Page 126 / 364
Scroll up to view Page 121 - 125
a.
In the Main Topology, double-click the required OLT in the
Physical Root
navigation tree; or right-click the required OLT and choose
NE Explorer
from
the shortcut menu.
b.
Choose
GPON
>
GPON Management
from the navigation tree.
c.
On the
GPON UNI Port
tab page, set the filter criteria to display the required
GPON UNI ports.
d.
In the information list, right-click GPON UNI port 0/2/1 and choose
Enable
ONU Auto Find
from the shortcut menu.
e.
Select the
ONU
tab page. Click the
Auto Discover ONUs
tab.
f.
In the window that is displayed, select
6877687714852901
as the ONU record
and click
Confirm
.
–
Name: ONT
–
ONU ID: 0
–
ONU Type: ONT
–
On the
Basic Parameters
tab page, set the parameters.
–
Line Profile: FTTx (click
next to
Line Profile
and select the line profile
named FTTx in the dialog box that is displayed)
–
Service Profile: FTTx (click
next to
Service Profile
and select the
service profile named FTTx in the dialog box that is displayed)
–
Authentication Mode: SN
–
Terminal Type: 247
–
Software Version: V1R002C06 (or V1R002C07)
g.
Click
OK
.
l
Configure the multicast service.
The prerequisite for performing operations in the navigation tree is to navigate to the NE
Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
118
Page 127 / 364
Main Topology, double-click the required OLT in the
Physical Root
navigation tree; or
right-click the required OLT and choose
NE Explorer
from the shortcut menu.
1.
Configure a service VLAN on the OLT side.
A service VLAN is the VLAN used for the multicast service.
a.
Choose
VLAN
from the navigation tree.
b.
On the
VLAN
tab page, right-click and choose
Add
from the shortcut menu.
c.
In the dialog box that is displayed, set the parameters.
–
VLAN ID: 1000
–
Type: Smart VLAN
d.
Click
Next
. Click the
Upstream Port
tab and add upstream port 0/19/0 as the
upstream port of the VLAN.
e.
Click
Done
.
2.
Add a service virtual port on the OLT side.
a.
On the
VLAN
tab page, select the record where
VLAN ID
is set to
1000
and
click the
ServicePort
tab in the lower pane.
b.
In the information list, right-click and choose
Add
from the shortcut menu.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119
Page 128 / 364
c.
In the dialog box that is displayed, set the parameters.
–
Name:IGMP
–
VlAN Choice: Smart VLAN
–
Connection Type: LAN-GPON (when the physical port is a GPON port) or
LAN-EPON (when the physical port is an EPON port)
–
Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or
0/2/1/0 (when the connection type is LAN-EPON)
–
Vlan ID: 1000 (SVLAN ID)
–
Service Type: Multi-Service VLAN
–
User VLAN: 30 (CVLAN ID)
–
Keep the upstream and downstream settings the same: selected
–
Upstream Traffic Name: ip-traffic-table_6 (it is recommended that you use
the default profile ip-traffic-table_6 because the OLT does not limit the rates
of service streams)
d.
Click
OK
.
3.
Add a multicast VLAN on the OLT side.
a.
Choose
Multicast
>
Multicast VLAN
from the navigation tree.
b.
On the
Multicast VLAN
tab page, set the filter criteria to display the required
multicast VLANs.
c.
In the information list, right-click and choose
Add
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
IGMP Version: IGMP V3
–
Work Mode: igmp_proxy
–
VLAN ID: 1000
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
Page 129 / 364
e.
Click
Finish
.
4.
Add a virtual upstream port for the multicast service on the OLT side.
a.
Choose
Multicast
>
Virtual Uplink Port
from the navigation tree.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
121
Page 130 / 364
b.
On the
Virtual Uplink Port
tab page, set the filter criteria to display the required
virtual upstream ports.
c.
In the information list, right-click and choose
Add
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
VLAN ID: 1000
–
Frame: 0
–
Slot: 19
–
Port: 0
e.
Click
Done
.
5.
Configure a program profile on the OLT side.
a.
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
IGMP Profile
from the navigation tree.
b.
Click the
Program Profile
tab, and select the required device type from the
Device Type
drop-down list.
c.
Right-click and choose
Add Global Profile
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
Name: program1
–
Start IP Address: 224.0.1.1 (IP address of the multicast program)
–
End IP Address: 224.0.1.1
–
Source IP Address:
10.10.10.20 (IP address of the multicast server)
–
Preview Profile: 0 (the default value)
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
122
19216811.live