56

Internet Time

The router’s clock must synchronize with global Internet’s time. The time you set in the

screen will be adapted to system log.

1. Automatically synchronize with Internet time servers:

If you want the router to Automatically synchronize with Internet

time servers, select this item to enable it.

2. First NTP time server:

Select available NTP time server.

3. Time zone offset:

Choose the time zone of your country where you are going to use the

router.

4.

To Apply or save the

Internet Time Configuration

, click

Apply/Save.

57

Access Control / Passwords

Access to your DSL router is controlled through three kinds of user rights: admin, support,

and user. Currently only one is available.

1. Username:

Admin:

The admin has unrestricted access to change and view

configuration of your DSL Router.

Only available in customized version:

Support:

Is used to allow an ISP technician to access your DSL

Router for maintenance and to run diagnostics.

User:

Can access the DSL Router, view configuration settings and

statistics, as well as, update the routers software.

To change the password

choose

the

user

you want to change the password and

write

the

Old Password

in the box and then the new password twice (

New Password and Confirm

password

), after that click

Apply/Save

to save the new password.

User

Default Password

admin

admin

support

support

user

user

58

Backup

To backup your configuration for the router to your computer, you can use Management

Settings Backup web page to save the settings.

To save the

Backup Settings

, click

Backup Settings

and save the file on your PC.

Update

To restore the DSL router settings, you may restore your router settings using your saved

files.

59

1. Settings File Name:

Browse the saved Config file on your PC and click

OK

.

2.

To restore the browsed Backup Settings, click

Update Settings.

Settings /

Restore Default

Restore DSL router settings to the factory defaults.

Note: Do not restore the factory defaults unless you are having difficulties with the Router

and have exhausted all other troubleshooting measures. Once the Router is reset, you will

have to re-enter all of your configuration settings.

To restore the

Default Settings

to the factory defaults, click

Restore Default Settings.

Update Software

This screen allows you to upgrade the Router’s firmware. Do not upgrade the firmware

unless you are experiencing problems with the Router or the new firmware has a feature

you want to use.

60

NOTE: The Router may lose the settings you have customized. Before your upgrade the

firmware, write down all of your custom settings. After you upgrade the firmware, you will

have to re-enter all of your configuration settings.

1. Step 1:

Obtain an updated software image file form your ISP.

2. Step 2:

Enter the path to the image file location in the box or click the

Browse

button to locate the image file.

3. Step 3:

Click the

Update Software

button once to upload the new image

file.

NOTE: The update process takes about 2 minutes to complete and your DSL Router will

reboot.

Reboot

To make effect the settings that you set for this router, please open the Management

Reboot web page and click the

Reboot

button reboot the Router and to invoke all settings.