Page 31 / 186
Scroll up to view Page 26 - 30
2-3
Linksys ATA
Administrator Guide
Document Version 3.1
Chapter 2
Getting Started
Linksys Analog Telephone Adapters (ATAs)
PAP2T
The PAP2T provides two FXS ports (see
Figure 1-5
).
Table 1-5
AG310 Front Panel
LED
Function
Power
Steady green indicates power on and Internet connection. Flashing indicates
not connected to the Internet, booting or firmware upgrade.
Ethernet 1-4
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Voice Status
Steady green indicates that a voice call is currently in progress.
Phone
Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Line
Steady green when a telephone or fax machine has an active connection to
traditional phone service through the Line port.
DSL
Steady green indicates that the DSL connection is active.
Internet
Steady green indicates active connection. Flashing indicates traffic.
Table 1-6
AG310 Back Panel
Port
Function
DSL
Connect to the telephone wall jack providing DSL service using a RJ-11
cable.
Line
Connect to a standard telephone wall jack with an RJ-11cable.
Phone
Connect to an analog telephone or fax machine with an RJ-11 cable.
Ethernet 1-4
Connect to network devices, such as a PC or a switch, using an Ethernet
cable.
Power
Connect to the power supply.
Page 32 / 186
2-4
Linksys ATA
Administrator Guide
Document Version 3.1
Chapter 2
Getting Started
Linksys Analog Telephone Adapters (ATAs)
Figure 1-5
PAP2T
The following tables describe the LEDS on the front panel and the ports on the back panel of the device.
RTP300
The RTP300 provides an ATA with two FXS ports along with an IP router (see
Figure 1-6
). The RTP300
provides connectivity to an analog telephone as well as Internet connectivity to a LAN with a built-in
four-port switch. The IP router provides QoS support, an integrated firewall and VPN pass-through, and
full routing with DHCP and NAT.
Table 1-7
PAP2T Front Panel
LED
Function
Phone 1/2
Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Ethernet
Steady green indicates active connection. Flashing indicates traffic.
Power
Steady green indicates power on and Internet connection. Flashing indicates
not connected to the Internet, booting or firmware upgrade.
Table 1-8
PAP2T Back Panel
Port
Function
Phone 1/2
Connect to an analog telephone or fax machine with an RJ-11 cable.
Ethernet
Connect to a router or broadband (cable/DSL) modem.
Power
Connect to the 5-volt DC power adapter.
Page 33 / 186
2-5
Linksys ATA
Administrator Guide
Document Version 3.1
Chapter 2
Getting Started
Linksys Analog Telephone Adapters (ATAs)
Figure 1-6
RTP300
The following tables describe the LEDS on the front panel and the ports on the back panel of the device.
SPA1001
The SPA1001 provides one FXS port (see
Figure 1-7
).
Table 1-9
RTP300 Front Panel
LED
Function
Ethernet 1-4
Steady green indicates an active connection to the network. Flashing
indicates traffic.
Phone 1/2
Steady green when telephone or fax machine has an active or registered
connection to the ITSP through the Phone port. Flashing indicates phone is
in use or off hook.
Internet
Steady green indicates active connection. Flashing indicates traffic.
Table 1-10
RTP300 Back Panel
Port
Function
Internet
Connect to the broadband (cable/DSL) modem using an Ethernet cable.
Phone 1/2
Connect to an analog telephone or fax machine using an RJ-11 cable.
Ethernet 1-4
Connect to local IP devices, such as PCs, using an Ethernet cable.
Power
Connect to a 12v DC power supply.
Page 34 / 186
2-6
Linksys ATA
Administrator Guide
Document Version 3.1
Chapter 2
Getting Started
Linksys Analog Telephone Adapters (ATAs)
Figure 1-7
SPA1001
The following table describes the LEDS and ports on the back panel of the device.
SPA2102
The SPA2102 provides two FXS ports and an Ethernet port for connecting to a local PC or other Ethernet
device.
Table 1-11
SPA1001 Back Panel
LED/Port
Function
Phone
Connect to an analog telephone or fax machine with an RJ-11 cable.
Power
Connect to the 5-volt DC power adapter.
Act
Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Steady yellow indicates active Ethernet connection. Flashing indicates
traffic.
Ethernet
Connect to a router or broadband (cable/DSL) modem.
Page 35 / 186
2-7
Linksys ATA
Administrator Guide
Document Version 3.1
Chapter 2
Getting Started
Linksys Analog Telephone Adapters (ATAs)
Figure 1-8
SPA2102
The following tables describe the LEDS on the front panel and the ports on the back panel of the device.
SPA3102
The SPA3102 acts as a PSTN gateway providing connectivity to the PSTN.
Table 1-12
SPA2102 Front Panel
LED
Function
Power
Steady green indicates power on and Internet connection. Flashing indicates
not connected to the Internet, booting or firmware upgrade.
Internet
Steady green indicates active connection. Flashing indicates traffic.
Phone 1/2
Steady green indicates active or registered connection to the ITSP through
the Phone port. Flashing indicates device is in use or off hook.
Table 1-13
SPA2102 Back Panel
Port
Function
Phone 1/2
Connect to an analog telephone or fax machine with an RJ-11 cable.
Ethernet
Connect to a network device, such as a PC or a switch with an Ethernet
cable.
Internet
Connect to a router or broadband (cable/DSL) modem.
Power
Connect to the 5 volt DC power adapter.
19216811.live