41

DSL

The screen configures the DSL settings. These settings should only be adjusted by an

expert administrator.

Click the checkbox to enable corresponding modulation modes, and then click

“

Apply/Save

” to complete the settings.

UPnP

Universal Plug and Play (UPnP) allows Microsoft Windows to automatically configure the

Router for various Internet applications, such as gaming and video conferencing.

42

Interface Grouping

Interface Grouping supports multiple ports to PVC and bridging groups. Each group will perform as an

independent network.

Click

Add

to create new interface group. To support Interface Grouping feature, you must create

mapping groups with appropriate LAN and WAN interfaces. Then click

Save/Apply

. Only the default

group has IP interface.

43

Field

Description

Group Name

Enter a name for this group.

WAN Interface used in the

grouping

Select a WAN interface used in this grouping fro the

drop-down list.

Grouped LAN Interfaces

Select interfaces from the Available LAN Interfaces list

and use the arrow buttons to map them to the Grouped

LAN Interfaces list.

Available LAN interfaces

These are the available LAN interfaces on 8520-B1.

Automatically Add Clients

with the following DHCP

Vendor IDs

Configure a DHCP vendor ID. Any DHCP client

requests with the specified vendor ID will be denied an

IP address from the local DHCP server.

44

Multicast / IGMP Configuration

You can configure IGMP parameters on this screen, if you are not clear about the IGMP, we

recommend using the default configuration.

If you want to modify the configured parameters, please make sure whether the router

’

s IGMP feature

is enabled.

45

Wireless

The Wireless Configurations are available under the

Wireless

tab.

Basic

To set the basic configuration for the wireless features, please open Basic item from the

Wireless menu.

To enable the Wireless Network, select

Enable Wireless

and click

Apply/Save

. You will

get the screen below.

1. Enable Wireless:

Click this check box to enable the wireless network function.

2. Hide SSID:

Checking this box can hide the SSID of this access point. Then other

people in the network cannot find the SSID of this device.

3. Clients Isolation:

To make the communication between the clients, please choose Off.

To cut the communication between the clients, please choose On.

4. Disable WMM Advertise:

Wi-Fi Multimedia (WMM) is a Wi-Fi Alliance interoperability

certification, based on the IEEE 802.11e standard. It provides basic

Quality of Service (QoS) features to IEEE 802.11 networks. WMM

prioritizes traffic according to four Access Categories (AC)

–

voice,

video, best effort and background.

5. SSID:

The SSID is the identification character of a router. It is the network

name shared among all points in a wireless network.

Please be noted that if you want to communicate, all wireless clients

should use the same SSID with the router or access point.

6.

To Apply or save the

Wireless Basic

settings, click

Apply/Save

.