1. Home
    2. /
  2. Manuals
    3. /
  3. Huawei
    4. /
  4. HG658c
    5. /
  5. 3
Page 11 / 31 Scroll up to view Page 6 - 10
6
3.2 Setting up a Wireless Connection Manually
Besides using the WPS button, you can also set up a wireless connection
manually.
The following example uses a computer running the Windows XP operating
system to describe how to set up a wireless connection using the
default wireless network name and password:
1. Find the wireless network name (
SSID
) and its password (
WLAN Key
)
printed on the label of the HG658c's rear panel.
2. Start the wireless configuration service of the Windows XP operating
system as follows:
1) Right-click
My Computer
to display a short-cut menu, and then choose
Manage
.
2) In
the
Computer
Management
window,
choose
Computer
Management (Local)
>
Services and Applications
>
Services
.
3) Right-click
Wireless Zero Configuration
to display a shortcut menu,
and then choose
Properties
.
4) Check that
Service status
is
Started
. If
Service status
is not
Started
,
click
Start
.
5) Click
OK
to close the dialog box, and the close the
Computer
Management
window.
3.
Configure the wireless network connection on the computer as follows:
1) Choose
Start
>
All Programs
>
Accessories
>
Communications
>
Network Connections
.
2) In the
Network Connections
window, right-click
Wireless Network
Connection
to display a shortcut menu, and choose Properties.
3) In the
Wireless Network Connection Properties
dialog box, click the
Wireless Networks
tab.
4) Select
Use Windows
to configure my wireless network settings.
5) Click
View Wireless Networks
.
Page 12 / 31
7
6) In the
Wireless Network Connection
dialog box, select the wireless
network whose name is the same as the one you recorded in 1, and click
Connect
.
7) In the dialog box, enter the password you recorded in 1, and then click
Connect
.
After the system verifies the password,
Connected
appears on
the wireless network icon in the wireless network list, indicating that your
computer has established a wireless connection to the HG658c.
8) Close the
Wireless Network Connection
dialog box.
You need to set up a wireless connection only once. You can
access the wireless network anytime you want as long as
the wireless network name and password are not changed. When
the HG658c is working properly, your computer connects to the
HG658c automatically after its wireless function is enabled.
4 Voice Services
The HG656c supports voice over IP (VoIP) services based on Session Initiation
Protocol (SIP).SIP is an application layer protocol used to create, modify, and
end multimedia sessions.
The HG658c's Voice over Internet Protocol (VoIP) parameters are set before
delivery. Generally, these parameters do not need to be modified. You can use
the VoIP services directly.
5 Configuring the HG658c
5.1 Accessing Mobile Storage Devices Using
the FTP Client
The HG658c supports a home storage function. Mobile storage devices, such
as a USB flash drive, can be connected to the USB port on the HG658c. You
Page 13 / 31
8
can then access the mobile storage devices from the Local Area Network (LAN)
or Internet.
To access a mobile storage device:
1.
Connect the mobile storage device to the HG658c's USB port.
2.
Enable the FTP server, and then configure the FTP server settings.
1) Log in to the web-based configuration utility.
2) Choose
Advanced
>
USB Port
.
3) Select
Enable FTP Server
.
4) In
User name
and
Password
, enter the user name and password of the
FTP server (both default values are
ftp
). Keep the default settings of
other parameters.
5) Enter a server port number (default is
21)
in the
Port
text box.
6) Click
Submit
to save the settings.
3.
Start the FTP client, and access the HG658c's LAN IP address through the
FTP server.
1) On your computer, open a web browser.
2) Enter
FTP://192.168.1.1
in the address box, and then press
Enter
.
3) In the
Login
dialog box, enter the user name and password for the FTP
server (values that you set in 2), and then click
Login
.
After the system verifies the user name and password, you can read data from
or write data to the mobile storage device connected to the HG658c.
5.2 Changing the User Name and Password for
the Web-based Configuration Utility
For safety or convenience reasons, you can change the user name and
password for the web-based configuration utility.
To change the login user name and password:
1. Log in to the web-based configuration utility.
Page 14 / 31
9
2. Choose
Maintenance
>
Account
to display the user information
management page.
3. Enter a new user name, your current password, and new password in the
corresponding text boxes. Re-enter the new password to confirm it.
4. Click
Submit
.
After the user name and password are changed, the login page is displayed
again. Enter your new user name and password to log in.
If you cannot remember the user name and password that you
have set, you can restore them to their default settings by pressing
and holding the
Reset
button for over 6 seconds. Once complete,
the login information of the web-based configuration utility is
restored to default settings. When the default settings are restored,
your custom data is lost. Therefore, exercise caution when using
the
Reset
button.
5.3 Changing the Login IP Address
You can change the login IP address of the web-based configuration utility
according to your individual requirements.
To change the login IP address:
1. Log in to the web-based configuration utility.
2. Choose
Basic
>
LAN
.
3.
Enter a new IP address in the
IP address
text box, and then enter a subnet
mask in
Subnet mask
text box.
4. Click
Submit
to save the settings.
To log in to the web-based configuration utility after you change the
login IP address, enter the new IP address into the web browser's
address box. Ensure that the IP address of the computer is in the
same network segment as that of the HG658c to enable the
computer to access the web-based configuration utility.
Page 15 / 31
10
5.4 Enabling or Disabling the Wireless Network
Function
There are two methods for enabling or disabling the wireless network function.
Using the WLAN Button
To enable or disable the wireless network function, press the
WLAN
button
more than 1 second. The
WLAN
indicator light indicates the status of
the wireless network function.
Using the Web-based Configuration Utility
To enable or disable the wireless network function from the web-based
configuration utility:
1. Log in to the web-based configuration utility.
2. Choose
Basic
>
WLAN
.
3. Select
Enable
WLAN
.
Select
Enable WLAN
to enable the wireless network function.
Clear
Enable WLAN
to disable the wireless network function.
5.5 Changing the Wireless Network Name and
Password
The default wireless network encryption mode is
WPA-PSK/WPA2-PSK
. You
can find the default wireless network name (
SSID
) and password (
WLAN Key
)
printed on the label of the HG658c's rear panel.
To change the wireless network name and password:
(This example uses
WPA-PSK/WPA2-PSK
encryption mode.)
1. Log in to the web-based configuration utility.
2. Choose
Basic
>
WLAN
.
3. Select
Enable WLAN
.
4. Enter a wireless network name in
SSID
text box.

Rate

124.8 / 5 based on 304 votes.

Popular Huawei Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top