Huawei EchoLife-HG8247 Router Manual PDF (Setup & Configuration Guide)

Page 181 / 364 Scroll up to view Page 176 - 180

Set the service port indexes to 3 and 4, SVLAN ID to 200, GEM port ID to 2, and

CVLAN ID to 20. Use traffic profile 9.

huawei(config-if-gpon-0/1)#

quit

huawei(config)#

service-port 3 vlan 200 gpon 0/1/1 ont 1 gemport 2 multi-

service user-vlan 20 rx-cttr 9 tx-cttr 9

huawei(config)#

service-port 4 vlan 200 gpon 0/1/1 ont 2 gemport 2 multi-

service user-vlan 20 rx-cttr 9 tx-cttr 9

9.

Configure the queue scheduling mode.

Use the 3PQ+5WRR queue scheduling. Queues 0-4 adopt the WRR mode, with the

weights of 10, 10, 20, 20, and 40 respectively; queues 5-7 adopt the PQ mode.

NOTE

Queue scheduling is a global configuration. You need to configure queue scheduling only once on

the OLT, and then the configuration takes effect globally. In the subsequent phases, you do not need

to configure queue scheduling repeatedly when configuring other services.

huawei(config)#

queue-scheduler wrr 10 10 20 20 40 0 0 0

Configure the mapping between queues and 802.1p priorities. Priorities 0-7 map

queues 0-7 respectively.

huawei(config)#

cos-queue-map cos0 0 cos1 1 cos2 2 cos3 3 cos4 4 cos5 5 cos6

6 cos7 7

For the service board that supports only four queues, the mapping between 802.1p

priorities and queue IDs is as follows: priorities 0 and 1 map queue 1; priorities 2 and

3 map queue 2; priorities 4 and 5 map queue 3; priorities 6 and 7 map queue 4.

10.

Save the data.

huawei(config)#

save

l

Configure the optical network terminal (ONT) on the Web page.

NOTE

Some voice parameters cannot be configured on the Web page but can be configured by importing an

XML configuration file. For details about how to import an XML configuration file, see

3.6.1 Operation

Guide on the XML Configuration File (on the Web Page)

.

1.

Log in to the Web configuration window.

a.

Configure the IP address of the PC network adapter to be in the same network

segment as the IP address of the local maintenance Ethernet port of the ONT

(default:

192.168.100.1

).

b.

Open the Web browser, and enter the IP address of the local maintenance Ethernet

port of the ONT.

c.

On the login window, enter the user name (default:

telecomadmin

) and password

(default:

admintelecom

) of the administrator. After the password authentication

is passed, the Web configuration window is displayed.

2.

Configure parameters of the voice WAN port.

a.

In the navigation tree, choose

WAN

>

WAN Configuration

.

b.

In the right pane, click

New

. In the dialog box that is displayed, configure

parameters of the WAN port as follows:

–

WAN Connection: Enable

–

Service List: VoIP (For configuring the VoIP service, VoIP or a combination

containing VoIP needs to be selected.)

–

Mode: Route

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

173

Page 182 / 364

–

VLAN ID: 20 (The VLAN ID of the ONT must be the same as the user-side

VLAN ID configured on the OLT.)

–

802.1p: 6

–

IP Acquisition Mode: DHCP

c.

Click

Apply

to apply the configuration.

3.

Configure parameters of the SIP-based voice interface.

a.

In the navigation tree, choose

Voice

>

VoIP Interface Configuration

.

b.

In the right pane, configure parameters of the SIP-based voice interface as follows

(other parameters use the default settings):

–

Set

Proxy Server Address

below

Primary Server

to

200.200.200.200

.

