Page 81 / 112 Scroll up to view Page 76 - 80
User Manual
EchoLife HG520 Home Gateway
Chapter 6
Wireless Setup
Huawei Technologies Proprietary
70
specifies the maximum packet size before data is
fragmented into multiple packets. If you experience a high
packet error rate, you may slightly lower the Fragmentation
value. Setting the Fragmentation too low may result in poor
network performance. Only slight adjustment of this value is
recommended.
z
RTS Threshold:
This value should remain at its default
setting of
2347.
The range is 0-2347 bytes. If you encounter
inconsistent data flow, only slight adjustment of this value is
recommended. If a network packet is smaller than the preset
RTS threshold size, the RTS/CTS mechanism will not be
enabled. HG520 sends Request to Send (RTS) frames to a
particular receiving station and negotiates the transmission
of a data frame. After receiving an RTS, the wireless station
responds with a Clear to Send (CTS) frame to acknowledge
the right to begin transmission.
z
DTIM Interval:
This value, between 1 and 255 milliseconds,
indicates the interval of the Delivery Traffic Indication
Message (DTIM). A DTIM interval is a countdown field which
is used to inform clients about the next window for listening
to broadcast and multicast messages. When HG520 has
buffered broadcast or multicast for associated clients, it
sends the next DTIM with a DTIM Interval value. Its clients
hear the beacons and awaken to receive the broadcast and
multicast message. Default:
3
.
z
Beacon Interval:
Enter a value between 1 and 65535
milliseconds. The Beacon Interval indicates the frequency
Page 82 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 6
Wireless Setup
Huawei Technologies Proprietary
71
interval of the beacon. A beacon is a packet broadcast by
HG520 to synchronize the wireless network. Default:
100
.
z
54g Mode:
There are 3 selections. Select
54g Auto
for the
widest compatibility. Select
54g Performance
for the fastest
performance. Select
54g LRS
if you are experiencing
difficulty with legacy 802.11b equipment.
z
54g protection:
In
Auto
mode, HG520 will use RTS/CTS to
improve 802.11g performance in mixed 802.11g/802.11b
network.
Turn
off
protection
to
maximize
802.11g
throughput under most conditions.
Figure 6-9
Wireless Setup – Advanced
6.6
Viewing Station Info
This page shows authenticated wireless stations and their status.
Page 83 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 6
Wireless Setup
Huawei Technologies Proprietary
72
Figure 6-10
Wireless Setup – Station Info
Page 84 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 7
Diagnostics
Huawei Technologies Proprietary
73
Chapter 7
Diagnostics
This page allows users to test the Ethernet port connection, DSL
port connection, and connection to the Internet Service Provider.
If a test displays a fail status, click <Return Diagnostic Tests> at
the bottom of the page to make sure the fail status is consistent.
If the test continues to show fail, click <Help> to go to the
troubleshooting procedures.
Figure 7-1
Diagnostics
Page 85 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 8
Management
Huawei Technologies Proprietary
74
Chapter 8
Management
8.1
Settings
System Administrator can do the HG520 settings backup, update,
and restore default here.
The settings can be saved from HG520 to computer. The saved
setting file can also be loaded from computer to HG520.
These 2 functions can help the system administrator to manage
large amount of HG520 efficiently. Restore Default will set the HG520
with the factory default configuration.
Backup the current configurations, click on <Backup Settings>,
and a File Download window will pop up.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top