Page 91 / 112
Scroll up to view Page 86 - 90
User Manual
EchoLife HG520 Home Gateway
Chapter 8
Management
Huawei Technologies Proprietary
80
If the selected mode is “Remote” or “Both”, events will be sent to
the specified IP address and UDP port of the remote syslog server.
If the selected mode is “Local” or “Both”, events will be recorded
in the local memory.
Click on <Save/Apply> to save the configuration.
Figure 8-6
Management – System Log Configuration
Click on <View System Log> to see the router log based on your
configuration.
Page 92 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 8
Management
Huawei Technologies Proprietary
81
8.3
Configuring SNMP Agent
System Administrator could enable or disable the embedded
SNMP Agent here. SNMP Agent will allow a management application
to retrieve HG520 statistics and status.
Figure 8-7
Management – SNMP Agent
8.4
Configuring Internet Time
HG520 can synchronize its internal time with Internet time server
when available.
Page 93 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 8
Management
Huawei Technologies Proprietary
82
Figure 8-8
Management – Internet Time
1)
Check “Automatically synchronize with Internet time
servers”, to enable this function.
2)
Select First and Second NTP time server from the pull down
menu. Or select “Other” and define your preferred NTP
server.
3)
Choose the time zone from “Time zone offset”.
4)
Click on <Save/Apply> to save the configuration.
8.5
Configuring Access Control
HG520 browser management tool is protected by three
categories: Services, IP addresses, and Passwords. All three must be
matched, if configured, to gain access to the management tool.
All services are enabled from LAN side and disabled from WAN
side by default.
Page 94 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 8
Management
Huawei Technologies Proprietary
83
Figure 8-9
Management – Access Control - Service
If
the IP Address Access Control mode is enabled, permits
access to local management services from IP addresses contained in
the Access Control List.
If the Access Control mode is disabled, the system will not
validate IP addresses for incoming packets. The services are the
system applications listed in the Service Control List.
Click <Add> to add an IP address to the Access Control List. To
remove, mark the Remove option of the specified IP address, and
then click <Remove> to remove the IP address from the Access
Control List.
Up to 16 hosts can be configured here.
Page 95 / 112
User Manual
EchoLife HG520 Home Gateway
Chapter 8
Management
Huawei Technologies Proprietary
84
Figure 8-10
Management – Access Control – IP Addresses
Access to your router is controlled through three user accounts:
admin
,
support
, and
user
.
admin
: has unrestricted access to change and view HG520
configuration.
support
: is used to allow an ISP technician to access HG520 for
maintenance and to run diagnostics.
user
: can access HG520 to view configuration settings and
statistics, as well as update HG520 software. Use the fields below to
enter up to 16 characters and click <Save/Apply> to change or create
passwords.
19216811.live