–

Home Domain: softx3000.huawei.com

–

Signaling Port: 1_VOIP_R_VID_20

–

Region: CN – China

NOTE

l

The parameters of the SIP-based voice interface must be consistent with the corresponding

configuration on the softswitch.

l

If dual-homing is configured,

Proxy Server Address

below

Secondary Server

must be

configured.

l

If

Signaling Port

is empty, the parameter value is the same as

Media Port

. If the upper-

layer network requires isolation of media streams from signaling streams, create different

traffic streams for the media streams and signaling streams on the OLT, create different

WAN ports on the ONT, and bind the created WAN ports to

Media Port

and

Signaling

Port

.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

174

Page 183 / 364

c.

Click

Apply

to apply the configuration.

4.

Configure parameters of the SIP-based voice users.

a.

In the navigation tree, choose

Voice

>

VoIP User Configuration

.

b.

In the right pane, configure parameters of voice user 1 as follows:

–

Register User Name: 80001234

–

Auth User Name: [email protected]

–

Password: iadtest1

–

Associated POTS: 1 (binding port TEL1 on the ONT)

–

Select

Enable

to enable the voice user configuration.

c.

Click

Apply

to apply the configuration.

d.

In the right pane, click

New

to add voice user 2, and configure parameters of

voice user 2 as follows:

–

Register User Name: 80001235

–

Auth User Name: [email protected]

–

Password: iadtest2

–

Associated POTS: 2 (binding port TEL2 on the ONT)

–

Select

Enable

to enable the voice user configuration.

e.

Click

Apply

to apply the configuration.

NOTE

l

The parameters of the SIP-based voice user must be consistent with the corresponding

configuration on the softswitch.

l

If

Associated POTS

is

1

, port TEL1 on the ONT is bound. If

Associated POTS

is

2

, port TEL2

on the ONT is bound.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

175

Page 184 / 364

5.

Save the configuration.

In the navigation tree, choose

System Tools

>

Configuration File

. In the right pane,

click

Save Configuration

to save the configuration.

6.

Restart the voice process.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane, click

Restart VoIP

.

7.

Check the ONT connection status.

In the navigation tree, choose

Status

>

WAN Information

. In the right pane,

Status

is

Connected

and the obtained IP address is displayed at

IP

.

8.

Check the registration status of the voice user.

In the navigation tree, choose

Status

>

VoIP Information

. In the right pane,

User

Status

is

Up

.

l

Configure the ONT on the U2000.

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

176

Page 185 / 364

NOTE

Some voice parameters cannot be configured on the NMS but can be configured by importing an XML

configuration file. For details about how to import an XML configuration file, see

3.6.2 Operation Guide

on the XML Configuration File (on the U2000)

.

The following uses batch configurations of creating a value-added service profile of the

ONT as an example. To configure an ONT, on the GPON ONU tab page, select an ONT,

right-click, and choose

Configure Value-Added Service

from the shortcut menu.

1.

Log in to the NMS (iManager U2000 V100R003C00) and start the FTP service.

2.

Configure the value-added service profile of the ONT.

a.

From the main menu, choose

Configuration

>

Access Profile Management

. In

the navigation tree of the tab page that is displayed, choose

PON Profile

>

ONT

VAS Profile

.

b.

On the

ONT VAS Profile

tab page, right-click, and choose

Add

from the shortcut

menu.

c.

In the dialog box that is displayed, set relevant parameters.

–

Profile Name: ONT-VoIP

–

Vendor ID: HWTC(2011)

–

Terminal Type: 247

–

Version: V1R002C06-Later

d.

Configure the parameters of the voice WAN port.

a.

In the navigation tree, choose

WAN Device

>

WAN Device 1

>

WAN

Connection

. Select

WAN Connection

, right-click, and choose

Add IP

Connection

from the shortcut menu.

b.

Select

WAN IP Interface 1

and enter (or select) a proper value.

–

WAN Interface Name: ONT-VoIP

–

WAN Enable: enable

–

Connection Type: IP_Routed

EchoLife HG8010/HG8110/HG8240/HG8245/HG8247/

HG8447 GPON Terminal

Service Manual

3 Configuration

Issue 02 (2011-12-08)

Huawei Proprietary and Confidential

177

Rate

Popular Huawei Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share