Huawei SmartAX-MT880av3 Router Manual PDF (Setup & Configuration Guide)

Page 11 / 20 Scroll up to view Page 6 - 10

6

2.3

Connecting Multiple Telephones

If your telephone line is used for the broadband network access, telephone connections,

and fax connections, take the following figure as a reference for connecting the cables.

POWER

LAN

RESE T

#

1

2

1

2

3

4

5

6

5

ADSL

7

8

1 Telephone jack on the wall

2 T connector

3 Microfilter

4 Splitter

5 Telephone

6 Fax

7 Computer

8 Power adapter

2.4

Getting Started

Press the power button on the top of the MT880a to power on the MT880a.

After you power on the MT880a, the ADSL indicator blinks (for less than three

minutes), indicating that the MT880a is being activated. Later, the ADSL indicator

becomes on. The POWER indicator is also on, indicating that the MT880a is working.

Page 12 / 20

7

3

Setting the Network-Access Parameters

By configuring the MT880a and the computer, you can choose any of the following

methods to surf the Internet:

z

Accessing the Network Through the Embedded PPP Dial-Up Software of the

MT880a

z

Accessing the Network Through the PPP Dial-Up Software on the Computer

3.1

Accessing the Network Through the

Embedded PPP Dial-Up Software of the MT880a

If you select this method for accessing the network, the MT880a starts to set up dial-up

connection automatically after the startup. You can access the network after you power

on the computer. You do not need to install any special dial-up software on the

computer or perform the dial-up operations on the computer. To configure the MT880a

and the computer for the network access, do as follows:

Step 1

Log in to the Web configuration page.

1.

Launch the Internet Explorer on the computer. Enter

http://192.168.1.1

in the address bar and press

Enter

.

2.

In the displayed dialog box, enter the user name and the password, and

then click

OK

.

By default, both the user name and the password are

admin

. After the password is

verified, you can access the Web configuration page.

Step 2

Enable the embedded dial-up function.

1.

In the navigation tree on the left of the configuration page, choose

Basic

>

WAN Setting

.

2.

Select a PVC number, such as

1

, from the

PVC

drop-down combo box.

3.

In the

VPI

and

VCI

text boxes, enter the VPI and VCI values that are

provided by the network operator .

4.

Select

Yes

from the

Active

drop-down combo box and select

Routing

from the

Mode

drop-down combo box.

5.

Enter the operator name, user name, and password in the

Login

Information

dialog box and keep the default settings of other parameters.

6.

Click

Submit

to save the settings.

After you complete the preceding settings, you can surf the Internet.

You need to perform the preceding operations only once. The next time when you

power on the computer, you can surf the Internet without performing any configuration.

Page 13 / 20

8

3.2

Accessing the Network Through the PPP

Dial-Up Software on the Computer

If you select this method for accessing the network, you need to install and configure

the dial-up software on the computer. In addition, you need to perform the dial-up

operations on the computer each time after the startup of the computer. To configure the

MT880a and the computer for the network access, do as follows:

Step 1

Set the working mode of the MT880a to

Bridge

.

For details, refer to the procedure for enabling the embedded dial-up function described

in

Step 2 in section

3.1 "Accessing the Network Through the Embedded PPP Dial-Up

Software of the MT880a." Select

Bridge

from the

Mode

drop-down combo box.

Step 2

Install and configure the PPP dial-up software on the computer.

The PPP dial-up software is preinstalled on certain computer operating systems. To

create a dial-up connection, do as follows (taking the Windows XP operating system as

an example):

1.

Choose

Start

>

All Programs

>

Accessories

>

Communications

>

Network Connections

.

2.

Click

Create a new connection

in

Network Tasks

to display the

New

Connection Wizard

window, and then click

3.

Select

Connect to the Internet

, and then click

4.

Select

Set up my connection manually

, and then click

5.

Select

Connect using a broadband connection that requires a user

name and password

, and then click

6.

Enter the name (as desired) of the dial-up connection in

ISP Name

, and

then click

7.

Select

Anyone's use

or

My use only

, and then click

8.

Enter the user name and password provided by the operator and used for

the dial-up connection, and then click

9.

Select

Add a shortcut to this connection to my desktop

, and then click

Finish

.

An icon for the dial-up connection is displayed on the desktop of the computer.

You need to perform the preceding operations only once for creating a network

connection. After the network connection is created, to access the network,

double-click the icon for the dial-up connection, and then click

Connect

in the

displayed dialog box.

Page 14 / 20

9

4

Configuring the MT880a

4.1

Changing the Administrator Password Used

for Logging In to the Web Configuration Page

For safety reasons or to make the password easy to remember, you can change the

log-in administrator password after logging in to the Web configuration page.

To change the password, do as follows:

Step 1

Choose

Tools

>

System Management

in the navigation tree to display the

system management page.

Step 2

Click

to display a dialog box.

Step 3

Enter the old password and the new password, and then enter the new

password again in the

Retype to confirm

text box for confirmation.

Step 4

Click

Submit

.

After you change the password successfully, the current page jumps to the page for

logging in to the Web configuration page. To log in to the Web configuration page,

enter the new password, and then click

OK

.

If you cannot remember the user name and password that have been

changed, you can restore the default settings of the MT880a by pressing the

RESET button on the panel. In this way, the user name and the password

used for logging in to the Web configuration page are restored to default

values.

4.2

Changing the IP Address

To make the IP address easy to remember, you can change the IP address after logging

in to the Web configuration page.

To change the IP address, do as follows:

Step 1

Choose

Basic

>

LAN Setting

in the navigation tree to display the LAN

settings page.

Step 2

Enter a new IP address in the

IP Address

text box.

Step 3

Click

Submit

.

After the IP address is changed successfully, to log in to the Web configuration page,

you need to launch the Internet Explorer and enter the new IP address in the address bar.

Page 15 / 20

10

Ensure that the IP address of the computer is in the same network segment as that of the

IP address of the MT880a so that the computer can access the Web configuration page.

4.3

Restoring Default Settings

To restore default settings, log in to the Web configuration page, and then do as

follows:

Step 1

Choose

Tools

>

Reboot

in the navigation tree to display the reboot page.

Step 2

Select

Factory Default Settings

.

Step 3

Click

Restart

.

After the preceding operations, the page jumps to the login page. You can log in to the

Web configuration page by entering the user name and the password that are

admin

.

5

FAQs

What can I do if I cannot visit Web sites through the terminal?

Step 1

Check whether the POWER indicator of the terminal is on.

If the POWER indicator is off, perform further checks as follows:

1.

Ensure that the power switch of the terminal is turned on.

2.

Ensure that electricity comes from the socket and that the input power

of the socket meets the requirements described on the label of the

terminal power adapter. If the voltage is unsteady, for example, if the

voltage is too high or too low, do not use the terminal. Wait until the

voltage restores to its normal level, and then use the terminal.

3.

Ensure that the terminal is properly connected to the socket through the

power adapter.

If the POWER indicator is still off, contact an authorized maintenance center.

Step 2

After powering on the terminal, wait for about three minutes. Then check

whether the ADSL indicator of the terminal is on.

If the ADSL indicator blinks for a long time, perform further checks as follows:

1.

Ensure that telephone lines are properly connected. Pay special

attention to the connection between the telephone line and splitter.

2.

Ensure that terminal cables or telephone lines are far from the electric

appliances that generate strong magnetic or electric fields.

3.

Replace telephone lines.

If the ADSL indicator still blinks, contact your network operator.

Step 3

Check whether the LAN indicator of the terminal is on.

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share