Huawei HG8245H Router Manual PDF (Setup & Configuration Guide)

Page 106 / 232 Scroll up to view Page 101 - 105

Figure 4-10

Adding a GEM port

6.

Click

OK

.

7.

Add a GEM connection.

The following section considers L2 Internet access service as an example to describe how

to add a GEM connection. GEM connection 150, 200, 300, and 320 are used for L3 Internet

access service, voice service, Wi-Fi service, and TR-069 server management channel

respectively.

In the left pane, right-click

GEM Port0

that is created and choose

ADD GEM

Connection

from the shortcut menu. In the dialog box that is displayed, set

VLAN ID

to

100

, the CVLAN.

Figure 4-11

shows how to add a GEM connection.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-20

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 107 / 232

Figure 4-11

Adding a GEM connection

8.

Click

OK

.

9.

Right-click the new line profile and choose

Download to NE

from the shortcut menu. In

the dialog box that is displayed, select the required OLT and click

OK

.

Step 5

Configure the ONT service profile.

1.

Choose

Profile

>

PON

>

GPON Profile

from the main menu.

2.

In the window that is displayed, click the

GPON Service Profile

tab. On the

GPON Service

Profile

tab page, right-click and choose

Add Global Profile

from the shortcut menu.

Parameter values vary with terminal types.

Assume that the HG8240 or HG8245 is used. Set the parameters as follows:

l

Set

Name

to

srvprofile-gpon

.

l

Set

Number of Pots Ports

to

2

.

l

Set

Number of ETH Ports

to

4

.

Figure 4-12

shows how to configure the ONT service profile (HG8240/HG8245).

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-21

Page 108 / 232

Figure 4-12

Configuring the ONT service profile (HG8240/HG8245)

Assume that the HG8247 is used. Set the parameters as follows:

l

Set

Name

to

srvprofile-gpon

.

l

Set

Number of Pots Ports

to

2

.

l

Set

Number of ETH Ports

to

4

.

l

Set

Number of CATV Ports

to

1

.

Figure 4-13

shows how to configure the ONT service profile (HG8247).

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-22

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 109 / 232

Figure 4-13

Configuring the ONT service profile (HG8247)

NOTE

The port capability set in the ONT service profile must be the same as the actual port capability set

of the ONT. The HG8240 and HG8245 each has four Ethernet ports and two POTS ports. The HG8247

has one CATV port, four Ethernet ports, and two POTS ports.

3.

Configure the default VLAN ID.

The default VLAN ID of Ethernet port 1 is 100 for L2 Internet access service.

NOTE

This operation is applicable to only L2 Internet access service. Specifically, when an ONT works as

a bridge, packets must be labeled with VLAN tags before entering the ONT and the VLAN tags must

be stripped from the packets before the packets leave the ONT; when an ONT works as a gateway

device, the VLAN IDs of ports can be set on the Web page of the ONT, on the NMS, or on the TR-069

server.

In the dialog box as shown in

Figure 4-13

, choose

UNI Port

from the navigation tree. In

the right pane, right-click Ethernet port 1 and choose

Config VLAN of UNI Port

from the

shortcut menu. In the dialog box that is displayed, select the

Default VLAN

check box and

set

Default VLAN

to

100

, the CVLAN ID.

Figure 4-14

shows how to configure the default VLAN ID.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-23

Page 110 / 232

Figure 4-14

Configuring the default VLAN ID

4.

Click

OK

.

5.

Configure the VLAN switching pair of a UNI port.

The following section considers L2 Internet access service as an example to describe how

to configure the VLAN switching pair of a UNI port. Both

S-VLAN

and

C-VLAN

must

be set to 150, 200, 300, and 320 for L3 Internet access service, voice service, Wi-Fi service,

and TR-069 server management channel respectively.

In the lower pane, right-click and choose

Add

from the shortcut menu. In the dialog box

that is displayed, set both

S-VLAN

and

C-VLAN

to

100

. In this case,

S-VLAN

must be

the same as

C-VLAN

.

Figure 4-15

shows how to configure the VLAN switching pair of the UNI port.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-24

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share