Page 91 / 164 Scroll up to view Page 86 - 90
Info
3425-00669 Rev E
71
Call 1/2 Decode Latency
The number of milliseconds for decoder latency is
displayed.
Call 1/2 Jitter
The number of milliseconds for receiver jitter is displayed.
Call 1/2 Round Trip Delay
The number of milliseconds for delay is displayed.
Call 1/2 Packets Lost
The number of packets lost is displayed.
Call 1/2 Packet Error
The number of invalid packets received is displayed.
Call 1/2 Mapped RTP Port
The number of the NAT mapped RTP port is displayed.
PSTN Line Status
Path:
Voice > Info
PSTN Hook State
The statu
s of the PSTN phone line’s readiness is displayed.
“On” indicates that it is ready for use, while “Off” indicates that it is in use.
PSTN Line Voltage
The tip-to-ring voltage of the Line (FXO) port is displayed.
PSTN Loop Current
The loop current to the Line (FXO) port is displayed.
Page 92 / 164
Chapter 5
Voice
72
3425-00669 Rev E
System
The System screen displays system settings. (The User View only accesses the User
Password setting.)
Path:
Voice > System
System Configuration
Path:
Voice > System
The System screen displays system settings.
Page 93 / 164
System
3425-00669 Rev E
73
Note
: The User View only accesses the User Password setting.
Complete the following steps to setup a password for user access to the Voice
screens.
1
Enter the password in the
User Password
field. By default, there is no password.
2
Click the
Save Settings
button to apply your changes or
Cancel Changes
button
to cancel.
Page 94 / 164
Chapter 5
Voice
74
3425-00669 Rev E
User1 or User2
The User1 and 2 screens display similar settings. The User1 screen displays settings
for users of phone line 1, and the User2 screen displays settings for users of phone
line 2. (The User and Admin Views are the same for this screen.)
Page 95 / 164
User1 or User2
3425-00669 Rev E
75
Path:
Voice > User1 or User2

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top