1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG8247
    5. /
  5. 50
Page 246 / 364 Scroll up to view Page 241 - 245
Step 3
Save the configuration.
Choose
System Tools
>
Configuration File
from the navigation tree. In the right pane, click
Save Configuration
.
Step 4
Confirm the ONT.
Log in to the U2560 and then choose
Subnet view
>
TR-069 Subnet
from
WLAN and Home
Network View
in the navigation tree on the left. In the pane on the right, right-click and choose
Refresh
from the shortcut menu. The reported ONT list is displayed. Then, select the ONT list,
right-click, and choose
Confirm
from the shortcut menu.
----End
Result
On the U2560, you can configure ONT services. For details, see the configuration examples.
3.5.2 Data Plan
This topic plans the data in a unified manner for various example networks of connecting ONTs
in the FTTH GPON access mode. Subsequent examples are configured based on the following
data plan.
Table 3-15
shows the unified data plan for the HSI service, VoIP service and Wi-Fi service in
an FTTH network.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
238
Page 247 / 364
Table 3-15
Data plan for connecting ONTs in the FTTH GPON access mode
Configurat
ion Item
Data Item
Detailed Data
Remarks
WAN port
data
HSI service
(Layer 3
routing)
l
Service type: Internet
l
Connection mode: routing
l
VLAN ID: 10
l
IP address obtainment
mode: PPPoE (user name:
iadtest@pppoe, password:
iadtest)
l
802.1p: 1
l
NAT function: enable
l
Bound port: LAN1 (LAN1 is
a Layer 3 LAN)
l
For configuring HSI
service or Wi-Fi
service, Internet or a
combination
containing Internet
must be selected as the
service type. For
configuring VoIP
service, VoIP or a
combination
containing VoIP must
be selected as the
service type.
l
The VLAN ID of the
ONT must be the same
as the user-side VLAN
ID configured on the
OLT.
l
PPPoE must use the
same user name and
password as the upper-
layer BRAS.
l
The HSI service
involves the Layer 2,
Layer 3 bridge and
Layer 3 routing modes.
In the Layer 2 mode, all
configurations are
required only on the
OLT. The application
mode of the Layer 3
bridge mode is similar
to the Layer 2 mode. It
is recommended that
you use the Layer 2
mode.
l
The Wi-Fi service does
not support the Layer 2
mode.
VoIP service
l
Service type: VoIP
l
Connection mode: routing
l
VLAN ID: 20
l
IP address obtaining mode:
DHCP
l
802.1p: 6
Wi-Fi
service
(Layer 3
bridge)
l
Service type: Internet (not
configurable)
l
Connection mode: bridge
l
VLAN ID: 40
l
802.1p: 1
l
Bound port: SSID1
Wi-Fi
service
(Layer 3
routing)
l
Service type: Internet
l
Connection mode: routing
l
VLAN ID: 40
l
IP address Obtainment
mode: PPPoE (user name:
iadtest@pppoe, password:
iadtest)
l
802.1p: 1
l
NAT function: enable
l
Bound port: SSID1
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
239
Page 248 / 364
Configurat
ion Item
Data Item
Detailed Data
Remarks
VoIP service
data
SIP
parameters
l
IP address of the primary
server: 200.200.200.200
l
Port ID of the primary
server: 5060
l
Home domain name:
softx3000.huawei.com
l
Digitmap: x.S|x.# (Default)
l
User 1:
–
Phone number:
88001234
–
Authentication user
name:
uawei.com
–
Password: iadtest1
l
User 2:
–
Phone number:
88001235
–
Authentication user
name:
uawei.com
–
Password: iadtest2
The software version that
supports SIP is
V100R002C06.
H.248
parameters
l
Primary MGC address:
200.200.200.200
l
Primary MGC port: 2944
l
MID format: domain name
l
MG domain name:
6877687714852901
l
TID: A0 and A1
The software version that
supports H.248 is
V100R002C07.
