Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 41 / 358 Scroll up to view Page 36 - 40

Table 3-2

Configuration methods supported in the FTTH service

Service

Type

Configurat

ion by

Using OLT

Commands

Configurat

ion by

Using the

U2000

Configurat

ion by

Using Web

Interface

Configurat

ion by

Using

TR-069

Server

Configurat

ion by

Issuing

XML

Configurat

ion File

Layer 2

Internet

access

service

Supported

Configuratio

n is not

needed.

Configuratio

n not needed.

Configuratio

n not needed

Layer 3

Internet

access

service

Coordinatio

n of other

methods is

required.

Supported

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Layer 2

multicast

service

Supported

Configuratio

n is not

needed.

Configuratio

n is not

needed.

Configuratio

n is not

needed.

Layer 3

bridge

multicast

service

Coordinatio

n of other

methods is

required.

Supported

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Voice

service

Coordinatio

n of other

methods is

required.

Supported

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Wi-Fi

service

Not

supported

Not

supported

Supported

NOTE

Currently, the HG8240/HG8245/HG8247 supports only the U2560 as the TR-069 server. Therefore, the TR-069

configuration in this chapter is the U2560 configuration.

The following section provides key technologies involved in these methods:

l

ONT management and control interface (OMCI) is a protocol defined in ITU-T G.984.4.

OMCI defines the format and mechanism of the interactive messages between the GPON

OLT and ONTs. It analyzes the service model of ONT services and defines a series of

management entities used for the service description.

OMCI defines the format of the message exchanged between the GPON OLT and ONTs

and the message acknowledgment and retransmission mechanism. In this way, the OMCI

provides a logical channel for communication. Operators can manage and configure ONTs

(including port attribute and port VLAN) using OLT commands or the U2000. In addition,

OMCI supports configuring an ONT offline and restoring the ONT configuration after the

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-3

Page 42 / 358

ONU goes online. With this management mechanism, ONTs do not need to save their own

configuration information. This facilitates service provisioning and ONT maintenance. The

OMCI configuration mainly indicates the Layer 2 service configuration such as the Layer

2 Internet access service and the Layer 2 multicast service.

l

TR-069 is a WAN management protocol for CPEs. It implements automatic configuration

on ONTs by using auto-negotiation interactive protocol between the application control

server (ACS) and the CPE. The TR-069 protocol supports the following management

functions:

–

Automatic configuration and dynamic service provision

–

Software and firmware mapping management

–

Status and performance monitoring

–

Fault diagnosis

l

The extensible markup language (XML) file can be configured in the following two ways:

–

Issuing XML configurations by using Web interface: Web interface stores the

configuration information about the ONT in an XML configuration file, and imports

the file for the ONT; then the ONT parses the configuration information in the file for

processing and storing.

–

Issuing XML configurations by using the U2000: The U2000 stores the configuration

information about the ONT in an XML configuration file, and transfers the file to the

OLT by using FTP; then the OLT further transfers the file to the ONT by using the

OMCI protocol; after receiving the file, the ONT parses the configuration information

in the file for processing and storing.

CAUTION

l

Web interface and the U2000 cannot use the same XML configuration file. The XML

configuration file of Web interface contains all configuration data, while the XML

configuration file of the U2000 contains only part of the configuration data.

l

H.248 and SIP can share the same XML configuration file, but the configurations

involving voice service need to be re-configured accordingly.

l

The XML configuration file is generally exported for modifying, and then imported

back. Configuration rolls back or even factory defaults are restored if an incorrect XML

configuration file is imported. When configuration parameters of an XML configuration

file need to be modified, please contact Huawei technical engineers for help.

3.2 Configuring the Service by Using the NMS

This topic describes how to configure Internet access service, VoIP service and IPTV service

by using the NMS.

3.2.1 Data Plan

This topic provides the data plan for the configuration examples of the GPON FTTH services.

You can configure the services according to the data plan.

