Page 16 / 86
Scroll up to view Page 11 - 15
Setup Wizard will guide you through a basic configuration procedure step by step. Press
”Next ”
Once the user finishes those steps and the router screen displayed as below. It means that the
Internet connection is now established.
8
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 86
Basic Setting
Please Select “Advanced Setup” to Setup
Primary Setup – WAN Type, Virtual Computers
10
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 86
This option is primary to enable this product to work properly. The setting items and the web
appearance depend on the WAN type. Choose correct WAN type before you start.
1. LAN IP Address: the local IP address of this device. The computers on your network must
use the LAN IP address of your product as their Default Gateway. You can change it if necessary.
2. WAN Type: WAN connection type of your ISP. You can click Change button to choose a
correct one from the following four options:
A. Static IP Address: ISP assigns you a static IP address.
B. Dynamic IP Address: Obtain an IP address from ISP automatically.
C. Dynamic IP Address with Road Runner Session Management. (e.g. Telstra BigPond)
D. PPP over Ethernet: Some ISPs require the use of
PPPoE to connect to their services.
E. PPTP: Some ISPs require the use of
PPTP to connect to their services.
F.
L2TP: Some ISPs require the use of
L2TP to connect to their services
Static IP Address
WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting
provided by your ISP.
12
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live