:
The residential gateway may lose the settings you have customized. Before
you upgrade its firmware, write down all of your custom settings. After you
upgrade its firmware, you will have to re-enter all of your configuration settings.
Path:
Administration > Upgrade
Please Select a File to Upgrade
—
Click
Browse
and select the extracted firmware
upgrade file.
Start to Upgrade
—
After you have selected the appropriate file, click this button, and
follow the on-screen instructions.
Note:
In rare cases (such as a power failure), the firmware upgrade may fail. If that
happens, the residential gateway will enter recovery mode and automatically
download firmware from your service provider’s provisioning server.
Page 140 / 164
Chapter 10
Administration
120
3425-00669 Rev E
Reboot
The Reboot screen allows you to gracefully stop and restart the residential gateway.
Performing a reboot allows you to save any configuration changes and to reboot the
router to make the changes take effect.
Path:
Administration > Reboot
Click
Reboot Box
to reboot the residential gateway. The restart will terminate the
Internet connection.
19216811.live