Huawei HG8245A Router Manual PDF (Setup & Configuration Guide)

Page 146 / 232 Scroll up to view Page 141 - 145

The SIP-based voice service can be configured through the Web page, N2000 BMS, or TR-069

server.

4.5.1 Data Plan

This topic provides the typical data plan for configuring the SIP-based voice service to make

good preparations for the configuration.

Table 4-7

provides the data plan for configuring the SIP-based voice service.

Table 4-7

Data plan for configuring the SIP-based voice service

Parameter

Data

Description

Service type of

the WAN

interface

VoIP

When configuring the voice service, you just need to

select VoIP or a combination with VoIP. In this

example, VoIP is selected.

Connection

mode

Route

It can be set to route and bridge. In the case of the

voice service, only route can be selected.

VLAN ID of the

WAN interface

200

The VLAN ID of the WAN interface must be the

same as the VLAN ID of the traffic streams

configured on the OLT.

Mode of

obtaining an IP

address

DHCP

There are three modes of obtaining an IP address.

l

DHCP: Obtain an IP address dynamically.

l

Static: Configure an IP address manually.

l

PPPoE: Access in the PPPoE dialup mode.

In this example, the DHCP mode is configured. You

can also select the static or PPPoE mode according

to the data plan of the upper-layer network.

802.1p

6

The larger the service priority value, the higher the

service priority. The priorities are the same as those

planned on the OLT, that is, the priority sequence is

the voice service, multicast service, and Internet

access service/Wi-Fi in a descending order.

Region

China

-

Signaling

protocol

SIP

l

Device software version V100R002C00 supports

the SIP protocol.

l

Device software version V100R002C01 supports

the H.248 protocol.

For the SIP voice service, load V100R002C00

software version if the available software version is

not V100R002C00.

This item need not be configured on the Web page.

If the software version is V100R002C00, only the

page about SIP voice parameters is displayed; if the

software version is V100R002C01, only the page

about H.248 voice parameters is displayed.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-60

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 147 / 232

Parameter

Data

Description

IP address of the

SIP server

172.23.1.2

The IP address of the SIP server must be the same as

the IP address configured on the softswitch.

Domain name

for SIP

registration

softx3000.huawei.

com

The registration domain name must be the same as

the registration domain name configured on the

softswitch.

Telephone

number and

password of SIP

users

l

User 1:

telephone

number

88001234

(77770085);

password

iadtest1.

l

User 2:

telephone

number

88001235

(77770086);

password

iadtest2.

The telephone numbers must be the same as those

set on the softswitch.

SIP digitmap

8800xxxx

7777xxxx(For

web configure)

Indicates that the eight-digit telephone numbers

starting with

8800

are allowed to have voice

services. This parameter must be consistent with the

CO data plan in a specific country/region.

4.5.2 Configuration Flowchart

This topic provides the flowchart for configuring the SIP-based voice service.

Figure 4-47

shows the flowchart for configuring the SIP-based voice service through the Web

page.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-61

Page 148 / 232

Figure 4-47

Flowchart for configuring the SIP-based voice service through the Web page

Figure 4-48

shows the flowchart for configuring the SIP-based voice service through the N2000

BMS.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-62

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Page 149 / 232

Figure 4-48

Flowchart for configuring the SIP-based voice service through the N2000 BMS

Figure 4-49

shows the flowchart for configuring the SIP-based voice service through the TR-069

server.

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4 Service Configuration Examples

Issue 02 (2011-01-26)

Huawei Proprietary and Confidential

4-63

Page 150 / 232

Figure 4-49

Flowchart for configuring the SIP-based voice service through the TR-069 server

4.5.3 Configuration Method

The SIP-based voice service can be configured through the Web page, N2000 BMS, or TR-069

server.

Configuring SIP-based Voice Service Through the Web Page

This topic provides an example of how to configure the SIP-based voice service through the

Web page.

Prerequisite

l

ONT must be added or auto-discovered on the OLT and associated service streams must

be configured on the OLT. For details, see

4.2.1 Commissioning the Interoperation

Between OLT and ONT (Through CLI of the OLT)

or

4.2.2 Commissioning the

Interoperation Between OLT and ONT (Through the NMS)

.

l

The environment for service configuration on the Web page must be available and you

must be logged into the Web page successfully. For details, see

3.2 Logging In Through

the Web Page

.

l

Two telephone sets are connected to TEL1 and TEL2 on the ONT respectively.

Procedure

Step 1

Configure the parameters of the voice WAN interface.

4 Service Configuration Examples

EchoLife HG8240/HG8245/HG8247 GPON Terminal

Service Manual

4-64

Huawei Proprietary and Confidential

Issue 02 (2011-01-26)

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share