Huawei HG8245T Router Manual PDF (Setup & Configuration Guide)

Page 36 / 429 Scroll up to view Page 31 - 35

Service

Type

Item

Settings

Remarks

VoIP

service

VLAN

l

VLAN ID: 200

l

Type: Smart VLAN

-

Service port

l

Name: VOIP

l

Vlan ID: 200

l

Interface Selection:

0/2/1/0/1

l

Service Type: Multi-

Service VLAN

l

User VLAN: 20

l

Keep the upstream and

downstream settings the

same: selected

l

Upstream Traffic Name:

FTTx

-

ONT value-added

services (H.248)

l

Profile Name: ONT-VoIP

l

Vendor ID: HWTC(2011)

l

Terminal Type: 247

l

Version: V2R005C00–

V2R005C01

l

WAN VLAN ID: 20

l

Service Type: VoIP

l

Connection Type:

IP_Routed

l

Priority: 6

l

Signaling Protocol: H248

l

Primary MGC:

200.200.200.200

l

MID Format: Domain name

l

MGC Port: 2944

l

MGC Domain name:

6877687714852901

l

TID: A0 and A1

The software

version that supports

H.248 is

V200R005C01.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

28

Page 37 / 429

Service

Type

Item

Settings

Remarks

ONT value-added

services (SIP)

l

Profile Name: ONT-VoIP

l

Vendor ID: HWTC(2011)

l

Terminal Type: 247

l

Version: V2R005C00–

V2R005C01

l

WAN VLAN ID: 20

l

Service Type: VoIP

l

Connection Type:

IP_Routed

l

Priority: 6

l

Signaling Protocol: SIP

l

Proxy Server:

200.200.200.200

l

SIP Server Port: 5060

l

Home Domain:

softx3000.huawei.com

l

Digitmap: x.S|x.# (Default)

l

User 1: Directory Number

is 88001234; Auth User

Name is

[email protected]

wei.com; Auth Password is

iadtest1

l

User 2: Directory Number

is 88001235; Auth User

Name is

88001235softx3000.huawe

i.com; Auth Password is

iadtest2

The software

version that supports

SIP is

V200R005C00.

3.2.2 Configuring GPON FTTH Layer 2 Internet Access Service on

the NMS

This topic describes how to configure the high-speed Internet service when an ONT is connected

to an OLT through a GPON port.

Context

For details of the data plan, see Data Plan.

Example Network

l

The PC gains access to the Internet in PPPoE dialup mode.

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

29

Page 38 / 429

l

The ONT is connected to the GPBC card of the OLT through an optical fiber.

l

The broadband remote access server (BRAS) provides the authentication, authorization,

and accounting (AAA) functions.

Figure 3-1

Configuring the GPON FTTH Internet service

OLT

ONT

PC

BRAS

LAN Switch

Optical splitter

U2000

Procedure

l

Add the ONT to the U2000 in profile mode.

1.

Perform the following operations to add an MDU (not managed by the NAT

agent) that supports xPON upstream transmission.

(1)

On the topological navigation tree, select the required ODN under the OLT node.

Select the splitter under the ODN, right-click, and then choose

New

>

ONU

; or

select the splitter under the ODN, right-click the blank area on the

Physical

Root

interface on the right side, and then choose

New

>

ONU

.

(2)

On the interface that is displayed, set the parameters on the

Basic Parameters

and

Network Management Channel Parameters

tab pages (on this interface,

the ONU that supports the GPON upstream mode is considered as an example).

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

30

Page 39 / 429

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

31

Page 40 / 429

NOTE

l

When the OLT works in the profile mode, the ONU that supports the GPON upstream

mode needs to be bound with the GPON line profile.

l

When the OLT works in the distributed mode, the ONU that supports the GPON upstream

mode needs to be bound with the ONU capacity profile.

l

When the

OLT sets network management channel parameters

check box is cleared,

ONUs are configured and managed remotely on the OLT through the OMCI protocol.

l

When the

OLT sets network management channel parameters

check box is selected,

ONUs are configured and managed remotely on the OLT through the SNMP protocol.

l

Do not add the SNMP parameters on the ONU through the serial port, but issue the SNMP

profile from the OLT to the ONU only.

(3)

Click

OK

.

(4)

In the Main Topology, double-click the required OLT in the

Physical Root

navigation tree; or right-click the required OLT and choose

NE Explorer

from

the shortcut menu.

(5)

Choose

VLAN

from the navigation tree.

(6)

On the

VLAN

tab page, right-click and choose

Add

from the shortcut menu.

(7)

In the dialog box that is displayed, set the parameters.

–

VLAN ID: 4000

–

Type: Smart VLAN

(8)

Click

–

Click the

Upstream Port

tab and add upstream port 0/19/0 as the upstream

port of the VLAN.

–

Click the

L3 Interface

tab and set the parameters.

–

Configure L3 Interface: selected

–

IP Address: 192.168.50.4

(9)

Click

Finish

.

(10) Choose

GPON

>

GPON Management

from the navigation tree.

(11)

On the

GPON ONU

tab page, set the filter criteria or click

to display the

GPON ONUs.

(12)

In the information list, select the record where the shelf, slot, port, and ONU IDs

are 0, 2, 1, and 0 respectively and click the

ServicePort Info

tab in the lower

pane.

(13)

On the

ServicePort Info

tab page, right-click and choose

Add

from the shortcut

menu.

(14)

In the dialog box that is displayed, set the parameters.

–

Connection Type: LAN-GPON

–

VLAN ID: 4000

–

Interface Selection: 0/2/1/0/0

–

Service Type: Multi-Service VLAN

–

User VLAN: 4000

–

Keep the upstream and downstream settings the same: selected

EchoLife HG8010/HG8240B/HG8245T/HG8247T GPON

Terminal

Service Manual

3 Configuration

Issue 01 (2011-10-18)

Huawei Proprietary and Confidential

32

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share