Wi-Fi
service
SSID1
ChinaNet-huawei
-
Security
mode
WPA Pre-Shared Key
WPA
encryption
mode
l
TKIP&AES
l
Key: chinahuawei
3.5.3 Configuring the Internet Access Service Through the U2560
This topic provides an example of how to configure the Internet access service through the
U2560.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
240
Page 249 / 364
Prerequisite
l
The Layer 2 service channels between the OLT and ONTs are enabled by running the OLT
commands. For details, see
Enabling Layer 2 Service Channels Between an OLT and
a GPON ONT (on the OLT CLI)
.
l
The ONT is auto discovered on the U2560. For details, see
Commissioning Interoperation
Between the U2560 and the ONT Through the Web Page
.
l
The user-side PC must be connected with the LAN port of an ONT by using network cables.
Context
The Internet access service includes the Layer 2 Internet access service and Layer 3 Internal
access service.
l
Layer 2 Internet access service: The PPPoE dialup is performed on the PC. The IP address
is allocated by the upper-layer BRAS. The ONT is connected to the OLT and then to the
upper-layer network in the Layer 2 mode to provide the high-speed Internet access service.
l
Layer 3 Internet access service: The PPPoE auto dialup is performed on the ONT. The IP
address is allocated by the DHCP IP address pool on the ONT. The ONT is connected to
the OLT and then to the upper-layer network in the Layer 3 mode to provide the high-speed
Internet access service.
You do not need to configure the Layer 2 Internet access service on the ONT, but you need to
only enable the Layer 2 service channels between the OLT and ONT. This topic describes only
how to configure the Layer 3 Internet access service.
Every data change must be saved. You can click
Save
in a window to save data changes. If you
navigate to another node without saving data changes, a dialog box will be displayed prompting
you to save the data changes. In this case, click
YES
in the dialog box. New data will be
automatically applied to the ONTs after the data changes are saved.
CAUTION
When configuring services on the U2560, do not modify the WAN interface connecting the
U2560 and the ONT. Otherwise, the U2560 loses communication with the ONT.
Procedure
Step 1
Log in to the U2560 and choose
Subnet View
>
TR069 Subnet
from the navigation tree. In the
terminal list, right-click an ONT and choose
Tools
>
Configure in Real Time
from the shortcut
menu.
Step 2
In the
Configure in Real Time
dialog box, set
Root Node
to
Internet gateway device
.
Step 3
Configure the working mode of a LAN port.
Choose
InternetGatewayDevice
>
LANDevice
>
1
>
LANEthernetInterfaceConfig
>
1
from
the navigation tree. In the right pane, set
X_HW_L3Enable
to
1
, indicating that port LAN1
works in the L3 mode.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
241
Page 250 / 364
NOTE
l
When
X_HW_L3Enable
is set to
0
, it indicates that the corresponding LAN port works in the L2
mode.
l
When
X_HW_L3Enable
is set to
1
, it indicates that the corresponding LAN port works in the L3
mode.
By default,
X_HW_L3Enable
is set to
0
.
Step 4
Configure the parameters of the WAN interface.
1.
Choose
InternetGatewayDevice
>
WANDevice
>
1
>
WANConnectionDevice
from the
navigation tree. Click
Add
in the lower left part to create an instance.
2.
Choose
2
>
WANPPPConnection
from the navigation tree and click
Add
in the lower left
part. Choose the new
1
branch from the navigation tree. In the right pane, set parameters
as follows:
l
Set
Enable
to
1
, indicating that the WAN connection is enabled.
l
Set
Connection Type
to
IP_Routed
, indicating that the connection type of the WAN
interface is in routing mode.
l
Set
NATEnable
to
1
, indicating that the NAT function is enabled.
l
Set
Username
to
iadtest@pppoe
and
Password
to
iadtest
, indicating that the PPPoE
user name is
iadtest@pppoe
and the password is
iadtest
.
l
Set
X_HW_SERVICELIST
to
INTERNET
, indicating that the WAN interface
provides Internet access.
l
Set
X_HW_VLAN
to
10
, indicating the VLAN ID of the WAN interface is 10.
l
Set
X_HW_PRI
to
1
, indicating the priority level of the WAN interface is 1.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
242

Rate

4 / 5 based on 1 vote.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top