Huawei HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 36 / 364 Scroll up to view Page 31 - 35

3

Configuration

About This Chapter

This topic describes how to configure services through the NMS, the OLT CLI, the Web page

or the U2560.

Context

NOTE

l

The procedures for configuring HG8010/HG8110/HG8240/HG8245/HG8247/HG8447 are similar.

The following sections consider HG8247 as an example.

l

The following descriptions use V800R008C01 as the OLT, U2000 V100R003C00 as the BMS, and

U2560 V100R002C00 as the TR-069 server. Screen shots may vary with different versions but the

configuration procedures are similar. For details about configuration procedures, see the BMS

configuration manuals.

3.1 Before Your Start

This section provides common methods for configuring ONT services.

3.2 Configuring the Service by Using the NMS

This topic describes how to configure Internet access service, VoIP service and IPTV service

by using the NMS.

3.3 Configuration by Using OLT Commands

This topic describes how to configure the Internet access service, VoIP service and IPTV service

by using OLT commands.

3.4 Configuration on the Web Page

This topic describes how to configure Internet access service, VoIP service and Wi-Fi service

on the Web page.

3.5 Configuring the Service by Using U2560

This topic describes how to configure the Internet access service, VoIP service and Wi-Fi service

by using U2560.

3.6 Operation Guide on the XML Configuration File

This topic describes how to issue the XML configuration files on the Web page and on the

U2000.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

28

Page 37 / 364

3.1 Before Your Start

This section provides common methods for configuring ONT services.

Methods for configuring ONT services include configuring services by using the OLT

commands, U2000, Web interface, TR-069 server and by issuing XML configuration file.

Table

3-1

shows the application scenario of each configuration method.

Table 3-1

Application scenario of each configuration method

Configurati

on Method

Application Scenario

OLT

commands

This method uses the OMCI protocol to configure ONT services. It can be

used to add ONTs, configure ONT port attributes and port VLANs, and to

enable the Layer 2 service channels between the OLT and ONTs. It can

implement all configurations for Layer 2 services such as the Layer 2 Internet

access service and the Layer 2 multicast service. In the case of configuring

Layer 3 services such as the WAN port, ONT voice service, and Wi-Fi

service, coordination of one or more other methods is required.

U2000

This method can be used to configure Layer 2 services for the ONT by using

the OMCI protocol, and to configure ONT value-added service profile and

customized parameters. Customized parameters can be configured after batch

adding general configurations to facilitate configuration efficiency. This

method is recommended in batch service provisionings.

Web

interface

This method uses Web interface of the ONT to configure related ONT

parameters. In this method, batch configuration is not supported, and the

coordination of OLT commands or the U2000 is required. It is simple and is

generally used in the deployment.

TR-069

server

All the configurable nodes of the ONT are defined on the TR-069 server. The

TR-069 server supports real-time configuration and status query. In this

method, the coordination of OLT commands or the U2000 is required.

Issuing XML

configuration

file

The ONT voice service and gateway involve a large amount of configuration

information, most of which is not defined in the OMCI protocol and cannot

be configured on Web interface or the U2000. This method functions as a

supplement to Web interface and the U2000. In this method, the coordination

of OLT commands or the U2000 is required. This method is not recommended

because it is complex.

Table 3-2

lists configuration methods supported in the FTTH service.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

29

Page 38 / 364

Table 3-2

Configuration methods supported in the FTTH service

Service

Type

Configurat

ion by

Using OLT

Commands

Configurat

ion by

Using the

U2000

Configurat

ion by

Using Web

Interface

Configurat

ion by

Using

TR-069

Server

Configurat

ion by

Issuing

XML

Configurat

ion File

Layer 2

Internet

access

service

Supported

Configuratio

n is not

needed.

Configuratio

n not needed.

Configuratio

n not needed

Layer 3

Internet

access

service

Coordinatio

n of other

methods is

required.

Supported

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Layer 2

multicast

service

Supported

Configuratio

n is not

needed.

Configuratio

n is not

needed.

Configuratio

n is not

needed.

Layer 3

bridge

multicast

service

Coordinatio

n of other

methods is

required.

