Chapter 5
Voice
66
3425-00669 Rev E
About Voice
There are two views available, User and Admin. The default view is User. To display
the Admin View, click
Admin View
. If you are prompted for the admin login, enter
your admin name and password. To return to the User View, click
User View
.
Admin View
If the Gateway was provided by your service provider, then it may restrict access to
the Admin View of the Voice screens in the web-based utility. Contact your service
provider for the admin login.
User View
VoIP configuration parameters are primarily managed by your service provider;
therefore, most of the screens in the User View mode do not provide input fields for
configuring VoIP options.
Use the table below as a quick reference for Voice configuration tabs that have
configurable parameters in the User View.
Screen
Description
Info
The Voice> Info screen does not have input fields. This screen
provides information regarding VoIP activity. Refer to the
Info
(on
page 67) section for descriptions of the data fields displayed.
System
The Voice > System tab has an input field for setting up a User
Password. Refer to the
System
(on page 72) section for instructions
on managing this parameter.
Provisioning
Managed by your service provider.
Regional
Managed by your service provider.
SIP
Managed by your service provider.
Line1 / Line2
Managed by your service provider.
PSTN
Managed by your service provider.
User1 / User2
The Voice > User1 and Voice > User2 tabs have input fields in the
User View mode for setting up features such as Call Forwarding.
Refer to the
User1 or User2
(on page 74) section for instructions on
managing these parameters.