1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. WAG310G
    5. /
  5. 20
Page 96 / 164 Scroll up to view Page 91 - 95
Chapter 5
Voice
76
3425-00669 Rev E
Call Forward Settings
Path:
Voice > User1 or User2
Complete the following steps to configure your Call Forward Settings.
1
Enter the call forwarding numbers you want to use per the guidelines below:
Cfwd All Dest
—
Enter the number for the Call Forward All Service feature
(when you want to forward all calls).
Cfwd Busy Dest
—
Enter the number for the Call Forward Busy feature
(when the line is busy).
Cfwd No Ans Dest
—
Enter the number for the Call Forward No Answer
feature (when the line is not answered).
2
In the
Cfwd No Ans Delay
, enter the number of seconds to wait before the Call
Forward No Answer feature is triggered. The default is 20.
3
Click the
Save Settings
button to apply your changes or
Cancel Changes
button
to cancel.
Selective Call Forward Settings
Path:
Voice > User1 or User2
Complete the following steps to configure your Selective Call Forward Settings.
1
Enter the caller number
pattern to trigger the Call Forward Selective (1-8)
feature in the
Cfwd Sel1 Caller
field.
Page 97 / 164
User1 or User2
3425-00669 Rev E
77
2
Enter the destination number in the
Cfwd Sel1 Dest
field.
3
Enter additional caller and destination number pairs as desired.
4
In the
Cfwd Last Caller
field, enter the caller number that is actively forwarded
to the Cfwd Last Dest number when the Call Forward Last activation code is
used.
5
In the
Cfwd Last Dest
, enter the forward number for the Cfwd Last Caller
feature.
6
In the
Block Last Caller
, enter the ID of the caller blocked via the Block Last
Caller service.
7
In the
Accept Last Caller
, enter the ID of the caller accepted via the Accept Last
Caller service.
8
Click the
Save Settings
button to apply your changes or
Cancel Changes
button
to cancel.
Speed Dial Settings
Path:
Voice > User1 or User2
Complete the following steps to configure your Speed Dial Settings.
1
Enter the phone number for each Speed Dial setting in the field (
Speed Dial 2-9
)
that corresponds to the key want to use for that number.
2
Click the
Save Settings
button to apply your changes or
Cancel Changes
button
to cancel.
Supplementary Service Settings
Path:
Voice > User1 or User2
Complete the following steps to configure your Supplementary Service Settings.
Page 98 / 164
Chapter 5
Voice
78
3425-00669 Rev E
1
From the
CW Setting
drop-down menu, select yes or no to indicate if you want
to use the Call Waiting feature for all calls. The default is yes.
2
From the
Block CID Setting
drop-down menu, select yes or no to indicate if you
want to block Caller ID for all calls. The default is no.
3
From the
Block ANC Setting
drop-down menu, select yes or no to indicate if
you want to block anonymous calls. The default is no.
4
From the
DND Setting
drop-down menu, select yes or no to indicate if you want
to use the Do Not Disturb (DND) feature. The default is no.
5
From the
CID Setting
drop-down menu, select yes or no to indicate if you want
to enable Caller ID generation. The default is yes.
6
From the
CWCID Setting
drop-down menu, select yes or no to indicate if you
want to enable Caller ID for Call Waiting. The default is yes.
7
From the
Dist Ring Setting
drop-down menu, select yes or no to indicate if you
want to use the Distinctive Ring feature. The default is yes.
8
From the
Message Waiting
drop-down menu, select yes or no to indicate if you
want to use the Message Waiting feature. The default is no.
9
Click the
Save Settings
button to apply your changes or
Cancel Changes
button
to cancel.
Distinctive Ring Settings
Path:
Voice > User1 or User2
Complete the following steps to configure your Distinctive Ring Settings.
1
Enter the caller number pattern for each Dial setting in the field (
Ring1-8 Caller
)
to play Distinctive Ring/Call Waiting Tone.
2
Click the
Save Settings
button to apply your changes or
Cancel Changes
button
to cancel.
Page 99 / 164
User1 or User2
3425-00669 Rev E
79
Ring Settings
Path:
Voice > User1 or User2
Complete the following steps to configure your Ring Settings.
1
From the
Default Ring
drop-down menu, select the default ringing pattern for
all callers. The default is 1.
2
From the
Default CWT
drop-down menu, select the default CWT pattern for all
callers. The default is 1.
3
From the
Hold Reminder Ring
drop-down menu, select the ring pattern that
will remind you of a call on hold when the phone is on-hook. The default is 8.
4
From the
Call Back Ring
drop-down menu, select the ring pattern for call back
notification. The default is 7.
5
Click the
Save Settings
button to apply your changes or
Cancel Changes
button
to cancel.
Page 100 / 164

Rate

4 / 5 based on 1 vote.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top