1

Thank you for purchasing WiMAX CPE!

Before you begin

Check the following items in the product package. If you find anything missing or damaged,

contact the service provider.

±

WiMAX CPE

±

Dedicated Power Adapter

±

Ethernet Cable

±

Quick Start

±

Qualification Card

Getting to Know Your CPE

The supported functions and actual appearance of the CPE may vary with the product you

purchase. The following pictures are provided for illustration purpose only.

Top Panel

WiMAX

TEL1 TEL2

POWER

2

Indicator

Status

Description

On

The indicators indicate the signal strength of the

WiMAX network.

When all the indicators are on, it indicates that the

signal strength is at the highest level.

Blink

The CPE is being upgraded when they blink

sequentially.

The software is damaged when they blink randomly.

WiMAX

Off

There is no WiMAX network signal.

On

The TEL interface is being used.

Blink

The TEL interface has an incoming call.

TEL1-TEL2

Off

The telephone connected to the TEL port hangs up or

the TEL interface is disabled.

On

The CPE is powered on.

POWER

Off

The CPE is powered off.

Notes:

±

WiMAX: Worldwide Interoperability for Microwave Access

±

CPE: Customer Premises Equipment

Rear Panel

LAN4

POWER

LAN1

LAN2

LAN1

LAN2

LAN3

LAN3

LAN4

TEL1

TEL2

3

Interface/Indicator

Description

POWER

The interface is used to connect to the output interface of the

power adapter.

LAN

The interfaces are used to connect the CPE to the computer or

the switch.

The indicators are used to indicate the status of the devices

connected to the corresponding interfaces.

TEL

The interfaces are used to connect a telephone line.

Side Panel

The preceding figure shows the appearance of the side panel that is rotated 90 degrees

counterclockwise.

RESET

Button

Description

RESET

Press and hold the button for one to eight seconds to restart the CPE.

Press and hold the button for over eight seconds to restore the default

settings of the CPE.

Once you restore the default settings, all the customized data will

be lost. Use this function with caution.

4

Preparing for Installation

Selecting a Proper Installation Position

±

Obstacles such as concrete or wooden walls may affect the transmission of WiMAX

network signals. Therefore, install the CPE in an open space.

±

Keep the CPE away from any household appliance that produces a strong electric or

magnetic

fi

eld, such as a microwave oven, a refrigerator, or a satellite dish antenna.

Positioning the CPE

Rotate the support a maximum of 90 degrees counterclockwise as shown in the following

fi

gure.

Connecting the Cables

CAUTION:

During lightning storms, power off the CPE, disconnect the CPE from the power supply, and

do not touch the antenna.