Huawei HG8247H Router Manual PDF (Setup & Configuration Guide)

Page 71 / 358 Scroll up to view Page 66 - 70

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add PPP

Connection

from the shortcut menu.

b.

Select

WAN PPP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-HSI

–

WAN Enable: enable

–

Connection Type: IP_Routed

–

NATEnable: Enable (NAT must be enabled to configure the Internet

access service.)

–

Service Type: INTERNET (For configuring the Internet access service,

INTERNET

or a combination containing

INTERNET

needs to be

selected.)

–

VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

–

Priority: 1

c.

Select

LAN&WANBindNode

below

WAN PPP Interface 1

and set

LAN1 Enabled

to

enable

for binding LAN 1 to the WAN port.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-33

Page 72 / 358

(6)

Click

OK

to complete the configuration of the new profile.

4.

Bind the value-added service profile.

(1)

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-

click the target OLT, or select the target OLT, right-click, and choose

NE

Explorer

.

(2)

In the navigation tree, choose

GPON

>

GPON ONU

.

(3)

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU

records.

(4)

Select an ONT from the list, right-click, and choose

Bind VAS Profile

from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and

click

OK

to complete profile binding.

5.

Configure the ONT value-added service.

(1)

On the

GPON ONU

tab page, select an ONT, right-click, and choose

Configure

Value-Added Service

from the shortcut menu.

(2)

Configure the user name and password for PPPoE dialup.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

>

WAN Connection 1

>

WAN PPP Interface

>

WAN PPP

Interface 1

. Select

WAN PPP Interface 1

, and set

User Name

to

iadtest@pppoe

and

Password

to

iadtest

. The user name and password must be

the same as those configured on the BRAS.

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-34

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 73 / 358

(3)

Click

OK

. In the dialog box that is displayed, click

OK

. After the device

automatically restarts, the configuration takes effect.

----End

Result

Check whether the user successfully gains access to the Internet through dialup on the PC.

1.

The LAN port of the ONT is connected to the Ethernet port of the PC properly.

2.

After the PC is configured to obtain its IP addresses automatically, the PC can obtain an

IP address allocated by the ONT using DHCP.

3.

After automatic PPPoE dialup is performed successfully on the ONT, users can access the

Internet.

3.2.4 Configuring GPON FTTH Voice Service (H.248) on the NMS

This topic describes how to configure the voice service when an ONT is connected to an OLT

through a GPON port.

Context

For details of the data plan, see Data Plan.

Example Network

l

The phones connected to different ONTs can communicate with each other.

l

The ONT obtains an IP address in Dynamic Host Configuration Protocol (DHCP) mode.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-35

Page 74 / 358

Figure 3-3

Configuring the GPON FTTH voice service (H.248 protocol)

Phone1

SoftX 3000

OLT

Phone2

LAN Switch

U2000

ONT

Optical splitter

Procedure

l

Add the ONT to the U2000 in profile mode.

1.

Configure an MEF IP traffic profile.

(1)

Choose

Configuration

>

Access Profile Management

>

Traffic Profile

from

the main menu.

(2)

Click the

MEF IP Traffic Profile

tab.

(3)

Right-click and choose

Add Global Profile

from the shortcut menu.

(4)

In the dialog box that is displayed, set the parameters.

–

Name: FTTx

3 Configuration

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3-36

Huawei Proprietary and Confidential

Issue 04 (2011-01-12)

Page 75 / 358

–

CIR: 20480

–

Outer Priority: 1

(5)

Click

OK

.

(6)

In the information list, right-click the record and choose

Download to NE

from

the shortcut menu.

(7)

In the dialog box that is displayed, select the required NE(s), and click

OK

.

2.

Configure a DBA profile.

(1)

Choose

Configuration

>

Access Profile Management

>

GPON Profile

from

the main menu.

(2)

Click the

DBA Profile

tab.

(3)

Right-click and choose

Add Global Profile

from the shortcut menu.

(4)

In the dialog box that is displayed, set the parameters.

–

Name: FTTx

–

T-CONT type: Maximum Bandwidth

–

Maximum Bandwidth: 32768

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

3 Configuration

Issue 04 (2011-01-12)

Huawei Proprietary and Confidential

3-37

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share