Page 351 / 364 Scroll up to view Page 346 - 350
5.10.1 Reboot
In the navigation tree on the left, choose
System Tools
>
Reboot
. In the pane on the right, click
Reboot
to restart the device, as shown in
Figure 5-43
.
Figure 5-43
Reboot
CAUTION
Save the configuration data before restarting the device. For details, see
5.10.2 Configuration
File
.
5.10.2 Configuration File
In the navigation tree on the left, choose
System Tools
>
Configuration File
. In the pane on
the right, click the button as required, as shown in
Figure 5-44
.
Figure 5-44
Configuration File
l
Click
Save Configuration
to save the current configuration to the flash memory. This
prevents data loss due to the restart of the device.
l
Click
Save and Reboot
to save the current configuration to the flash memory and then
reboot the device.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
343
Page 352 / 364
l
Click
Download Configuration File
. In the dialog box that is displayed, click
Save
, specify
the path of saving the configuration file, and then back up the file to the local disk.
l
Click
Browse
following the
Configuration File
text box. In the dialog box that is displayed,
select the configuration file to be uploaded. Click
Upload Configuration File
to upload
the configuration file that is saved in the local disk. After the configuration file is
successfully uploaded, the device automatically restarts and then the new configuration
takes effect.
CAUTION
Before uploading the configuration file, choose the configuration file with the correct type
and the name of the selected configuration file must not be the same as that of any file saved
in the device. Otherwise, the configuration file fails to be uploaded.
5.10.3 USB Backup Restore CFG
Click the
System Tools
tab and then choose
USB Backup Restore CFG
from the navigation
tree. In the pane on the right, the button as required, as shown in
Figure 5-45
.
Figure 5-45
USB Backup Restore CFG
l
Select
Enable restore from USB
to configure whether the system supports fast recovery
of the backed up configured file from the USB storage device.
l
Click
Backup configuration
to back up the configuration file to the specified USB storage
device.
CAUTION
After the configuration file in the USB storage device is successfully uploaded, the device is
restarted and then the new configuration data takes effect.
5.10.4 Firmware Upgrade
1.
In the navigation tree on the left, choose
System Tools
>
Firmware Upgrade
. In the pane
on the right, click
Browse
. In the dialog box that is displayed, select the target software
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
344
Page 353 / 364
version of the device. Click
Update Firmware
to upgrade the software of the device, as
shown in
Figure 5-46
.
Figure 5-46
Firmware Upgrade
2.
After the upgrade is successful, a message is displayed indicating that the device needs to
be reset. Click
Reset
. The configuration data takes effect after the device is reset.
5.10.5 Restore Default Configuration
In the navigation tree on the left, choose
System Tools
>
Restore Default Configuration
. In
the pane on the right, click
Restore Default Configuration
to restore the factory defaults, as
shown in
Figure 5-47
.
Figure 5-47
Restore Default Configuration
CAUTION
Exercise caution when you perform this operation because it restores factory defaults.
5.10.6 Ping Test
In the navigation tree on the left, choose
System Tools
>
Ping Test
. In the pane on the right,
enter the destination IP address for the ping test in the
IP Address
text box, and then click
Start
, as shown in
Figure 5-48
.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
345
Page 354 / 364
Figure 5-48
Ping test
l
If the ping test is successful,
The result
is displayed as
PASS
, that is, the ONT can interwork
with the device with the destination IP address.
l
If the ping test fails,
The result
is displayed as
FAIL
, that is, the ONT cannot interwork
with the device with the destination IP address.
5.10.7 Log
In the navigation tree on the left, choose
System Tools
>
Log
. In the pane on the right, click
Download log File
. In the dialog box that is displayed, click
Save
, specify the path of saving
the log file, and save the file to the local disk, as shown in
Figure 5-49
.
Figure 5-49
Log
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
346
Page 355 / 364
5.10.8 ONT Authentication
1.
In the navigation tree on the left, choose
System Tools
>
ONT Authentication
. In the pane
on the right, you can view or change the authentication mode for the registration of the
ONT on the OLT, as shown in
Figure 5-50
.
Figure 5-50
ONT Authentication
2.
Click
Apply
to apply the configuration.
NOTE
The user can modify the ONT SN by using the phone on condition that the ONT has never been online. Otherwise,
the ONT cannot be modified. The modification is performed as follows:
Connect the phone to the POTS port on an ONT, dial "**SN**SN#" (SN indicates ASCII codes), and then
restart the ONT.
5.10.9 Time Setting
1.
In the navigation tree on the left, choose
System Tools
>
Time Setting
. In the pane on the
right, set the parameters related to the system time, including the SNTP server, time zone,
and daylight saving time (DST), as shown in
Figure 5-51
.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
5 Web Page Reference
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
347

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top