1. Home
    2. /
  2. Manuals
    3. /
  3. Linksys
    4. /
  4. BEFSR81v2
    5. /
  5. 3
Page 11 / 53 Scroll up to view Page 6 - 10
EtherFast
®
Cable/DSL Router with QoS and 8-Port Switch
The following instructions assume you are running Windows XP with the
default interface. If you are using the Classic interface (where the icons and
menus look like previous Windows versions), please follow the instructions for
Windows 2000.
1. Click the
Start
button and open the
Control Panel
. From there, click the
Network and Internet Connections
icon. Then click the
Network
Connections
icon.
2. Select the
Local Area Connection
icon for the applicable Ethernet adapter
(usually it is the first Local Area Connection listed). Double-click the
Local Area Connection
. One the screen that appears, shown in Figure 4-
6, click the
Properties
button.
16
Instant Broadband
®
Series
3. Make sure the box next to
Internet Protocol (TCP/IP)
is
checked.
Highlight
Internet
Protocol
(TCP/IP)
, as shown in
Figure 4-4, and click the
Properties
button.
4. Select
Obtain an IP
address automatically
in both places, as shown
in Figure 4-5, and click
the
OK
button. Click the
OK
button again to com-
plete the PC configura-
tion.
5. Restart your computer.
Go to “Chapter 5: Configure the Router.”
15
Configuring Windows XP PCs
Figure 4-6
Figure 4-4
Figure 4-5
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 53
EtherFast
®
Cable/DSL Router with QoS and 8-Port Switch
18
Instant Broadband
®
Series
3. Make sure the box next to
Internet Protocol (TCP/IP) is
checked. Highlight
Internet
Protocol (TCP/IP)
, as shown
in Figure 4-7, and click the
Properties
button.
4. Select
Obtain an IP
address automatically
in
both places, as shown in
Figure 4-8, and click the
OK
button. Click the
OK
button
again
(or
the
Close
button if any set-
tings were changed) to
complete the PC configu-
ration.
5. Restart your computer.
Go to “Chapter 5: Configure the Router.”
17
Chapter 5: Configure the Router
This chapter will show you how to configure the Router to function in your net-
work and gain access to the Internet through your Internet Service Provider
(ISP). Detailed description of the Router’s Web-based Utility can be found in
“Chapter 6: The Router’s Web-based Utility.” Your ISP may require the use of
a Host Name and Domain Name. Further, you will set the WAN Connection
Type on the Router’s Setup tab based on the information provided by your ISP.
You will need setup information for your Internet connection from your ISP. If
you do not have this information, please contact your ISP before proceeding.
The instructions from your ISP tell you how to set up your PC for Internet
access.
Because you are now using the Router to share Internet access among
several computers, you will use the setup information to configure the Router
instead of your PC. You only need to configure the Router once using the first
computer you set up.
1.
Open your web browser. (It is all right if you get an error message at this
point. Continue following these directions.) Enter
in the
web
browser’s
Address field, as
shown in Figure 5-
1, and press the
Enter
key.
2.
An Enter Network Password window, shown in Figure 5-2, will appear.
Windows XP users will see a Connect to 192.168.1.1 window, shown in
Figure 5-3. Leave the User Name field empty, and enter
admin
in lower-
case letters in the Password field
(
admin
is the default password).
Then, click the
OK
button.
Figure 5-1
Figure 5-2
Figure 5-3
Figure 4-7
Figure 4-8
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 53
EtherFast
®
Cable/DSL Router with QoS and 8-Port Switch
Obtain an IP automatically
If
you
are
connecting
through DHCP or a dynam-
ic IP address from your ISP,
perform these steps:
A. Select
Obtain an IP
automatically
, shown in
Figure 5-4, as the WAN
Connection Type.
B.
Click the
Apply
butto to
save the setting, or click
the
Cancel
button to clear the setting and start over. When you are finished,
proceed to step 5.
Static IP
If you are connecting
through a static or fixed IP
address from your ISP,
perform these steps:
A. Select
Static
IP
,
shown in Figure 5-5,
as
the
WAN
Connection Type.
B.
Enter the
IP Address
.
C. Enter
the
Subnet
Mask
.
D.
Enter the
Gateway Address
.
E.
Enter the
DNS
in the 1, 2, and/or 3 fields. You need to enter at least one
DNS address.
F.
Click the
Apply
button to save the settings, or click the
Cancel
button to
clear the settings and start over. When you are finished, proceed to step 5.
20
Instant Broadband
®
Series
19
Figure 5-4
Figure 5-5
3.
The Router configuration screen will appear with the Setup tab selected.
Based on the setup instructions from your ISP, you may need to provide the
Host Name
and
Domain Name.
These fields allow you to provide a host
name and domain name for the Router and are usually left blank. If request-
ed by your ISP (usually cable ISPs), complete these two fields.