3.2.2 Configuring GPON FTTH Layer 2 Internet Access Service on the NMS

This topic describes how to configure the high-speed Internet service when an ONT is connected

to an OLT through a GPON port.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-4

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 43 / 358

3.2.3 Configuring GPON FTTH Layer 3 Internet Access Service on the NMS

This topic describes how to configure the high-speed Internet service when an ONT is connected

to an OLT through a GPON port.

3.2.4 Configuring GPON FTTH Voice Service (H.248) on the NMS

This topic describes how to configure the voice service when an ONT is connected to an OLT

through a GPON port.

3.2.5 Configuring GPON FTTH Voice Service (SIP) on the NMS

This topic describes how to configure the voice service when an ONT is connected to an OLT

through a GPON port.

3.2.6 Configuring GPON FTTH Layer 2 Multicast Service on the NMS

This topic describes how to configure the multicast service when an ONT is connected to an

OLT through a GPON port.

3.2.7 Configuring GPON FTTH Layer 3 Bridge Multicast Service on the NMS

This topic describes how to configure the multicast service when an ONT is connected to an

OLT through a GPON port.

3.2.1 Data Plan

This topic provides the data plan for the configuration examples of the GPON FTTH services.

You can configure the services according to the data plan.

Data Plan

Table 3-3

Data plan for the GPON FTTH services

Service

Type

Item

Settings

Remarks

Device

managemen

t

Upstream port of an

OLT

0/19/0

-

GPON port of the

OLT

0/2/1

-

ONT

l

SN: 6877687714852901

l

Name: ONT

l

ONU Type: ONT

l

ONU ID: 0

l

Authentication Mode: SN

l

Terminal Type: 245

l

Software Version:

V1R002C00 or

V1R002C01

-

MEF IP traffic

profile

l

Name: FTTx

l

CIR: 20480

l

Outer Priority: 1

The MEF IP traffic

profile is used on the

ONT to control

upstream and

downstream traffic.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-5

Page 44 / 358

Service

Type

Item

Settings

Remarks

DBA profile

l

Name: FTTx

l

T-CONT type: Maximum

Bandwidth

l

Maximum Bandwidth:

32768

-

Line profile

l

Name: FTTx

l

Mapping Mode: VLAN

l

Qos Mode: Priority Queue

l

T-CONT Index: 1

l

DBA Profile: FTTx

l

GEM Port Index: 1

l

Priority Queue:1

-

Service profile

l

Name: FTTx

l

Number of Pots Ports: 2

l

Number of ETH Ports: 4

l

Vlan Type: Translation

l

C-VLAN: 100,1000

l

S-VLAN: 100,1000

-

Internet

service

VLAN

l

VLAN ID: 100

l

Type: Smart VLAN

-

Service port

l

Name: HSI

l

VLAN ID: 100

l

Interface Selection:

0/2/1/0/0

l

Service Type: Multi-

Service VLAN

l

User VLAN: 10

l

Keep the upstream and

downstream settings the

same: selected

l

Upstream Traffic Name:

FTTx

-

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-6

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 45 / 358

Service

Type

Item

Settings

Remarks

ONT value-added

services (Layer 3

routing)

l

Profile Name: ONT-HSI

l

Vendor ID: HWTC(2011)

l

Terminal Type: 245

l

Version: V1R002C00–

V1R002C01

l

WAN VLAN ID: 10

l

Service Type: INTERNET

l

Connection Type:

IP_Routed

l

Addressing Type: PPPoE

(User Name:

iadtest@pppoe, Password:

iadtest)

l

Priority: 1

l

NAT function: enable

l

Bound port: LAN1 (LAN1

is a Layer 3 LAN)

-

IPTV

service

VLAN

l

VLAN ID: 1000

l

Type: Smart VLAN

-

Service port

l

Name: IGMP

l

Vlan ID: 1000

l

Interface Selection:

0/2/1/0/0

l

Service Type: Multi-

Service VLAN

l

User VLAN: 30

l

Keep the upstream and

downstream settings the

same: selected

l

Upstream Traffic Name:

FTTx

-

Multicast VLAN

l

IGMP Version: IGMP V3

l

Work Mode: igmp_proxy

l

VLAN ID: 1000

-

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-7

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share