1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG8247
    5. /
  5. 21
Page 101 / 364 Scroll up to view Page 96 - 100
NOTE
The parameters of the SIP-based voice user must be consistent with the corresponding
configuration on the softswitch.
a.
In the navigation tree, choose
Services
>
Voice Service
>
Voice Service
1
>
Interface configuration
>
Interface1
>
User
>
User 1
. Select
User
1
and set
Directory Number
to
88001234
.
b.
Select
SIP
below
User 1
and enter a proper value.
–
Auth User Name: [email protected]
–
Auth Password: iadtest1
c.
Set parameters of
User 2
using the same method.
–
Directory Number: 88001235
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
93
Page 102 / 364
–
Auth User Name: [email protected]
–
Auth Password: iadtest2
c.
Click
OK
. In the dialog box that is displayed, click
OK
. The configurations take
effect without the requirement of resetting the ONT.
----End
Result
Check whether the telephone functions properly. Connect two common telephones phone 1 and
phone 2 to two TEL ports on the ONT and test the dialing between phone 1 and phone 2. In
normal cases:
l
The caller hears the dialing tone after taking the phone off the hook.
l
When the caller dials the telephone number of the callee, the phone of the callee rings
successfully, and the caller hears the ring back tone.
l
The caller and the callee communicate with each other successfully.
l
After the callee hangs up, the caller hears the busy tone.
3.2.6 Configuring GPON FTTH Layer 2 Multicast Service on the
NMS
This topic describes how to configure the multicast service when an ONT is connected to an
OLT through a GPON port.
Context
For details of the data plan, see Data Plan.
Example Network
l
The ONT is connected to the OLT in Layer 2 mode.
l
The OLT uses IGMP proxy, which is a Layer 2 multicast protocol.
l
The IGMP version of the multicast VLAN is IGMPv3.
l
Multicast programs are configured statically.
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
94
Page 103 / 364
Figure 3-5
Configuring the GPON FTTH multicast service
Multicast Source
OLT
LAN Switch
Optical splitter
U2000
STB
TV
BRAS
ONT
Procedure
l
Add the ONT to the U2000 in profile mode.
1.
Configure an MEF IP traffic profile.
a.
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
Traffic Profile
from the navigation tree.
b.
Click the
MEF IP Traffic Profile
tab.
c.
Right-click and choose
Add Global Profile
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
Name: FTTx
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
Page 104 / 364
–
CIR: 20480
–
Outer Priority: 1
e.
Click
OK
.
f.
In the information list, right-click the record and choose
Download to NE
from
the shortcut menu.
g.
In the dialog box that is displayed, select the required NE(s), and click
OK
.
2.
Configure a DBA profile.
a.
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
PON Profile
>
GPON Profile
from the
navigation tree.
b.
Click the
DBA Profile
tab.
c.
Right-click and choose
Add Global Profile
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
Name: FTTx
–
T-CONT type: Maximum Bandwidth
–
Maximum Bandwidth: 32768
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
96
Page 105 / 364
e.
Click
OK
.
f.
In the information list, right-click the record and choose
Download to NE
from
the shortcut menu.
g.
In the dialog box that is displayed, select the required NE(s), and click
OK
.
3.
Configure a line profile.
In a line profile, a GEM port can be bound to up to eight service streams. In a GEM
port, different GEM connections need to be set up for different service streams.
In this example, the mapping between GEM ports and MDU-side services is
implemented through VLANs, and the service streams of each service are mapped to
GEM port 1. In addition, different GEM connections are set up for the management
VLAN and the VLANs for the Internet, voice, and multicast services.
a.
Choose
Configuration
>
Access Profile Management
from the main menu. In
the dialog box that is displayed, choose
PON Profile
>
GPON Profile
from the
navigation tree.
b.
Click the
Line Profile
tab.
c.
Right-click and choose
Add Global Profile
from the shortcut menu.
d.
In the dialog box that is displayed, set the parameters.
–
Set
Name
to
FTTx
.
–
Choose
Base Info.
from the navigation tree and set the parameters.
–
Mapping Mode: VLAN
–
Qos Mode: Priority Queue
EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/
HG8447 GPON Terminal
Service Manual
3 Configuration
Issue 02 (2011-12-08)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
97

Rate

4 / 5 based on 1 vote.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top