Huawei HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 66 / 364 Scroll up to view Page 61 - 65

b.

In the information list, right-click and choose

Add

from the shortcut menu.

c.

In the dialog box that is displayed, set the parameters.

–

Name: HSI

–

VlAN Choice: Smart VLAN

–

VLAN ID: 100 (SVLAN ID)

–

Connection Type: LAN-GPON (when the physical port is a GPON port) or

LAN-EPON (when the physical port is an EPON port)

–

Interface Selection: 0/2/1/0/1 (when the connection type is LAN-GPON) or

0/2/1/0 (when the connection type is LAN-EPON)

–

Service Type: Multi-Service VLAN

–

User VLAN: 10

–

Keep the upstream and downstream settings the same: selected

–

Upstream Traffic Name: ip-traffic-table_6 (it is recommended that you use

the default profile ip-traffic-table_6 because the OLT does not limit the rates

of service streams in the management VLAN)

d.

Click

OK

.

3.

Configure the value-added service profile of the ONT.

a.

From the main menu, choose

Configuration

>

Access Profile Management

. In

the navigation tree of the tab page that is displayed, choose

PON Profile

>

ONT

VAS Profile

.

b.

On the

ONT VAS Profile

tab page, right-click, and choose

Add

from the shortcut

menu.

c.

In the dialog box that is displayed, set relevant parameters.

–

Profile Name: ONT-HSI

–

Vendor ID: HWTC(2011)

–

Terminal Type: 247

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

58

Page 67 / 364

–

Version: V1R002C06-Later

d.

Configure the working mode of a LAN port.

In the navigation tree, choose

LANDevice

>

LAN Interface 1

>

LAN

Interface

>

LAN Ethernet Configuration 1

. Select

LAN Ethernet

Configuration 1

and set

LAN port two three-port enable

to

enable

(indicating

that LAN 1 works in the Layer 3 mode).

NOTE

l

If

LAN port two three-port enable

is

disable

, the LAN port works in the Layer 2

mode.

l

If

LAN port two three-port enable

is

enable

, the LAN port works in the Layer 3

mode.

LAN port two three-port enable

is defaulted to

disable

.

By default, the system has one

LAN Ethernet Configuration 1

node. To add nodes,

select

LAN Interface

, right-click, and choose

Add

from the shortcut menu.

e.

Configure parameters of a WAN port.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

59

Page 68 / 364

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add PPP

Connection

from the shortcut menu.

b.

Select

WAN PPP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-HSI

–

WAN Enable: enable

–

Connection Type: IP_Routed

–

NATEnable: Enable (NAT must be enabled to configure the Internet

access service.)

–

Service Type: INTERNET (For configuring the Internet access service,

INTERNET

or a combination containing

INTERNET

needs to be

selected.)

–

VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user-

side VLAN ID configured on the OLT.)

–

Priority: 1

f.

Configure a routing policy.

a.

In the navigation tree, choose

Layer 3 Forwarding

>

Policy Route

. Select

Policy Route

, right-click, and choose

Add

.

b.

Choose

Policy Route 1

and enter proper values.

–

Physical Port Name: LAN1

–

WAN Interface Name: WAN1(ONT-HSI)

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

60

Page 69 / 364

NOTE

To bind a LAN port to a WAN port, set

Physical Port Name

and

WAN Interface

Name

. The preceding figure shows that WAN 1 is bound to LAN 1.

To bind a WAN port to multiple LAN ports, set

Physical Port Name

to

LAN1,...,LANx

. For example, to bind WAN 1 to LAN 1 and LAN 2, set

Physical Port

Name

to

LAN1,LAN2

.

g.

Click

OK

to complete the configuration of the new profile.

4.

Bind the value-added service profile.

a.

In the

Physical Map

navigation tree on the

Main Topology

tab page, double-

click the target OLT, or select the target OLT, right-click, and choose

NE

Explorer

.

b.

In the navigation tree, choose

GPON

>

GPON Management

.

c.

In the window on the right, choose

GPON ONU

.

d.

On the

GPON ONU

tab page, set the search criteria to find the GPON ONU

records.

e.

Select an ONT from the list, right-click, and choose

Bind VAS Profile

from the

shortcut menu. In the dialog box that is displayed, choose the created profile, and

click

OK

to complete profile binding.

5.

Configure the ONT value-added service.

a.

On the

GPON ONU

tab page, select an ONT, right-click, and choose

Configure

Value-Added Service

from the shortcut menu.

b.

Configure the user name and password for PPPoE dialup.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

>

WAN Connection 1

>

WAN PPP Interface

>

WAN PPP

Interface 1

. Select

WAN PPP Interface 1

, and set

User Name

to

iadtest@pppoe

and

Password

to

iadtest

. The user name and password must be

the same as those configured on the BRAS.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

61

Page 70 / 364

c.

Click

OK

. In the dialog box that is displayed, click

OK

. The configurations take

effect without the requirement of resetting the ONT.

----End

Result

Check whether the user successfully gains access to the Internet through dialup on the PC.

1.

The LAN port of the ONT is connected to the Ethernet port of the PC properly.

2.

After the PC is configured to obtain its IP addresses automatically, the PC can obtain an

IP address allocated by the ONT using DHCP.

3.

After automatic PPPoE dialup is performed successfully on the ONT, users can access the

Internet.

3.2.4 Configuring GPON FTTH Voice Service (H.248 Protocol) on

the NMS

This topic describes how to configure the voice service when an ONT is connected to an OLT

through a GPON port.

Context

For details of the data plan, see Data Plan.

Example Network

l

The phones connected to different ONTs can communicate with each other.

l

The ONT obtains an IP address in Dynamic Host Configuration Protocol (DHCP) mode.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

62

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share