Page 6 / 86
Scroll up to view Page 1 - 5
Downloaded from
www.Manualslib.com
manuals search engine
Page 7 / 86
2. Unpacking and Setup
This chapter provides the package contents and setup information for the
N_Max
Wireless
Broadband Router.
Features
z
Extended and high-speed wireless connectivity with wireless
N
technology
z
Advanced QoS Services for Intelligent Internet
z
Backward compliant with IEEE802.11g and 11b standards
z
Operates on the 2.4GHz frequency band
z
Stay Protected with Advanced Network Security
z
WEP and WPA/WPA2-PSK encryption supported along with Wi-Fi Protected Setup
z
Integrate 4-Port Fast Ethernet Switch with 10/100Mbps MDI-MDI-X auto-sensing
z
Built-in NAT function allows multiple PCs and devices to share Internet connection
z
Browser-based interface configuration and management
z
Quick Setup Wizard provides alternative way to manage device
Package Contents
Open the box of the
N_Max
Wireless Broadband Router and carefully unpack it. The box should
contain the following items:
z
WBR-6001
N_Max
Wireless Broadband Router
z
Power Adapter
z
Cat.5 Cable
z
Antenna
z
CD Manual/Utility
z
Quick Installation Guide
If any item is found missing or damaged, please contact your local reseller for replacement.
3
Downloaded from
www.Manualslib.com
manuals search engine
Page 9 / 86
3. Hardware Installation
Product Layout – Front View
1) Reset
Press the Reset button to reboot device or restores factory default setting.
2) Status
A blinking light indicates the device is ready
3) WAN
A solid light indicates the WAN port is connected.
4) WLAN
A solid light indicates the Wireless segment is ready. LED blinks during wireless data transmission.
5) LAN LEDs
A solid light indicates to an Ethernet enable computer on ports 1~4.
LED blinks during data transmission.
6) WPS
Wi-Fi Protected Setup push button
5
Downloaded from
www.Manualslib.com
manuals search engine
Page 10 / 86
Product Layout – Rear View
1) Power Jack
Receptor for the supplied power adapter
2) LAN Ports (1~4)
Connect Ethernet devices such as computers, switches or hubs.
3) WAN Port
The WAN port is the connection for the Ethernet cable to the Cable or DSL Modem.
4) Antenna
Detachable antenna allows users to change antenna if necessary.
Hardware installation steps
Decide where to place your Wireless Broadband Router
You can place your Wireless Broadband Router on a desk or other flat surface. For optimal
performance, place your Wireless Broadband Router in the center of your office (or your home) in a
location that is away from any potential source of interference, such as a metal wall or microwave
oven. This location must be close to power and network connection.
Setup LAN connection
z
Wired LAN connection: connects
an Ethernet cable from your computer’s Ethernet port to one of
the LAN ports of this product.
z
Wireless LAN connection: locate this product at a proper position to gain the best transmit
performance.
6
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live