Supported

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Voice

service

Coordinatio

n of other

methods is

required.

Supported

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Coordinatio

n of OLT

commands

or the U2000

is required.

Wi-Fi

service

Not

supported

Not

supported

Supported

The following section provides key technologies involved in these methods:

l

ONT management and control interface (OMCI) is a protocol defined in ITU-T G.984.4.

OMCI defines the format and mechanism of the interactive messages between the GPON

OLT and ONTs. It analyzes the service model of ONT services and defines a series of

management entities used for the service description.

OMCI defines the format of the message exchanged between the GPON OLT and ONTs

and the message acknowledgment and retransmission mechanism. In this way, the OMCI

provides a logical channel for communication. Operators can manage and configure ONTs

(including port attribute and port VLAN) using OLT commands or the U2000. In addition,

OMCI supports configuring an ONT offline and restoring the ONT configuration after the

ONU goes online. With this management mechanism, ONTs do not need to save their own

configuration information. This facilitates service provisioning and ONT maintenance. The

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

30

Page 39 / 364

OMCI configuration mainly indicates the Layer 2 service configuration such as the Layer

2 Internet access service and the Layer 2 multicast service.

l

TR-069 is a WAN management protocol for CPEs. It implements automatic configuration

on ONTs by using auto-negotiation interactive protocol between the application control

server (ACS) and the CPE. The TR-069 protocol supports the following management

functions:

–

Automatic configuration and dynamic service provision

–

Software and firmware mapping management

–

Status and performance monitoring

–

Fault diagnosis

l

The extensible markup language (XML) file can be configured in the following two ways:

–

Issuing XML configurations by using Web interface: Web interface stores the

configuration information about the ONT in an XML configuration file, and imports

the file for the ONT; then the ONT parses the configuration information in the file for

processing and storing.

–

Issuing XML configurations by using the U2000: The U2000 stores the configuration

information about the ONT in an XML configuration file, and transfers the file to the

OLT by using FTP; then the OLT further transfers the file to the ONT by using the

OMCI protocol; after receiving the file, the ONT parses the configuration information

in the file for processing and storing.

CAUTION

l

Web interface and the U2000 cannot use the same XML configuration file. The XML

configuration file of Web interface contains all configuration data, while the XML

configuration file of the U2000 contains only part of the configuration data.

l

H.248 and SIP can share the same XML configuration file, but the configurations

involving voice service need to be re-configured accordingly.

l

The XML configuration file is generally exported for modifying, and then imported

back. Configuration rolls back or even factory defaults are restored if an incorrect XML

configuration file is imported. When configuration parameters of an XML configuration

file need to be modified, please contact Huawei technical engineers for help.

3.2 Configuring the Service by Using the NMS

This topic describes how to configure Internet access service, VoIP service and IPTV service

by using the NMS.

3.2.1 Data Plan

This topic provides the data plan for the configuration examples of the GPON FTTH services.

You can configure the services according to the data plan.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

31

Page 40 / 364

Data Plan

Table 3-3

Data plan for the GPON FTTH services

Service

Type

Item

Settings

Remarks

Device

managemen

t

Upstream port of an

OLT

0/19/0

-

GPON port of the

OLT

0/2/1

-

ONT

l

SN: 6877687714852901

l

Name: ONT

l

ONU Type: ONT

l

ONU ID: 0

l

Authentication Mode: SN

l

Terminal Type: 247

l

Software Version:

V1R002C06 or

V1R002C07

-

MEF IP traffic

profile

l

Name: FTTx

l

CIR: 20480

l

Outer Priority: 1

The MEF IP traffic

profile is used on the

ONT to control

upstream and

downstream traffic.

DBA profile

l

Name: FTTx

l

T-CONT type: Maximum

Bandwidth

l

Maximum Bandwidth:

32768

-

Line profile

l

Name: FTTx

l

Mapping Mode: VLAN

l

Qos Mode: Priority Queue

l

T-CONT Index: 1

l

DBA Profile: FTTx

l

GEM Port Index: 1

l

Priority Queue:1

-

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

32

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share