The values for the Router’s LAN IP Address and Subnet Mask are shown
on the Setup screen. The default values are 192.168.1.1 for the IP Address
and 255.255.255.0 for the Subnet Mask.
4.
The Router supports six connection types: Obtain an IP automatically (for
DHCP connections), Static IP, PPPoE, RAS, PPTP, and Heart Beat Signal.
These types are listed in the drop-down menu for the
WAN Connection
Type
setting. Each Setup screen and available features will differ depend-
ing on what kind of connection type you select. Proceed to the instructions
for the connection type you are using. When you are finished with the Setup
tab, proceed to step 5.
IMPORTANT:
If you have previously enabled any
Internet-sharing
proxy server software
on any of your PCs, you must disable it now.
Some examples of Internet-sharing software are Internet LanBridge,
Wingate, ICS, and Sygate.
To disable your Internet-sharing software:
• If you are running Netscape Navigator, click
Edit
,
Preferences
,
Advanced
, and
Proxies
. Click
Direct Connection to the Internet
.
• If you are running Internet Explorer 5.x or higher, click
Start
,
Settings
,
Control Panel
,
Internet Options
,
Connections
, and
LAN Settings
. Remove checkmarks from all three boxes. Click the
OK
button to continue.
Also, you must disable any
Internet log-on software
(such as Ivasion
Winpoet or Enternet 300) and any
firewall software
(such as
ZoneAlarm and Watchdog) on all of your PCs.
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 53
EtherFast
®
Cable/DSL Router with QoS and 8-Port Switch
22
Instant Broadband
®
Series
21
PPTP
PPTP is a service used in
Europe only. If you are
using a PPTP connection,
check with your ISP for
the necessary setup infor-
mation.
When you are finished
with the Setup tab, shown
in Figure 5-8, proceed to
step 5.
Heart Beat Signal
Heart Beat Signal is a
service used in Australia
only. (Shown in Figure 5-
9.) If you are using a
Heart Beat Signal con-
nection, check with your
ISP for the necessary
setup information.
When you are finished
with the Setup tab, pro-
ceed to step 5.
Figure 5-8
PPPoE
If your DSL provider
says that you are connect-
ing through PPPoE or if
you normally enter a user
name and password to
access the Internet, per-
form these steps:
A. Select
PPPoE
, shown
in Figure 5-6, as the
WAN Connection
Type.
B.
Enter the
User Name
.
C.
Enter the
Password
.
D.
Click the
Apply
button to save the settings., or click the
Cancel
button to
clear the settings and start over.
E.
When you are finished, click the
Status
tab, and then click the
Connect
button to start the connection. Proceed to step 5.
RAS
RAS is a service used in
Singapore only. If you are
using a RAS connection,
check with your ISP for
the necessary setup infor-
mation.
When you are finished
with the Setup tab, shown
in Figure 5-7, proceed to
step 5.
Figure 5-6
Figure 5-7
Figure 5-8
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 53
EtherFast
®
Cable/DSL Router with QoS and 8-Port Switch
Chapter 6: The Router’s
Web-based Utility
Use the Router’s web-based utility to administer it. This chapter will describe
each web page in the Utility and each page’s key functions. The utility can be
accessed via your web browser through use of a computer connected to the
Router.
For a basic network setup, most users only have to use the following screens of
the utility:
• Setup
Enter the settings provided by your ISP.
• Password
The Router’s default password is
admin
. To secure the Router,
change the Password from its default.
The Status, DHCP, Log, Security, and Help tabs are also available for basic
setup. For advanced setup, click the Advanced tab to access these screens:
Filters, Forwarding, Dynamic Routing, Static Routing, DMZ Host, QoS, and
MAC Address Clone.
To access the web-based utility of the Router, launch Internet Explorer or
Netscape Navigator, and enter the Router’s default IP address,
192.168.1.1
(shown in Figure 6-1), in the Address field. Then press
Enter
.
24
23
Overview
Logging Onto the Web-based Utility
Figure 6-1
Instant Broadband
®
Series
5.
If you haven’t already done so, click the
Apply
button to save your Setup
settings. Close the web browser.
6.
Reset the power on your cable or DSL modem.
7.
Restart your computers so that they can obtain the Router’s new settings.
If you need advanced setting information, please refer to “Chapter 6: The
Router’s Web-based Utility” or the Linksys support website at
support.linksys.com
.
Test the setup by opening your web browser from any computer and enter-
ing
, as shown in Figure 5-9.
Congratulations! You’ve successfully configured the Router.
If you are unable to reach our website, you may want to review what you
did in this section or refer to “Appendix A: Troubleshooting.”
Proceed to “Chapter 6: The Router’s Web-based Utility” for more details
and advanced settings information.
Figure 5-9
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4 / 5 based on 1 vote.

Popular Linksys Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top