Page 61 / 112 Scroll up to view Page 56 - 60
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
50
±
Note:
If changing the “Enable Automatic Assigned Default Gateway” from
unselected to selected, you must reboot HG520 to activate the
automatic assigned default gateway
.
5.6.2
Static Route Configuration
1)
Click on <Add> to create a new Static Route
up to 32
entries can be configured.
Figure 5-16
Advanced Setup – Routing – Static Route
2)
Enter the destination network address, subnet mask,
gateway AND/OR available WAN interface, and then click
<Apply> to add the entry to the routing table.
Page 62 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
51
Figure 5-17
Advanced Setup – Routing – Add new Static Route
5.6.3
RIP Configuration
The Routing Information Protocol (RIP) is designed for
exchanging routing information within a small to medium-size network.
Page 63 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
52
Figure 5-18
Advanced Setup – Routing – RIP
To configure an individual interface, select the desired RIP
version and operation:
z
RIP Version 1
: Class-based IP network.
z
RIP Version
2
: Classless IP network.
z
Operation Active
: Broadcast and listen to other RIP
enabled devices.
z
Operation
Passive
: Listen only.
1)
Placing a check in the “Enabled” checkbox for the interface
to complete the configuration.
2)
Click the <Apply> button to save the configuration.
3)
To start/stop RIP for HG520, select the “Enabled/Disabled”
radio button for Global RIP Mode.
Page 64 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
53
5.7
Configuring DNS
5.7.1
DNS Server Configuration
Figure 5-19
Advanced Setup – DNS Server
1)
If “Enable Automatic Assigned DNS” checkbox is selected,
HG520 will accept the first received DNS assignment from
one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s)
during the connection establishment.
2)
If
the checkbox is not selected, enter the primary and
optional secondary DNS server IP addresses.
3)
Click <Apply> button to save it.
Page 65 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 5
Advanced Setup
Huawei Technologies Proprietary
54
±
Note:
If changing from unselected “Enable Automatic Assigned DNS” to
selected, you must reboot HG520 to get the automatic assigned DNS
addresses.
5.7.2
Dynamic DNS Configuration
The Dynamic DNS service allows you to alias a dynamic IP
address to a static hostname in any of the domains. This function
allows your HG520 to be more easily accessible from various
locations of the Internet.
Before you proceed, please visit one of these two website to
apply your own Dynamic DNS service:
www.dnadns.org
or
www.tzo.com
.
1)
Click<Add> to configure Dynamic DNS.
2)
To remove, check the item and click <Remove>.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top